Question about Epson Printers & Copiers

1 Answer

Can not get the ink tray to stay so i can change the ink tx 100

I would like to put new ink in but can not get ink holder to came and stay still free service

Posted by on

  • ambience Mar 05, 2009

    still not working please help

  • ambience Mar 05, 2009

    my printer is a tx 100 please help

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

Press the Ink Button on the printer and lift the lid. The ink carriage should move to the pointer to indicate the first cartridge that has gone. Press the button again, and it should move again to the next cartridge. When it has gone through all the empty units, it will move to a clear part of the printer and stay there until you replace the cartridge(s). Press the button again and it should move back and charge the heads with ink.

Posted on Mar 05, 2009

  • Jay Selway
    Jay Selway Mar 05, 2009

    What is the printer model

  • Jay Selway
    Jay Selway Mar 05, 2009

    OK, it is how I said, however turn the printer on, lift the scanner unit up so it sits on it's leg, then follow my previous instructions, but press the stop button instead of the ink button.



    Don;t hold the stop button down, as it will start a head clean!.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change ink cartridge


tell it your changing cartridge

Jul 08, 2015 | Printers & Copiers

1 Answer

I dont have any coloured ink cartidges left and need to immediately print some forms in full black will be okay but i cannot change my colours to black as the ink holder stays on the far right of my epson...


To print in all black, you can change a setting through the computer to tell the printer to only use the black ink. This is better than putting black ink where the color ink normally would go as that would cause the shading to be wrong and potentially ruin the documents.
If you have enough black ink in the printer, before you finalize the printing process make sure you have black and white only selected.
This will allow you to print without getting access to the ink cartridge holders.
Good luck hope this helps.

Mar 11, 2011 | Epson PRINTER, 4800 PORTRAIT EDITION...

1 Answer

Need to know how to change printer ink


Do not touch the electrical contacts or print head nozzles on the Cartridge. The machine may not print properly if you touch it.
genebur2_3.jpg
1. Make sure that the power is turned on, and open the Paper Output Tray.
2. Lift the Scanning Unit (Cover), then hold it open with the Scanning Unit Support (C).
genebur2_1.jpg 3. Pinch the tabs and open the Ink Cartridge Locking Cover.
4. Remove the Cartridge.
genebur2_2.jpg 5. Take a new Cartridge out of its package and remove the orange protective tape gently
6. Put a new Cartridge in the Cartridge Holder.(The Color Cartridge should be installed into the left slot and the Black Cartridge should be into the right slot.)
7. Close the Ink Cartridge Locking Cover to lock the Cartridge into place.
8. Push down the Ink Cartridge Locking Cover until it clicks.

Nov 08, 2010 | Canon PIXMA MP240 All-In-One InkJet...

1 Answer

The ink cartriges wont fit into the printer.


This printer uses PG-30 and Cl-31 ink tanks. You can also use PG-40 and CL41. Open paper output tray. Turn on the machine and lift up the scanning unit or printer cover. Pull unit support down into place and the ink holder will move to the left. Gently remove cartridges and install new ones. Let me know of outcome.

Jun 08, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

The ink tank doesn't go to the middle


After you opened the front panel, did you lift the scanner section? The scanner section has a switch on it that activates the ink tank holders to come out to the middle so they can be changed. It is not the greatest design and it doesn't stay up by itself. I normally use an old cartridge to prop up the scanner section while I change cartridges. Hope this helps!

Apr 01, 2009 | Canon MultiPASS MP370 All-In-One InkJet...

2 Answers

Change ink cartridge on epson stylus SX200 -printing head moves from side to side but then parks to the R and I cannot get access to change the cartridges.........


The ink cartridges are all separate so you press the cancel button (with no jobs pending) to bring the cartridge holder in to the right place open the holder remove the cartridge and then replace it, let the printer purge the cartridge then your good to go

Mar 24, 2009 | Epson Stylus Photo R320 InkJet Printer

1 Answer

Can't Print Envelopes, No Ink being used


Set tray 1 for the correct size envelopes in printer properties.

Feb 21, 2009 | HP LaserJet P2015dn Printer

1 Answer

Change printer ink


Turn on the printer.
lower th epirnter's output tray, pull out the extension, and open the cover.
press and release the ink button.
if your ink lights is on or flashing, the printer head moves to the left, and the cartridge that need to be replaced stops under the ink out mark.
open the cartridge cover
Pinch the back tab of the empty cartridge as your left it out of the printer.
shake the ink cartridge 4 to 5 times while it is still in the package.
unwarp the new ink cartridge and lower it into the holder. Push down gently until the cartridge is firmly seated.
repeal the procedure if more than one ink cartridge is out.
close the cartridge cover.
close the printer cover and press the ink button.
The green power light flashes and the printer makes noise. charge takes about a minutes. When it's finished, the green power light stops flashing and stay on, and the red ink light should go out.

Oct 10, 2008 | Epson Stylus C66 Photo InkJet Printer

1 Answer

Ink cartridge changed but computer will not recognize it has ink


Please try the following in an attempt to resolve this issue:

1. Make sure the unit is turned on, and not printing. The POWER light should be on, but not flashing.

2. Lower the OUTPUT tray, and lift the scanner portion to access the ink cartridges.

3. Press and release the INK button.

4. Open the CARTRIDGE COVER. Pinch the front and back tabs of the first cartridge, and remove it from the printer.

5. Place it back into the holder. Push it down gently into the holder, until the cartridge clicks into place.

6. Repeat steps 4-5 for each cartridge. Close the CARTRIDGE COVER once all of the necessary ink cartridges are re-seated.

7. Carefully lower the scanner, until it clicks into place

8. Press and release the INK button.

The ON light flashes and the printer makes noise. Charging takes about 30 seconds. When it's finished, the ON light stops flashing and stays on steady.

CAUTION: Never turn off the printer while the ON light is flashing, unless the printer hasn't moved or made noise for more than 5 minutes.

Aug 30, 2008 | Epson Stylus CX4200 All-In-One InkJet...

2 Answers

Changing the ink cartridge in Epson Stylus CX4200


1. Make sure the unit is turned on, and not printing. The POWER light should be on, but not flashing.

2. Lower the OUTPUT tray, and lift the scanner portion to access the ink cartridges.

3. Press and release the INK button. The print heads will move to the left, and the cartridge that needs to be replaced will stop directly beneath the OUT OF INK symbol. Make a note of which cartridge requires replacement.

4. Press and release the INK button again. If more than one ink cartridge is empty, the next cartridge will move under the OUT OF INK symbol. If no other cartridges are out of ink, the print heads will now move to the REPLACEMENT POSITION.

5. Open the CARTRIDGE COVER. Pinch the front and back tabs of the empty cartridge as you lift it out of the unit. Dispose of this cartridge.

6. Before you remove the new cartridge from its package, shake it four or five times.

7. Remove the new cartridge from its package, and lower it into the cartridge holder. Push down gently until the cartridge clicks into place.

8. Repeat steps 5-7 for each cartridge that you need to replace. Close the CARTRIDGE COVER once all of the necessary ink cartridges are replaced.

9. Carefully lower the scanner, until it clicks into place

10. Press and release the INK button.

The ON light flashes and the printer makes noise. Charging takes about 30 seconds. When it's finished, the ON light stops flashing and stays on steady.
Caution: Never turn off the EPSON Stylus printer while the ON light is flashing, unless the Stylus printer hasn't moved or made noise for more than 5 minutes.

May 15, 2008 | Epson Stylus CX4200 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...