Question about Uniden Cordless Phone

1 Answer

My handset displays "New Voice Mail" and the base displays 00.

Handset displays "New Voice Mail" and the VMWI flashes continuously and the Base shows 00 and says "You have no messages". How do I correct this condition?
The base "charge/in use indicator" flashes continuously. The battery was charged about 18 hours before use.

Posted by on

  • 2 more comments 
  • Anonymous Mar 07, 2009

    I have the exact same problem.

  • elizwolak Mar 08, 2009

    Handset displays "New Voice Mail" and the base displays 00". When pushing PLAY button, it says I have no messages, but I left one to myself from my cell phone.

  • scibosharon Mar 21, 2009

    I have the same problem as the others.

  • Carol Bryant
    Carol Bryant Mar 02, 2015

    I have same problem. Light for new message flashes, but there is not message. Any solutions?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is the problem, thebase charge light flashes continuously,It says that I have a new voise mail and the the base says (00)

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a Uniden N32 Model XDECT7055. How do I remove the red flashing light on top of all the phones.


If that is the Voice Mail Waiting indicator light at the top of the handset and on the base, you need to press Menu on the base. Use the up/down arrows to select VMWI Reset. Press Menu again to select this sub-menu. Use the arrows to highlight Yes and press Menu again. You may need to contact your telephone company to make sure that the voice mail service is still compatible with the Frequency-Shift Keying message notification. Some broadband (particularly DSL) systems can cause telephone interference. Check with the broadband provider if you need a DSL filter (or similar item) to keep the interference from corrupting the VMWI information.

The procedure is on page 17 (19 of the PDF) of the manual for the Uniden XDECT7055. This is available here: https://www.uniden.com.au/resources_main/pdfs/XDECT_7055_3WP_OM.pdf .

I hope this helps.

Cindy Wells

Jul 23, 2016 | Uniden Cordless Phone

1 Answer

The phone says no phone line, and i dont have a dial tone. cant call out and cant get calls coming in


Model LS6305: How to register a handset:
  1. Place the non-registered handset in the telephone base or charger. If 1.Press FIND HS on base 4sec and 2.Then press # on handset do not appear alternately on the handset screen after a few seconds, remove the handset and place it in the telephone base or charger again.
  2. On the telephone base, press and hold FIND HANDSET for about four seconds until the red IN USE light on the telephone base turns on.
  3. Remove the handset from the telephone base or charger and then press # (pound key). It displays Registering...Please wait. It takes about 60 seconds to complete the registration. The handset displays Handset X Registered and you hear a beep when the registration process completes.
  • If the registration fails, the handset displays Registration failed for a few seconds, then 1.Press FIND HS on base 4sec and 2.Then press # on handset alternately. To reset the handset, remove it from the telephone base or charger and place it back in. Try the registration process again.
Model ip8300: How to register a handset:
  1. Press and hold FIND HANDSET for at least 10 seconds on the telephone base. The VMWI and LINE IN USE lights will blink alternately indicating that the telephone base is in registration mode.
  2. To display the telephone feature menu, press the Menu softkey from the main idle screen.
  3. Press the up, down, left and/or right NavKeys to choose Registration Settings then press the Select softkey or center NavKey/SEL.
  4. Press the up or down NavKey to choose Handset Settings then press the Select softkey or center NavKey/SEL.
  5. Press the up or down NavKey to choose Register to Base then press the Select softkey or center NavKey/SEL. A list of locations for assigning telephone bases will be displayed.
  6. Press the up or down NavKey to choose an empty location and press the Register softkey or center NavKey/SEL.
  7. The handset will display Searching while it searches for the telephone base. If the search is successful, a code from the telephone base will be displayed. To register the handset to the telephone base, press the Register softkey.
  8. In the Enter PIN box, enter the system PIN. The default PIN is 0000. Press the Apply softkey.
  9. Handset registered will be displayed when the registration process is complete. The screen will return to the registration settings menu. Press OFF to return to the idle screen.
Model ip8301: How to register a handset:
  • Before registering the handset with the base station, press the FIND HANDSET button in the base till the VMWI and LINE IN USE lights blink alternatively. When the lights start blinking, register the handset. The default PIN for registering the handset with the base station is 0000.
  1. Press Softkey Menu from Home screen
  2. Choose the Settings icon from Menu screen and press center Navigation key/SEL to display the settings menu options.
  3. Press the up or down Navigation Key to choose the Registration Settings menu option and press the center Navigation key/SEL to select.
  4. Press the up or down Navigation Key to choose the Handset Settings and press the softkey Select to select.
  5. Press the up or down Navigation Key to choose the Register to Base and press the softkey Select to display a list of available base stations. Choose a base station from the list and press the softkey Select to select.
  6. The handset will search for the Base within its range. During this time, the searching screen will be displayed.
  7. If the search is successful, the Base station number of the base will be displayed.
  8. Press softkey Register. Enter the PIN and press softkey Apply to save and subscribe to the base station.
  9. To cancel the entire operation, press OFF key anytime.

