- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
to change wireless channel of your 2wire 2701hg youjust need to access its default gateway 192.168.1.254 type it on your address bar using internet explorer and you'll see network at a glance page. click on home networking tab at the top and look for subtab written in blue click wireless settings. you'll seewireless name and under that you'llsee wireless channel you just need to pick the channel that you want to use...
There might be a possibility have you tried manually changing the wireless channelto 9,11,or 1. by default cordless phone has channel 6. It might help if you put the base of the router or the phone away from each other.
You simply access the router's setup page by going to Internet Explorer and type http://126.96.36.199 it will prompt your for password, try admin by default. You can change the security key under the wireless tab and look for wireless security
You need to change the wireless channel on your wireless router. Using your wired computer, open the router's setup page by going to internet explorer and type http://192.168.2.1 and press enter. It will prompt you for username and password. By default the username is admin and leave the password blank. Look for wireless tab and look for wireless channel. Change it to channel 11. Make sure to take note of the Wireless Security key as well under wireless security tab. Save the settings after changing the wireless channel. On you laptop, make sure to disable any firewall then try to reconnect to the wireles network.
If you have limited access, that means you need to change the wireless channel of your router. Using
your wired computer, open the router's setup page by going to internet
explorer and type http://192.168.1.1 and press enter. It will prompt
you for username and password. By default the username is blank and the password is admin. Look for wireless tab and look for wireless
channel. Change it to channel 11. Make sure to take note of the
Wireless Security key as well under wireless security tab. Save the
settings after changing the wireless channel. On your laptop, make sure
to disable any firewall then try to reconnect to the wireless network.
Your can try changing the channel of the wireless signal by accessing your 2wire Homeportal's interface. try changing it using these recommended channels: 1,5,9 and 11. The channel is usually defaulted to 6 which most of the time conflicts with other high frequency devices.Hope this helps. If you are unsure on how to access your Homeportal's interface you just need to know the default gateway of your device. just go to start>run>type cmd>click on ok>then on the blinking cursor just type ipconfig/all and the number's beside the default gateway is the address of your 2WIRE Homeportal.Just simply open a browser afterwards and access those numbers you found on the cmd prompt. and it should show you the interface of the 2WIRE device.
Alright with linksys routers you go to the IP address in your browser usually 192.168.1.1 and then click on the wireless tab on the top. Make sure it's in manual mode then there should be a drop down with the list of channels. If you have any more questions just post them and out of curiousity why do you want to change the signal frequency?