Question about Intel Express 9535 Router

1 Answer

Intel 9535 router

Dear sir:
I have a Intel 9535 router, But I don't know how to management it via console port, please kindly let me know how to setup it. Thanks a lot.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,785 Answers

Connect the console port of the router to serial port of pc then open hyperterminal from all programs, then give a name to the connection and load the default.
then press enter if you can get message from router then post back for more tips

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to configure cisco aironet 1131 and how to find the getaway for this router ?


Have you read the quick start and installation guides?
http://www.cisco.com/en/US/products/ps6087/prod_installation_guides_list.html
Yes, the AP should be able to obtain an IP address via DHCP from your
Netopia router.
If this device is used, it may not be setup to aquire things via DHCP,
and you'll probably have to hookup over a console port and do password
recovery.
Cisco's aren't the easiest things to setup, they are more akin to a
box of tools, rather than a single purpose built item, and thus can
do quitealot, but you have to learn how to use the tool first. It will
then let you setup things quite advanced that the single-purpose built
item never imagined, but you have to know how to get there first, not
coast and do the advanced stuff later.

Dec 29, 2013 | Cisco Air-Ap1131G-A-K9 - Aironet 1131G...

2 Answers

How do i hook up my linksys wireless-g broadband router wrt54g-someone disconnected it


Disconnect the power to each unit (except computer, shut it down). After you connect the modem,router and computer, power up the modem,then the router,then the computer.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Hook it up per this diagram:

joed911_1.png

May 20, 2011 | Computers & Internet

2 Answers

I need to open port 1000 in my router, i dont know how to do it. please help me.


Use the on line guide from this link. It's very easy to configure it.
In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

May 14, 2011 | Linksys WRT120N Router

2 Answers

Need to reset, but don't know ID or password, no idea how to get into it. We got it from Verizon when they hooked up our 2xT1, but they refuse to manage the router. HELP!


That model isn't familiar to me, but try default login ID "admin" and Password "setup". If that doesn't work, the following procedure might allow you to log on and delete the config. That will delete everything, though, so make sure you read out all the configuration info before you reset.
  1. Connect the Console cable to the Console port on the Secure Router
  2. Connect the other end of the DB-9 Console cable to the COM-1 port on the workstation
  3. Start the Hyper terminal (VT-100 or equivalent) application on PC-1
  4. Configure the COM1 port for 9600 bps, 8 data bits, 1 stop bit, no parity, and XON/XOFF
  5. Login SR with the factory default login ID "admin" and Password "setup"
You can also reset those routers by deleting the config file like this:
  1. Login as above
  2. type "SR > clear cfg_file system.cfg"
  3. message will read "removing contents of '/flash1/system.cfg' ...done.
  4. now type SR > reboot

Jan 13, 2011 | Nortel Networks SR1004 4P ACTIVE T1 ...

2 Answers

I, i am now connected to the internet with my wireless router (Belkin f7d1401 v1) but only via cable i can not via wireless. i have also digited 192.168.2.1 but now i dont know going further


You must login to the router and setup the wireless. Make sure you turn the WIFI broadcast on (enable it) so you can actually have wifi signal.

Dec 12, 2010 | Belkin Basic Wireless Router

1 Answer

Connect D-Link DWL-G700AP to dreambox decoder


you can connect to your box via FTP via a crossover cable. If you can’t, you might want to read up on that before attempting this.
Now, what we’ll need is…
Ethernet cable (crossover or patch)
Router
Modem
We’ll also assume that you have a router (wireless or not) and that your modem is connected to the ‘Internet’ or ‘WAN’ port.
If you have a free port on your wireless router, you can connect your dreambox to this. Use the ethernet cable (crossover or patch, most modern routers will accept either) connect one end to your dreambox and one end to a free port on your router. You don’t need to change any settings on your router or PC.
Over to the dreambox. Navigate to the networking page on your dreambox.
Setup -> Expert Setup -> Communication Setup

Dec 09, 2009 | D-Link DWL-G700AP (S2984376) 802.11g/b...

1 Answer

Need instructions for reconfiguring old system. Ethernet cable to: Modem, to Netgear Router, to original computer (still on line), and to new desktop; via Netgear WG-111 link to a third laptop (online for...


modem to router to wireless router if you want (plug the wireless from a regular port to a regular port in first router, do not use the uplink port. from either router - run to any computer you want.

Get Network Magic to help you setup and manage your network.

Free to download and evaluate period ... read details while there ... It is a great manager program

a

Oct 20, 2009 | NetGear WGR614 Wireless Router

1 Answer

I want to setup a wireless network with 3 deskops and atleast 2 laptot


Linksys has a slim Web server built into their routers and a nice little Web based configuration management interface. You can configure your router to pass or filter IP multicast. Most of the Linksys routers have a filter configuration page where you simply check to filter/pass multicast traffic. As for the VoIP/Teleplhony trafic, you should select one of the routers that allows Quality of Service (QoS) - only some routers support this. The QoS router may recognize the voice traffic automatically but at most you would have to specify the applicaation/ports to give priority to. Again, all is done easily via the Web based management utiility - no CLI needed.

Roger

Aug 04, 2008 | Computers & Internet

1 Answer

Trying to use port forwarding


hi!
i tried to remote access your modem using the serial nos. but it didn't give me anything, pls try to run system setup wizard from your computer by accessing gateway.2wire.net or homeportal/setup, once you have configured the modem with your own settings, please let me know and i'll try to open some ports for you

Mar 23, 2008 | 2wire HomePortal 1100 Router...

3 Answers

OOBM what does it stands for?


Out-of-band Management. This refers to using a network or other management connection to the router that is not part of the normal data flow in and out of the router. For example, if you connect a dial-in modem to the router's console port and manage it through a phone line...this is considered out-of-band-management because you're not using normal communications bandwidth.

Jan 17, 2008 | Cisco Universal Access Server AS2511-RJ...

Not finding what you are looking for?
Intel Express 9535 Router Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

David
David

Level 3 Expert

778 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...