Question about Back To Basics Toys R/C Helicopter (27 MHz)

1 Answer

New 27 MHZ Helicopter Controller won't turn on

I just purchased a brand new Hawk R/C Helicopter with 27MHZ remote controller.  The Remote controller won't power on - has 8 brand new AA batteries.
I noticed there is a rubber panel on the front that comes off and exposes three fuse like things - could this be related?
Any other suggestions?

Posted by on

  • Anonymous Mar 29, 2014

    The sky king was never made with a 49mhz pcb .I bought it brand new.Im just looking for a qick fix instaed of changing out the pcb. It will cost too much to ship back to china. thank you.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 27Mhz helicoper (looks identical to the one on the picture). I tried to fly it for the first time, but I am having problems controlling it. The left radio control lever sends the helicopter upwards, but the right hand control doesn't seem to do anything and that should make it go backwards and forwards. Can anyone help me as well please?

Posted on Feb 22, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Skygiant rchelicopter when i sync it and then give it throttle all the lights on the helicopter syart flashing red and it dosent do anything

I bought 2 off brand ,of the same remote controlled Helicopters which cost about $30.00 each. The controller has A_B_C setting helicopter has none, You can set them up any way, either all on one or separate channels per controller which is channel A.
1st turn off Helicopter switch to off and controller off .
Set controller -1 to channel C , , then (controller-1 ) throttle knob to max, turn power on to controller -1 , throttle down and up 3 cycles and left and right 3 cycles
Turn on Helicopter 1 with controller -1 still on, it should work on channel C

Jun 11, 2014 | Team International Hawk Talon V3 RC Indoor...

1 Answer

Asahi techniplus radio control 27 mhz

27Mhz is a term that describes a broad range of frequencies. 27.1Mhz narrows it down somewhat, 27.14Mhz narrows it down further still and 27.145Mhz is fairly specific for a radio. Many times, these devices support multiple frequencies with a selector switch capable of choosing a frequency that is not already in use. You MUST select the same frequency on BOTH the controller AND the helicopter to communicate properly. Review your instructions or contact the manufacturer if you need more help.

Dec 31, 2017 | Radio Communications

1 Answer

How do I change S022 frequency

They come set to a frequency the sticker on the helicopter and hand remote must correspond eg 27mHz both have to be same so if you wanted to change it you would need a new PCB circuit board and hand controller on the same frequency.

Kind regards, Julian

Mar 13, 2013 | SYMA Toys industrial Syma S022 Big Chinook...

1 Answer

Just got a s301g Helicopter and it won't start up

Check the wiring where you plug in the charger to the helicopter. There is a red wire with quick disconnects. If its loose (the quick disconnect) you get this problem. In my case the helicopter came out of the box with this completely disconnected. It was hard to connect because there wasn't enough slack wire but once we did it the white light on the front of the helicopter came on and we were flying.

Nov 19, 2012 | Syma S301g Rc Helicopter 18" 3 Channel Rtf...

1 Answer

How to synchronize a Hawk talon V3 radio control helicopter with the remote control

If it has 3 channles then you turn the helicopter on first, then turn the remote on. If its not a 3 channle helicopter i dont know sorry.

Jan 04, 2011 | Team International Hawk Talon V3 RC Indoor...

5 Answers

The helicopter will not synchronize and I can't get it to communicate with the remote.

Press the throttle up and and back down and hold down a few times, sometimes it help to move left right knobs also. Try on each channel to get it synced

Dec 25, 2010 | Team International Hawk Talon V3 RC Indoor...

1 Answer

Lost remote to the HUMMER H2 - will any 27mhz controller work , or does it have to be from FASTLANE?

Any 27 mhz controller would work in ur TOY! Just check the exact frequency of the CRYSTAL in the board of the truck and the controller, they must be almost the same frequency or adjust the tuning in either truck or the controller!

Nov 09, 2010 | Fast Lane 116 Scale Radio Control Truck...

2 Answers

Hi ihave brought helicopter ftw 730 but the remote control was not its own .the helicopter ftw 730 remote control frequency is 40 mhz but the one i have is 27 mhz so how can i make as 40 mhz remote...

Unfortunately you can't. You will need to change the receiver or the transmitter so they are both the same frequency range eg 40mhz or 27mhz. Then you will need to check the crystal is the same frequency for the Transmitter and receiver eg 40.25mhz. NB. you can't put a 27mhz crystal into a 40mhz set or vise versa it won't work.

Aug 21, 2009 | RC Remote Control Rc Mini Helicopter

1 Answer

27 mhz rc helicopter will not operate. The helicopter motor runs fine when powered directly, but will not start using the radio control panel.

WE have bought the Black Hawk Heli with 27Mhz radio system to sell. The Heli's fly great and the Gyro makes them even stable. However when they feel like it, the motor starts running on its own and we had them all returned by clients. What a ******* these were. anyone may know how to rectify this radio problem. I know that 27Mhz frequency is very critical to interference, but this is upsurd.
Anyone with knowledge please give us a solution.
Regards to all. George

Jul 08, 2009 | Air Hogs Aero Ace

1 Answer

My AH-64 is out

No you can't change it you must get the right transmitter.

Jun 11, 2009 | SYMA Toys industrial SYMA S009 Micro...

Not finding what you are looking for?
Back To Basics Toys R/C Helicopter (27 MHz) Logo

Related Topics:

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Back To Basics Toys Toys Experts


Level 3 Expert

79865 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

20369 Answers

ray gallant

Level 3 Expert

51513 Answers

Are you a Back To Basics Toys Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides