Question about Palm Treo 700wx Smartphone

7 Answers

Pioneer AVIC-F900BT bluetooth connection problem.

I have a Pioneer AVIC-F900BT installed in my car and a Palm Treo 700wx cell phone with Windows Mobile ver. 5.0.

I cannot get the contacts from my phone to load into the Pioneer unit. I also can't use the dialing, answer, hang up, etc. functions directly from the Pioneer unit either.

Any help would be greatly appreciated.

Thank you.

Posted by on

  • 5 more comments 
  • chedberg Mar 05, 2009

    I connected the phone wirelessly with Bluetooth.



    I can dial from my phone and it comes through the speakers and the person can hear me through the installed microphone.

  • chedberg Mar 05, 2009

    I am able to talk and hear a phone call but I have to dial it or answer it directly from my phone.

  • chedberg Mar 05, 2009

    Is there something with the COM ports on my phone I should be setting?



    Thank you.

  • chedberg Mar 05, 2009

    Is there something with the COM ports on my phone I should be setting?

    Thank you.

  • chedberg Mar 05, 2009

    It finds the phone OK.

  • chedberg Mar 05, 2009

    I have just deleted and reconnected the phone to no avail.

  • chedberg Mar 05, 2009

    I have the latest firmware installed.

×

7 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Please try to reset the car unit :and then try connecting ....


Follow the steps below to reset the AVIC-F900BT.

1) Press and hold down the system RESET button (which is located just to the left of the "EJECT" button) for five (5) seconds and release it. Next, determine which of the following applies:

2) If the system boots ups and displays the main menu, you unit is fine.

3) If the system shows the "Pioneer splash screen" BUT does not proceed to the main menu, press and hold down the RESET button for ten (10) seconds and then release it. The system should reboot automatically and display the main menu.

4) If the system does not display the main menu AND the screen is blacked out, press and hold the RESET button and the EJECT button at the same time for ten (10) seconds and then release them. The system should reboot automatically and display the main menu.

Posted on Mar 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 277 Answers

Get the device checked at the nearest service center with there pionerr device as it will get detected there because checking at the service center will be absolutely free. as it suggests that the two device are not matching up the settings .and you have tried all the necessary options to be tried.you are doing evrything very perfect.its the compitability issue to be checked at the service center.
confirm it beforre trying more as if the devices are not compitable nothing will happen.

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 583 Answers

Download the updated latest firmware from link below: http://www.pioneerelectronics.com/PUSA/
and also check the link below for extra guidance on how to: http://www.pioneerelectronics.com/PUSA/Support/Navigation/Notice+of+Free+Firmware+Update+for+AVIC+F-Series
thanks. rate the solution if it helps

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Palm Master
  • 1,800 Answers

Sounds like it finds the stereo, but won't pair? You need to check with Treo. I know that my Treo 700WX did not pair with my stereo headsets until I downloaded a patch upgrade to the phone.

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Palm Master
  • 19,396 Answers

Try removing all pairings from both the units and then re establishing bluetooth pairings again.

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Hi there,

better do resetting of both unit. power off and turn it on again. you must do a complete pairing of the device.

Posted on Mar 05, 2009

  • 1 more comment 
  • micromaster
    micromaster Mar 05, 2009

    download the latest firmware

  • micromaster
    micromaster Mar 05, 2009

    also see HERE

  • micromaster
    micromaster Mar 05, 2009

    it should be on the bluetooth setting, a wireless connectivity between your device.

    see on this article to determine if you have the latest firmware update installed.




×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 165 Answers

Did you connected the device proper ly and through which wires did you connected. reply.

Posted on Mar 05, 2009

  • mradviser Mar 05, 2009

    you will need to reset all the settings again as something is really getting missing as both are compitable with each other and should work.but something is missing just reset all the settings again from step 1 *** you did before it will work.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I send pictures?


HI, you cannot send pictures through text message but through multimedia messages..but before you can do this you need to activate your multimedia messages through your network provider and after activating it, you can only send multimedia messages to people that have also activated there own.
cheers

May 31, 2010 | Palm Treo 700wx Smartphone

1 Answer

My palm treo is working perfectly fine apart from


change the screen....it ll costs u around 2000 bugs!!

Sep 30, 2009 | Palm Treo 700wx Smartphone

1 Answer

My palm Treo wx will not sync with my computor. I have troulbe with it shutting off my plantronics T150 bluetooth.It continually needs to be rebooted. I have had this phone for 18 months. I have had...


the problems your experiencing are problems that every cell phone has...be patient and make sure your battery is charged well. after 18 months, I would just replace the battery. after time the batteries just lose full strength power.
your phone is like a mini computer and takes a good battery to run.
Replace the battery with a new OEM battery, charge it real good and see if your problems go away.

Jun 07, 2009 | Palm Treo 700wx Smartphone

1 Answer

My palm treo 700 wx won't sync


Try uninstalling the Microsoft Activesync. The Palm website offers the newly, innovated Activesync software available for your device. I would recommend reinstalling Microsoft Activesync from this support site.

Mar 27, 2009 | Palm Treo 700wx Smartphone

1 Answer

I want the driver for mi palm treo 700wx


You should be able to find what you need at www.palm.com/nz/support/treo700wx/ including software, setup guides etc.

Mar 27, 2009 | Palm Treo 700wx Smartphone

1 Answer

I HAVE PALM 700WX VERIZON, UPGRADED TO WIN MOBILE 6 AND NOW WILL NOT PAIR WITH BLUETOOTH IN MY BMW Z4. PALM SAYS ITS NOT THEIR PROB, BMW SAYS 700WX IS NOT ON THEIR LIST, VERIZON SAYS ITS A WINDOWS PROB AND...


delete the association that is currently in your z4 and completely reinstall the pair. if you have z4 manual it will show how to do it.
Here is an excellent video on youtube on how it's done.
http://www.youtube.com/watch?v=8blfYhM0CpU

Mar 16, 2009 | Palm Treo 700wx Smartphone

1 Answer

Want to do a master reset to clear all info before I sell it on a palm Treo 700wx


to do a MAster/hard reset you hold down the END/RED key and/while pushing the reset button with your stylus on the back of the phone, the reset button is under the battery cover, right next to the battery

Mar 13, 2009 | Palm Treo 700wx Smartphone

1 Answer

Palm Treo


I had to purchase a new cellphone.

Jan 17, 2009 | Palm Treo 700wx Smartphone

2 Answers

Palm treo 700wx smartphone


in china made double sim cards cell phone- aircall only one sim is working. give repair procedure

Mar 09, 2008 | Cell Phones

Not finding what you are looking for?
Palm Treo 700wx Smartphone Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Palm Cell Phones Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Are you a Palm Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...