Question about Rowenta DX6700 Iron

1 Answer

Where can i bring my iron for repair

In the palm beach gardens or west palm beach, florida area

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 653 Answers

There are three Rowenta factory service center in the US, but the closest is in New York. The list of service centers can be found at http://www.rowentausa.com/rowenta/frame.aspx. There are several appliance repair facilities in your area. A list of nine of them can be found at http://www.servicemagic.com/c.Appliances.West_Palm_Beach.FL.-12003.html. Considering the cost of repair and/or shipping, you might want to weigh the option of just buying a new iron. If the problem is just that it is not putting out any steam, you could try filling with white vinegar to dissolve any calcium build-up. If you found this helpful, please don't forget to rank this solution.

Posted on Mar 15, 2009

  • Fahr Quad Mar 25, 2009

    So how did things work out?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The red security light is on permanently


You have to try resetting the system. First turn the breaker off for the condenser and wait about 20 seconds. After you turn it back on the system should reset. If the light stays on then you have an issue with the unit and i would get a professional to help.

West Palm Beach Air Conditioning

Feb 15, 2015 | Tefal Irons

1 Answer

Were can i take my rowenta steamer for repair in the 90035 los angeles area


Anaheim, Berkley, Fresno, Bakersfield, Los Angeles,
Long Beach, Sacramento, San Diego, San Jose and San Francisco.

Google Rowenta repair Center, choose a city and go!

Jul 24, 2014 | Rowenta Commercial Garment Steamer - White

1 Answer

My hamilton beach iron will not steam


see the diagram and see if there are any part broken, or worn and replace. Tank or ports clogged.and repair
9_10_2012_11_17_37_am.jpg

Sep 09, 2012 | Hamilton Beach 14210Z Nonstick Iron with...

1 Answer

Water leaking out of iron no steam I have a Hamilton Beach Steam Storm Model 14560 Lost manuel


The Use and Care Guide for the Hamilton Beach Iron can be downloaded here:

http://useandcares.hamiltonbeach.com/files/840091300.pdf

If water is leaking out of the iron:

• Do not overfill the water tank.

• If steam ironing, is Adjustable Steam Knob in a steam position that matches Temperature Control Dial steam range? Did the iron have enough time to preheat?
• If dry ironing, make sure the Adjustable Steam Knob is in the DRY IRON position.

Jun 20, 2011 | Hamilton Beach Steam Storm 14560 Iron

1 Answer

My iron's MODEL: 14977Z The iron's red light is on but won't heat to iron. was working a couple of hours ago


This is typical of a iron, it is cheaper to replace than to repair. The heating element is broken.

Jun 02, 2011 | Hamilton Beach 14977 Iron with Auto...

1 Answer

My iron shuts off when I am continuously ironing.


The flashing is a indication that somthing is failing.. More than likely it is a internal component..
It might be most efficent to get a new one..
Or bring it back if it is under warranty..

Good luck..

Sep 23, 2009 | Hamilton Beach 14977 Iron with Auto...

1 Answer

Hi, My Tefal Express Steam Iron is not working. The steam will not work and brown water is pouring out the bottom of the iron. I need to know where I should get this repaired in Inner West...


Do you use any additive to the water when you iron?
Do you empty the water out after use ?
Brown steam / water suggests foul water, or rust due to dirty water pipes on Iron.

With regards to 'not working' - do you have any lights on, or is it dead.
(I had one of these, the mains lead within the flex holder had broken - design flaw) - managed to repair.

Aug 11, 2008 | Tefal UltraGlide Easycord FV4256 Iron

1 Answer

Hamilton Beach Ultra Steam Iron Model #15410


Hi,

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Jul 06, 2008 | Hamilton Beach UltraSteam 15410 Iron

Not finding what you are looking for?
Rowenta DX6700 Iron Logo

Related Topics:

576 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rowenta Irons Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Rowenta Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...