Question about Car Audio & Video

1 Answer

Dont know how to set my crossover! mtx rt-x03a

Posted by on

  • 1 more comment 
  • anthuanprez Mar 06, 2009

    ok thnx!!!! but i still dont know were to connect the rca for the amp (bass) and 4 the door speakers..

  • anthuanprez Mar 06, 2009

    but i still dont know how to connect thrca 4 the bass amp and 4 the speakers.

  • anthuanprez Mar 06, 2009

    thnx ones again!!!!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

This unit had a couple unique features: a center channel (summed) output and a differential output (right channel is subtracted from the left). Once you figured out you lows, mids, and highs. Center and rear. I recommend buying a cd to test out your sounds like your high, mids, and lows

Posted on Mar 06, 2009

  • Henry KAo Mar 06, 2009

    its a 3 way unit, so if you have amp for your treble and mid range and your bass. So connect your output from your x-over to the input on your bass amp. and turn down the treble setting and the midrange set and the bass should be to you liking.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i hook up my MTX electronic crossover rt x01a to myvhome reciever


yes you can. you need a 12v power supply for you home. Purchase a 12v 5a supply and set it up like you would in a car.

Nov 10, 2013 | Car Audio & Video

1 Answer

I have 2 different subs in one box, a 12" MTX thunder and a 12" Kicker CVR. the kicker is a dual voice coil while the MTX I dont believe is. Can I use one amp for this set up? And how would it be wired?


im guessing both speakers are 4 ohms ..mtx 4ohms and kicker dual 4ohms..now if your amp can go down to 1 ohm wiring the kicker dual coils in parallel (2ohms) and the mtx connected together (4ohms) should leave you with a final impedance between 1 and 2 ohms ...i suggest you use one or get another

Oct 08, 2013 | MTX Car Audio & Video

1 Answer

Mtx mxa 6001 amp cant get it to produce good bass using mtx 5500 subs running a 2ohm load


You seem to have everything in spec. check your crossover points and your speaker wiring. subs may be playing out of phase.
A huge factor is subwoofer enclosure ...if the enclosure is not in spec with sub requirements the subs will not peform great.

Sep 23, 2013 | Car Audio & Video

1 Answer

Tryin to hook up a mtx electronic crossover rt-01a. i dont know how to hook it up


Your basic crossover is going to have a power (+) and ground (-). Your power wire goes to the battery, and your ground goes to the frame. You will need to hook up your RCA or speaker wires to the input side. Then hook the other two RCA connections to your amp.

Apr 13, 2011 | MTX Car Audio & Video

1 Answer

I want to change the crossover unit in my mtx pro 2400's


I would reccomend that you change out the drivers themselves that have a deepened low-end frequency resposnse. But, changing the crossover just might tweak the sound to your tastes better, and cheaper. Here is a link to a website that I often order from whenever I need something Audio/Video related. They have a reliable support staff, and usually products arrive a day or so sooner even with basic shipping. Prices are good too. Good luck,

Hortona
http://www.parts-express.com/

Mar 25, 2009 | MTX 12" 2-Way Professional Loudspeaker...

2 Answers

Any ideas?


CHECK YOURE EQ OR TRY TO BYPASS THE EQ FOR TESTING

May 08, 2008 | MTX Thunder 1501D Car Audio Amplifier

2 Answers

Help putting code in


hello i have 2 audiofinics adf-272 i dont know what kind of amp to hook up with it which one do u think is best for them a mtx 4051 500 watt class d mono block or a mtx 801d 800 watts

Jan 27, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

692 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4807 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...