Question about Whirlpool LER4634J Electric Dryer

1 Answer

Dryer dead dryer will not come on at all

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 107 Answers

Check breaker for 240V (electric), 120V(gas). Check door switch button or lever. Possible control problems (if all digital).

Posted on Mar 13, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hotpoint ctd40 tumble dryer gone dead changed the fuse still dead any ideas ???

Check the mains lead for continuity! Thats making sure the lead to the dryer is not broke anywhere internally.
It may mean removing panel to get access to where the mains lead goes into the dryer, You can do this with power off, check with a multimeter that both the brown wire and blue wire as well as the green and yellow earth wire has continuity from the plug to the dryer!!

Mar 27, 2016 | Hotpoint Dryers

2 Answers

What could cause dead animal odor from my whirlpool cabrio dryer?

check in the dryer's exhaust hose right behind it, there could be a dead animal in it. I had a squirrel in it once. true story :S

Sep 02, 2015 | Whirlpool Dryers

1 Answer

Unimac dryer is now dead. Before it died a load crackeling noise was coming from the definite purpose contacter. Then the dryer died. Replaced contacter and bus fuse and dryer is still dead. Any...

Check to see if you have power to the coil on the contactor is what I would do. Might be a bad coil on the contactor also if power is going to that coil.

Dec 09, 2013 | Dryers

1 Answer

Dryer is dead .does nothing

Try turning off the power at the main house breaker, then turn it back on. If nothing happens you probably blew a fuse in the control panel.

Jan 20, 2013 | Roper Dryers

1 Answer

Dead. As if unplugged. Checked breakers et al.

1.Check dryer door switch.
2.Hold dryer door switch and listen.
3.Place a jumper wire between the switch prongs.

Mar 05, 2010 | Whirlpool LEB6200 Electric Dryer

1 Answer

Bad odor from dryer

A dead mouse would have crawled up fro the bottom. Carefully tip the unit back and see if you have an unexpected guest.

Feb 16, 2010 | Maytag Dryers

1 Answer

My dryer is dead there is no buzz when you tun it on its dead, it worked one minute and just dead the next what could it be

a blown fuse inside the cabinet. this needs a serviceman to remove the cover to access

Aug 17, 2009 | Dryers

1 Answer

Neptune dryer does not produce heat md5500

Did you cheak for dead short by touching one end of the element and one end on the heater housing?if there is continuity then you have a dead short .The lint is normal just clean it out.You may have a bad insultor that the element runs true in the heater housing.Also cheak the wires for dead short very carfully with flash light hope this helped:)

May 19, 2009 | Maytag Neptune MDG5500AW Gas Dryer

2 Answers

Completely dead

circuit breaker tripped, fuse blown in dryer.........

Apr 05, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Whirlpool LER4634J Electric Dryer Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides