Question about Epson RX620 All-In-One InkJet Photo Printer

1 Answer

How to reset manualy the counter on epson d68

Message says parts in printer are coming to end of service life

Posted by on

  • coachtrevoru Mar 11, 2009


    1. Open auto.bat to set the date to 19 June 2006
    2. Run adjprog.exe from the extracted folder
    Im sorry Im not sure how to find these programs.

    Trevor

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Manual instruction Resetter Printer Epson D68

  1. Switch on printer
  2. Open auto.bat to set the date to 19 June 2006
  3. Run adjprog.exe from the extracted folder
  4. Click accept
  5. Click particular adjustment mode
  6. Go to maintenance then Select waste ink pad counter then click ok
  7. Click on “check button till its done then click on initialization button then click on finish button
  8. witch off printer for 5 secs then switch on again
  9. After you reset succesfully, you can change the date back to normal.

Please rate my solution after reading. Thank you

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

The printer's ink pads are at the end of their service life. Please contact Epson support.


The printer's ink pads are at the end of their service life. Please contact Epson support.

Nov 30, 2011 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Parts inside end life


Q: What should I do if my printer driver displays the message parts inside my printer are reaching their end of service life?

A: See the Epson Ink Pad Reset Utility page.
Epson Ink Pads Reset Utility

If your product is displaying an end of life service message, please view and complete the required information below to proceed.

Please explain the message I am getting in my printer driver that says parts inside my printer are reaching their end of service life.

Like so many other products, all Epson consumer ink jet products have a finite life span due to component wear during normal use. At some point, the product will reach a condition where either satisfactory print quality cannot be maintained or components have reached the end of their usable life. This is the normal product life cycle for highly mechanical devices like printers. This message is a warning that certain parts have reached the end of their usable life and that your printer will no longer work until it is serviced.

What parts are we talking about?

The message refers to the ink pads, which are actually a number of porous pads in the printer that collect, distribute, and very importantly contain the ink that is not used on printed pages. Ink is collected by these pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. Most users will not receive this message before the printer is replaced for other reasons. Some high volume users or those who use the printer for many years may receive this message about ink pads before other components reach the end of their usable life.

Why does my printer stop functioning when I get the message?

Epson is committed to ensuring the proper operation of all our devices to minimize the risks of property damage or personal injury during the lifespan of the product. The printers are designed to stop operating at the point where further use without replacing the ink pads could create risks of property damage from ink spills or safety issues related to excess ink contacting an electrical component
.
Is there anything I can do to continue using my printer?

Epson recommends replacing the printer, but if you want to continue using it, Epson recommends having the printer serviced at an Epson Customer Care Center. You may also be able to have the ink pads replaced by an independent service provider and use the Ink Pad Reset Utility to reset the Ink Pad Counter to continue using the printer. Please note that replacement of ink pads is relatively expensive and may not be a good investment for lower cost printers because the printers' other components also may be near the end of usable life. Epson does not recommend ink pad replacement by users without technical training or resetting the Ink Pad Counter without replacing the ink pads.


Note: This utility is for Windows XP and Vista operating systems only. We hope to develop an option for Mac users as well; however, we do not have an ETA or the OS requirement at this time.
To download this utility, please complete all fields below, select the agreement check-box and click Download. Required fields are noted with an asterisk(*). Some models may require you to be redirected to another website to finalize the process.


Go to this link to complete the agreement to recieve the Epson Ink Pad Reset Utility.
http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

Trust this is helpful. :)

Dec 09, 2010 | Epson Stylus Photo 1400 Printer

1 Answer

Error Service required


Epson programmed their printer to monitor the waste ink counter andyour printer has reached the maximum value allowed, you have to resetyour printer to clear the waste ink counter.

You may read the information regarding "end of life" and "waste ink counter" here: http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

To reset the counter, download re-setter program here, install and follow the instruction in the web site.

Good luck and thank you for using FixYa.

Apr 13, 2010 | Epson Stylus Photo R300 InkJet Printer

1 Answer

ERROR MESSAGE EPSON 925


Epson programmed their printer to monitor the waste ink counter and your printer has reached the maximum value allowed, you have to reset your printer to clear the waste ink counter.

You may read the information regarding "end of life" and "waste ink counter" here: http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

To reset the counter, download re-setter program here, install and follow the instruction in the web site.

Good luck and thank you for using FixYa.

Feb 27, 2010 | Epson Stylus Photo 925 InkJet Printer

1 Answer

Epson 830u displays this message and middle button red light flashes! Do you have any ideas? John Parts inside your printer are at the end of their service life. Contact your dealer for replacement


Epson programmed their printer to monitor the waste ink counter and your printer has reached the maximum value allowed, you have to reset your printer to clear the waste ink counter.

You may read the information regarding "end of life" and "waste ink counter" here: http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

To reset the counter, download re-setter program here, install and follow the instruction in the web site.

Good luck and thank you for using FixYa.

Jan 27, 2010 | Epson Stylus 830U InkJet Photo Printer

2 Answers

Printer won't printer as message says parts are


Part are end life cycle : waste ink pad full. Need to reset waste ink counter. SSc ver 4.3 support RX 620 and 640. U can try using printer model RX 640. Menu Protection Counter, Show current value for checking. Reset protection counter. Or Try to find RX630 adjusment at indoreset,blogspot.com. Don't forget to replace or wash the pad. Or extend outlet waste ink pipe to outside.

Jun 28, 2009 | Epson RX620 All-In-One InkJet Photo...

1 Answer

Printer send s message Life of parts ending


Hi,

The "end of life" message means that the waste pads are full of waste ink.

You need to either:
  • get the printer serviced at an Epson service center

    OR

  • install an external waste ink counter and reset the waste ink/protection counter.

All the information you need to install an external waste ink tank is available from here:
http://www.continuousink.info/forum/viewtopic.php?t=4096

Resetting the waste ink counter is easily done using the IPR utility which you can read more about and find downloads for, from here:
http://www.wasteink.co.uk/epson-ipr-reset/

Hope that helps..

Martin

May 19, 2009 | Epson Stylus R340 InkJet Photo Printer

4 Answers

Parts inside your printer are near the end of their service life.


i have a problem with my printer epson stylus C90. may i know what to do when parts of my printer are near the end of their life service.? how can i fix it?

Dec 07, 2008 | Epson Stylus Photo R300 InkJet Printer

2 Answers

Epsom printer d68


The message means the waste ink pads are full and the internal counter in the printer needs to be reset.

you can take the machine to an Epson Express center who should be able to reset the counter in about 30 seconds. Changing the pads is a bigger job, but if this is the first time the machine has been reset you can probably skip the pad change and just go for the reset.

You could make a modification to the printer to use an external waste tank instead of the pads. Then whenever it reaches the limit again, you can just reset it.

Please rate this post as fixya.

Jul 16, 2008 | Epson Stylus C66 Photo InkJet Printer

1 Answer

EPSON PRINTER R22O


Hi-

yes actually there is. the parts its talking about is the inkpad, you can send this over to an epson certifies servicer in your are to have inkpad change and they will reset the counters for it. go this link and look for a servicer near your place
http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp?BV_UseBVCookie=yes

or you can contact epson at 562-276-1300

pls rate as fixya if helpful. thanks!!

Jun 21, 2008 | Epson Stylus 2200 InkJet Photo Printer

Not finding what you are looking for?
Epson RX620 All-In-One InkJet Photo Printer Logo

2,806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...