Question about Philips Digital Cameras
I have the same one, my memory is fine,, load software, plug in usb cable to computer and camera, then load main program from cd that came with unit, it will install the viewer program and when it ask you do you want to load driver,, say yes and click ok, reboot computer , open program MYCam from your screen, go to Mode, then go to PC - Camera mode, its a easy program to use, i'm sure you will be fine now.. good luck from Pa
Posted on Nov 02, 2009
Ok, I looked all over for the instructions. But there aren't any. I can give you a generic method, but it will only work if you have the driver installed. I'm going to assume you do.
Turn the camera off (if it in fact has an off button).
Plug the camera into your pc.
Turn the camera back on.
Go to My Computer and look for it in the removeable drives.
If it's there, double click on the drive and drill until you find your pics.
Posted on Mar 06, 2009
Tips for a great answer:
Oct 16, 2016 | Digital Cameras
Feb 23, 2011 | Digital Cameras
Aug 29, 2009 | Digital Cameras
Mar 16, 2009 | Fuji FinePix A345 Digital Camera
May 13, 2008 | Sony Cyber-shot DSC-W55 Digital Camera
Feb 09, 2008 | Digital Cameras
Jun 06, 2007 | Kodak EasyShare Z710 Digital Camera
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: