Question about Projection Televisions

2 Answers

I hope you can help me.. I own a Samsung DLP TV model no. HL56A650C1F, 56". The problem I am having is that it just turns off by itself and attempts to restart itself continuously. I hear all of the normal start up sounds, the lamp comes on, the fans work, and after about 15 seconds the picture comes on and there is sound, and 5 seconds after that it shuts off, and the restart begins again. It won't stay on but for 5 seconds, then the chime sounds and it begins the start up process all by itself. The only way to stop it, is to unplug the TV. You can't stop it by pressing power on the TV or the remote. Is this a bad power supply or a bad ballast. I have been reading a lot of posts but nothing exactly like this.. Please can you help? I am pretty sure I can replace the part myself, but was wondering if you could steer me in the right direction. Thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I hope you can help me.. I own a Samsung DLP TV model no. HL56A650C1F, 56". The problem I am having is that it just turns off by itself and lights "stand by" and "lamp" are flashing at same time.Sometimes, when I'm trying to turn it on- it shuts off by it self.

Posted on Nov 08, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 294 Answers

IT COULD BE YOUR POWER SUPPLY BLOCK OR JUST YOUR POWER CORD

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Broken 56" Samsung 1080P DLP There


Hi
A common problem for these is bad capacitors in the power supply, Remove the back from your Tv and look at the power supply on the left hand side.

You will see roughly around 9 x capacitors that are bulged / domed shaped on top usually these are valued at 3300uf 10V any that have bulged or leaked a brown like substance should be changed.
This will cure the problem as they overheat being sat next to a heatsink that gets very hot!
Try and change them for the same 3300uf but a higher voltage.
Hope this help to rectify the problem.... and do take care in handling the Television

May 13, 2011 | Samsung 56" Slim-Depth LED DLP HDTV

1 Answer

I was in the middle of a movie and my room started to smell like burnt popcorn then the tv shut off and it would not stop trying to come on and off every 40 seconds the picture would come on but just for a...


It sound like you have a power supply fault caused by a display failure.
Without a service manual and test gear, I don't think there is much likelyhood of an effective repair.
Contact Samsung for a dealer in your area is my advice.
Hope that helps.

Nov 22, 2010 | Samsung 56" Slim-Depth LED DLP HDTV

1 Answer

Started making a humming or vibrating sound, and the color and resolution went bad at the same time. Now when I attempt to turn it on, I get the same vibration sound and nothing else.


This tv have a colors wheel,it dead.Require changing.Humming or vibrating sound,Flashes pictures black&white.The colors wheel is dead and it not spinning in it axis motor correctly anymore.Hire a tv Tech. to change the colors wheel,it very hard to change the colors wheel.Because u have to take out many machanical parts,even before u can get to the colors wheel itself.

Oct 14, 2010 | Samsung HL-R5656W 56" DLP HDTV

1 Answer

I have a Samsung 56" DLP tv. was watching and it went off. light on lower front blinks 3 times, when attempt to turn on. Could it be the lamp light?


Does these LED indicator lights that blinks?It is one of the LED light said lamp or bulb?The tv been used alots,and it at lest 2 years.U have not change the tv lamp or bulb to this tv?Change it,life of the lamp it over.

May 03, 2010 | Samsung HLP5067W Television

2 Answers

Shadow appeared on my DLP TV after replacing the lamp


this is a light tunnel failure this component will have to be replaced and is a part of the light engine

Feb 14, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Zenith 56" DLP Z56DC1D won't turn on


Replace Lamp and CK both Fans to make sure they are running.If Fan behind Lamp does not run TV will not light LAMP.

Jul 20, 2009 | Zenith Z56DC1D 56" Television

1 Answer

My samsung DLP hls5687wx xaa shuts off by itself. How do I fix it?


The lamp ballast or Color wheel might be the problem. We have experienced both issues with the tv shutting down. Also check the hours on your lamp as it might be getting old.

Jul 07, 2009 | Samsung 56" Slim-Depth LED DLP HDTV

1 Answer

Samsung DLP 56' TV turns itself off when I initially turn it own. (I turn it on, then it shuts off for approximately 5-10 seconds and turns back on. Sometimes it does it a couple of times before it stays...


The problem is with the ATT UVERSE HDTV BOX and not the Samsung DLP TV. There is an inherent problem with the ATT UVERSE HDTV Box when using a HDMI cable. This was verified by the ATT UVERSE Technician.

Thanks,

Dec 13, 2008 | Projection Televisions

2 Answers

HL-S5687 DLp tv


your keeping a part that is warming up and shuts down your shutdown that protects the tv from burning up... cooler... to find this you might need a hair dryer or a can of freeze mist.
I believe the left side is your high-voltage section.
you can also let it warm-up without the fan .. let it shut down and feel parts with set unplugged to see what is running hot.

Oct 22, 2008 | Samsung DLP HL-P4663W 46" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

611 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...