Question about Kenmore Washing Machines
F 11 error is going to be the ccu board or mcu board and possibly your motor.check wiring harness to motor control unit and look to see if their are any runs in board also do the same with central control unit.
Posted on Mar 06, 2009
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 30, 2016 | Dryers
Mar 24, 2015 | Kenmore HE3t 4.0 cu. ft. Front-Load King...
Washer will suddenly stop with 1 minute left on cycle and shows the F11 error code...at times it may show the FdL code. The washer will then not finish no matter what I do. If I unplug the unit from the outlet that does not guarantee that when I plug it back in it will start up. Fifty percent of the time it still shows the F11 error. It can take hours to finally get the washer to cancel out so I can take the laundry out that has not been spun out.
The F11 error code indicates a serial communication problem between the central control board and the motor control board. This can be caused by:
The diagnosis of this failure usually requires a technician. If you are able to unplug the washer and safely access the central control board and motor control board, you can check for a loose wire harness connection.
Jan 24, 2011 | Kenmore Elite 45986 Front Load Washer
Aug 26, 2010 | Kenmore Elite 45986 Front Load Washer
Dec 24, 2009 | Kenmore Elite 45986 Front Load Washer
Oct 23, 2009 | Kenmore Elite 45986 Front Load Washer
Jun 26, 2009 | Kenmore Elite 45986 Front Load Washer
Feb 23, 2009 | Kenmore Elite 45986 Front Load Washer
Sep 03, 2008 | Kenmore Elite 45986 Front Load Washer
148 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: