Question about Apple iPod nano 4th Generation

1 Answer

Ipod using too much battery power

I have a 4th gen. ipod. How do you turn off the alblum shuffle screen when it's turned on it''s side?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

To turn off shuffle, enter the "Setting" menu, then select "Shuffle" use the forward/back buttons to change the value to "off". To turn off the "Shake" feature, again, enter the "Setting" menu then scroll down and enter the "Playback" menu. switch it to "off".

Posted on May 24, 2009

5 Suggested Answers

  • 1 Answer

SOURCE: my ipod is on but blank screen

just leave it and let it run flat then charge it again then its good as new

Posted on Apr 03, 2009

dvdcdlaser
  • 1285 Answers

SOURCE: Ipod shuffle (2nd gen) completely dead

you are still under warranty...take it to the sony apple store...they will fix it /replace it or tell you there is cost if it not the battery (note do not tell them you charged overnight, and for the future do chage any gadgets more than 3-4 hrs) when you do charge over night you are actually shorten the battery life span or overcharge....so as soon as you come home from school,work,whatever cell/ipod or any other device needs to be charge...charge it now and unplug before you go to bed....

Posted on Jul 05, 2009

  • 5 Answers

SOURCE: ipod shuffle 2nd gen won't shut off with switch

maybe you have both swich to the same side

Posted on Aug 17, 2009

  • 1 Answer

SOURCE: Ipod Nano 4th gen LCD backlight not working

Its definitely the logic board (motherboard) that has gone bad. Its not the actual screen nor LCD. Its the logic board. You could replace the screen with a new onje and the backlight still will not work. Nano's are known for this but of course apple won't admit to putting out a piece of **** logic board in all of the nano's or they would have to recall 10 million of them! So, they just play stupid and say your nano is out of warranty but we'll give you a 10% trade in discount. What a joke! I know this because i used to work for Apple ;-) They screw customers left and right to keep their profits up.

Posted on Mar 27, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to download certain songs to my new Ipod shuffle. I do not want to download everthing Is there a way to choose which songs you want to put on your ipod?


The only songs you can download have to come from the iTunes store. Set up an account with a credit card, and you can order single songs, albums or videos, plus some free content. Some albums are sold as whole albums, but that is not the norm.

If you have music on your computer, you can download iTunes to it, and try and drag tracks by having the iTunes window open to your iPod, and the other pane open to your music. Highlight and Right Click Drag - Copy here.

The legit way is to pay Apple $38 to allow you to put non iTunes music on their device.

Jan 10, 2017 | Apple iPod Audio Players & Recorders

1 Answer

I have a Toshiba Satellite A665-S6088. The last time I used it was last night and everything worked fine. It works with Windows 8.1, it has for a few months now, never had any problems until now. No...


Unplug the unit from ac power. Remove the battery. Wait a minute. Press and hold down the power button for 30 seconds. (Yes, I know, nothing will happen visible). Replace battery. Plug unit back in. Now try the power button and see if the unit resets. Sometimes this helps when all else fails especially with a computer which has "hung up" like yours. Let me know if this worked!

Aug 26, 2014 | Audio Players & Recorders

2 Answers

Marantz how to connect 6005 amplifier to ipod


There are many solutions, I show two. The tip photo, shows a more expansive one. the lower photo the cheaper one. But both have two tulip plugs on the side for the amplifier and one 3,5 mm stereo telephone plug to the other side.
I tried both on a good stereo set, and could not hear different quality in sound. My guess, the quality comping from my iPods, iPhone and iPad is not the same as from my CD player. On the CD player, a better cable proved to give a better sound.


c25e6b72-61d1-4158-8864-9fee0335d5fc.jpg 0c90f720-e235-4415-a30c-8a9f98411676.jpg

May 26, 2014 | Audio Players & Recorders

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

1 Answer

How to reset my combination lock number on ipod A1236


Hi William
If you have forgotten the code or put the wrong code in your ipod, you can unlock the Ipod by doing the following:
Connect your IPod to the primary computer you use it with (the first one Ipod synced with), and open iTunes.
When you disconnect iPod from the computer, it will no longer be locked.
If you can't unlock Ipod using either (the code or connecting it to the computer you use to manage its songs). . . you can restore your ipod to factory settings using ipod Updater.
Please note that this will erase all data on your ipod.
Afterwards, you can add your music and data back to your ipod.
If you want to change the primary computer that your Ipod is associated with, do this:
1. Restore your iPod. WARNING: The restore process cannot be undone.
All of your songs and files will be deleted.
Always make a backup of your important data.
2. Connect your ipod to the computer that you want to be the primary computer.
3. Open iTunes and synchronize.
If you can't unlock your ipod and you don't have access to the primary computer, your only option is to restore the Ipod, which will erase all music and data.
Please take time to rate me
Bud

Apr 03, 2013 | Audio Players & Recorders

3 Answers

Pioneer Model: DEH-P8400BH


Press and hold the source button until the CD Receiver turns off. Press and hold the center of the volume knob top bring up the settings menu rotate the volume knob until Clear memory is displayed and then press the center of the volume knob Clear memory YES will be displayed, press the center of the volume knob to confirm. The display will change from Clearing to Cleared

Aug 07, 2012 | Pioneer Deh-p8400bh Cd/mp3/ Receiver W/...

1 Answer

I have a 1970's Panasonic Flip Clock Radio. (Model RC6530) The radio works just fine, but the flp clock stopped flipping. There is power going to the unit. I can also hear a low hum from the flip...


It looks like your problem might be an easy fix, at least. If the gear train between the motor and clock got stripped, you'd be in a bit more trouble. If the motor just isn't spinning, remove it from the side of the clock housing. There are 2 screws (or nuts) holding it in place. When you get it off, the cover for the motor will also be off. Apply some 3 in 1 oil, or perhaps just a tiny bit of penetrating oil, and give it a spin. From what I've read, it should do just fine. A lot of people use wd40, but I understand that can gum up over time.

This is a "at your own risk" type of repair, but as long as you unplug it before dismantling the radio, I think you'll be fine.

Feb 10, 2012 | Audio Players & Recorders

2 Answers

My ipod is just playing without the sound carrying through to the speakers. I dont know how to make it work?


Verify there is nothing plugged into the headset port, including headsets, headphones, or adapters.
Original iPhone only: While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris in the headset port:



To remove debris in the headset port, try connecting a pair of headphones to the headset port and then remove the headphones. Repeat this several times.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
If that doesn't work, try restarting the iPhone. Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
If restarting the iPhone doesn't resolve the issue, try restoring the device.

May 28, 2011 | Audio Players & Recorders

2 Answers

Backbeat 903 I tried to pair them but they don't with my g1


1. turn off the headphones
2. turn on bluetooth on g1
3. hold down the power button on headphones until u see the red and green light flash back and forth. (may take 8 seconds or so)
4 search for devices on g1
5. pair them. if it ask for code it... 0000 (4 zeros)

Nov 16, 2009 | Altec Lansing Audio Players & Recorders

Not finding what you are looking for?
Apple iPod nano 4th Generation Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

mac colar

Level 2 Expert

421 Answers

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...