Does hp desktop have wireless connection - Dell Inspiron 5100 Wireless Mini-pci Network Card Card - P0906

The HP Pavilion P6733w did not come with a wireless network adapter originally. It does have a wired 10/100 network LAN port. You could add a wireless network card to one of the PCIe slots. (There are 3 PCIe x1 slots and one PCIe x16 slot. Depending on the upgrades, you may have other cards in the system box.) See https://support.hp.com/us-en/document/c02628426 for the original specifications.

I hope this helps.

Cindy Wells

Which operating system ???...
There are a variety of ways to connect to the Internet or a home/business network using your Hewlett-Packard (HP) desktop computer---via a modem, Ethernet cable and even wirelessly.
A wireless connection works by sending a signal from your modem or router to your HP desktop's built-in wireless radio.
The radio receives and processes the signal so you can access the Internet or a home or business network.
In order for the signal to be received by your HP desktop, you must enable the wireless radio within the computer's configuration.

Click "Start," "Control Panel."
Double-click on the "HP Wireless Assistant" icon.
The HP Wireless Assistant dialog box will open.
Click the "Turn On" button next to the words "Wireless LAN."
Click "Close" to activate the wireless radio.
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00045315&product=12455 - DeviceEnabled
Using Bluetooth Devices (Windows XP)

http://h20239.www2.hp.com/techcenter/wireless/wireless_TS.htm
Wireless networking center

When youclick Refresh network list, then Choose yourwireless network and then click Connect to your secured WirelessNetwork, it will asks for a Network Key before allowing you to connectinto your wireless network. This Network Key is either the WEP, orWPA or WPA2 Encryption key that is used to configure the Wireless Router. The Passphraseis an alternate way to setup the Encryption key.
When you are requested for a Network Key, you can just enter the Passphrasethat was used to configure the Encryption key in the wireless router.http://www.fixya.com/support/r5270415-network_password_network_addressFor information on securing your wireless network,configuring the wireless router and configuring the wireless card in thelaptop/computer, please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

yes, you can definitly connect your desktop computer to the network wirelessly. you just need to have a wireless adaptor and i prefer you to have a 2wire brand adaptor for its much easier to download a driver on it so you can able to use it wuicly and browse using your desktop computer that wil be connected wirelessly.

it does not have wireless adapter, you can confirm the specs here
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00260857
although you can install an USB wireless adapter.
hope it helps, if so do rate the solution

Use the disk that came with the printer and install the software in both the computers based on the os installed in the individual computers, ping the ip address of the printer from both the computers, and then test for the functionality

Is your cable modem also a wireless router?

From my search on it, it is not a wireless router.

This means you need to attach a hub or a wireless router to your cable modem so that more than one computer can connect to the internet simultaneously.

Go out and buy a wireless router. Connect the wireless router to your cable modem.

Connect your desktop to the wireless router with an ethernet cable.

Then you should have internet on your desktop.

Let me know if this helps. Give me a good rating and vote for me please.

The wireless card didn't get a IP address from the router when it booted up.
Right click on the wireless icon and then click on Repair.
This will force the wireless card to get a new IP address from the wireless router.

Hi jjank740;

First off, did you try to recycle your printer? Turn it off and back on again. Sometimes power outages can disconnect that printer. If that doesn't work. Go to the printer and access the system network configuration on the led panel. Type in the WEP number and password again, and let it search for the connection. That should do it. Once it's connected you'll see the blue wireless indicator turn on.

Good Luck

Mark


Please don't forget to leave a rating.

We cannot connect the pro l7680 printer wirelessly. Connect the printer to the router via ethernet cable and connect the desktop to the router wirelessly.