Sometimes when using keyboard to type messages touch pro switches off and resets other times when I close the keyboard up the phone resets. gets very frustrating

you cant

The Touch Pro 2 has a non-Microsoft Bluetooth v2.1 stack and does mess about with some car kits, especially the built-in factory bluetooth. My car will connect but will not patch the sound through from the phone to the car! It's a pain...

replace it

Take the battery out of the TP and then press down very hard on the spacebar. This will reconnect the flex cable and will fix it for the time being. But in the end a replacement will be needed.

try soft reset after unchecked msg delivery notification.

try use the keyboard (and also make sure that typed button show correct symbol). If everything is in order, then somebody must changed your code.

Well u can start with reseting the phone from the little red button next to the charger piece. If that doesnt work, go to your company store and they should give you a brandnew one and transfer all you contact, cal ecents, ect. They can transfer everything except ur txts and emails. I hope it all workds out.

Did you modified your phone? If so ask the ROM maker for help. If it has generic ROM then reflash the ROM. You can try hard reset as well.

Try this and see if this works for you. Touch Keypad simulates a wireless phone keypad on the touch screen to allow you to enter text, numbers, and symbols just as if you were using a wireless phone keypad. Touch Keyboard simulates a 20-key QWERTY (typewriter) keyboard on the touch screen to allow you to enter text, numbers, and symbols similar to the way you would using a QWERTY keyboard. To use Touch Keypad or Touch Keyboard:  In a program, tap the Input Selector arrow, and then tap Touch Keypad or Touch Keyboard. To type lowercase letters, tap the keys on the dial pad or keyboard. To type a single uppercase letter, tap the Shift key and then tap the corresponding key. To type all uppercase letters, tap the Shift key twice. To change back to all lowercase letters, tap again. To enter a space after the word, tap the Space key. To start a new line, tap the Enter key. To backspace and delete a single character in any input mode, press the Back key. To open the Symbol pad, tap the Symbol key. To change the input mode:  Tap the Input mode key to switch to a different input mode: XT9 (predictive), Multitap (abc), or Numeric (123).
Let me know if this works for you, if not let me know.
JimmyC

i had the same problem. if you take it in to the store you can get it reset to factory settings. it helps if you have insurance.