Question about RCA 35V432T 35" TV

1 Answer

RCA 35V432T 35" TV with crunched pcb (crt itc008 2127952A)

My friend has a RCA 35V432T 35" TV and during a recent move to a new house it was shipped laying flat on its screen on a couch. The problem is somebody used it for a step ladder! When he turns it on the power light comes on but the screen is black and he noticed that a vent on the back cover was smashed in. So I took the back off of it thinking maybe one of the circle of solder spots on the circuit board on the back of the tube had broken like I have fixed on pc monitors before. It wasn't very hard to see why it wasn't working. That pcb (crt itc008 2127952A) on the end of the tube was broken into pieces right around those solder joints that are in a circle. I checked the fuse and it was still good so I wonder if somehow nothig shorted when it was first turned on with the crunched board? So I guess the next step is to order a new one and solder it in. Anybody got any idea what's the chances it will work again? Any suggestions or comments as to how to go about fixing this would be great.

chassis # ITC008MYN
Thanks in advance
Jeff

Posted by on

  • 4 more comments 
  • jerry5675 Mar 05, 2009

    Thanks for replying the tube is not broke i desolderd the 2 or 3 connecters and wires off the board and unconnected the connector on the bottom of neck but i cant seem to get the round plastic connector off of the neck that has the pins in it do i need to take it off? do u suppose it was just luck that there was not a short in one of those 6 or nine solder joints in the circle that were all broken on that board/? where should i order a new board from RCA? Thanks for any help on this

  • jerry5675 Mar 06, 2009

    Anybody know where to get a replacement circuit board # crt 2127952A that goes on the end of the tube and has the circle of solder joints and a couple connectors and wires that go to it?

  • jerry5675 Mar 06, 2009

    the part that should have come off with the board didn't and i am having a hard time figuring out how it comes off? is there a connector tab or release clip type of thing or does it just come straight off or twist? I am afraid of breaking the tube or what appear to be notches kinda like teeth that it slides onto if u know what i'm saying cuz i dunno if I do LOL

  • jerry5675 Mar 06, 2009

    Thanks for looking anyways I appreciate it.. that would be cool to find a board just laying around in somebodys collection that they would wanna get rid of kinda cheap. Then I could just fix it for my boss without going through the whole ordering paypal process etc.. about How much would one cost anyways?

  • jerry5675 Mar 06, 2009

    that would be awesome my email is jerry5675@yahoo.com that is also my yahoo messenger name the jerry5675 that is. i live in simi valley calif email me or add me to ym and i will give ya address and cell # if ya want? thanks dude

  • jerry5675 Apr 27, 2009


    dogey you are the man! The crt board he sent me in the mail worked like a charm. I just soldered the ic chip and the socket from the old crunched board onto the one he sent me. and followed the instructions he gave me and it fired right back up like new! what a great site this is! Thanks again Dogey for helping me and answering all my many questions..

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

If the tub is not broke at the neck where the crt plugs on and the pins are all still there the there is a good chance that it will still work. You realey wont know untill you try and see. some shops might have a used crt board if they have had a tv come in struck by lighting and saved the board for what parts that was still good.I know i do that a lot. Dont think I got one for a 35 inch though.

Posted on Mar 05, 2009

  • 1 more comment 
  • vic richards Mar 06, 2009

    gess what i just happen to have a ict008 chasie laying in the junk. It syill has the crt board on it but looks like i took off the ic chip I dont know what size tube it came off of but sure it was not a 35 inch.

  • vic richards Mar 06, 2009

    ment to tel you the white plastic onthe end of tube leave it there the other white plastic should of came off with the board

  • vic richards Mar 06, 2009

    It probley is stuck jamed on the tube from being steped on. Sometimes are hard to get off even if not steped on. There is no tabs that i know of when you pull the board off without unsoldering anythin there is a white plastic socket that comes off with it. On the end of the tube there is a white palastic that stays on the end of the tube that the little wire pins comes through the plastic that stays on tube is a holder for these pins and lets you only be able to plug the crt board on one way. You may have to get a little bit rough, May have to take a knife and try to pry it off . Could take a drimal tool and split the one plastic. I dont know if you have ever took a crt board off a tube before or not but if not look on the computer to see if youcan find a picture as to what they look like so you can under stand what im talking about. Should be able to srarch for crt socket or board and find something.If I had your email i would contact you and see about sending you the one i got it might be the same on or you might be able to take the twoand make it work.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a RCA 35V432T. The TV is not turning on, I can hear it clicking on and off only. Any ideas?


Hi - probably not worth fixing, I'm afraid. That set is a lower-end RCA with a common problem, the EEPROM chip needs to be replaced.

Feb 28, 2011 | RCA 35V432T 35" TV

1 Answer

RCA 35v432t won't turn on


have a technician check it ...might be a power supply gone bad

Aug 11, 2009 | RCA 35V432T 35" TV

1 Answer

Need part number for flyback for 35v432t Rca set


you will find this serial on your flyback inside the tv

Dec 12, 2008 | RCA 35V432T 35" TV

1 Answer

No have pasword frontal panel


try unplugin tv for about 2 days just maybe it will go back to factory seting for you that is clear itself or you can try entering all 0000 that is usley the factory code some times 1234 works.

Jul 12, 2008 | RCA 35V432T 35" TV

1 Answer

Doesn't rcognize DVD players


You aren't trying to use channel 3 or 4 are you? That's for RF connections only.

There are probably AV input channels on the set that aren't accessible from the channel up/down buttons. On my set there is another button to switch between inputs and channel select.

Mar 23, 2008 | RCA 35V432T 35" TV

2 Answers

Rca 35v432t


MHF318-19-4Z24

Mar 01, 2008 | RCA 35V432T 35" TV

1 Answer

RCA 35V432T Dead Set


Check for a high voltage power supply section of your TV set...
Especially in flyback transformer.Be careful to do so because the output voltage of the flyback transformer is almost thousand volts.

Oct 17, 2007 | RCA 35V432T 35" TV

Not finding what you are looking for?
RCA 35V432T 35" TV Logo

508 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...