Mar 07, 2011 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

System error #1 Panasonic kxtg2770


spacer.gif spacer.gif
1)On handset, press MENU, 0, 0, 1.
Handset display shows as follows.

ts_hsinset_locator.gif

*Skip this step when handset already shows as above.

2) On base unit, press LOCATOR for 3 sec until CHARGE LED flashes.

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Panasonic Services Company Customer Servicenter
Suite B 4900 George McVay Drive
McAllen, TX 7850


spacer.gif
spacer.gif
1)On handset, press MENU, 0, 0, 1.
Handset display shows as follows.

ts_hsinset_locator.gif

*Skip this step when handset already shows as above.

2) On base unit, press LOCATOR for 3 sec until CHARGE LED flashes.

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Panasonic Services Company Customer Servicenter
Suite B 4900 George McVay Drive
McAllen, TX 7850


spacer.gif
spacer.gif
1) Press FUNCTION on handset. Then, using the Navigator key, press Down (V) 4 times, Right (>) 1 time, Down (V) 7 times, Right (>) 2 times.
Handset display shows as follows.

ts_hsinset_mute.gif

*Skip this step when handset already shows as above.

2) On base unit, press MUTE. (MUTE LED flashes.)

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Dec 04, 2010 | Panasonic KX-TG2770 Phone System w/...

1 Answer

I have a Motorola L404 cordless phone. i bought an additional handset. I cannot get it to register with the base unit. It just keeps saying "registration failed"


On the Motorola L404 series, to deregister all handsets you unplug both the phone and power to the base station. Press and hold the 'find' button while plugging the power back in. The display will show "CL". Continue to hold the find button till the display shows '00' and all the handsets will show 'unregisterd'. You then proceed by registering all your handsets again in the order you want them listed.

Sep 01, 2010 | Motorola Mobility L4 Cordless Expansion...

1 Answer

Not registered


hello there i think this is because you need to register the second handset with the base here are the instructions

REGISTRATION
Registration links the base to a cordless handset. Once a handset is
registered it can use the base’s phone connection. A cordless handset will
not operate until it is registered to the base. During the registration
process, keep the handset near the base.
1. Press the flash/program button on the base until LINK HANDSET shows
in the display. 2NO is the default setting.
2. Press the 1 number key or press the MESSAGES/CID (or) button
on the base to scroll to 1YES.
3. Press flash/program to confirm handset is linked to the base. WAITING
HANDSET REGISTRATION shows in the display.
4. Press the flash/program button on the handset until LINK BASE? shows
in the display. 2NO is the default setting.
5. Press 1 on the handset keypad or cid/vol (or) button on the
handset to scroll to 1YES.confirmation tone when the handset is successfully linked to the base.
6. Press flash/program on the handset again to confirm. You will hear a long

please leave rating if you find this usefull hope this helps thanx for using fixya!!

Jan 26, 2009 | GE 27958GE1 Cordless Phone

1 Answer

How do you unregister a defective handset so that it can replaced


1. Delete or listen to all voice mail messages, if necessary, to clear the IN USE/Voice Mail light indicator.
Note: Skip this step if it does not apply to your MD Series cordless telephone model.
2. Press OFF on the base station and each handset.
3. Press and hold down PAGE on the base station until the IN USE light flashes slowly, then release.
4. Press and hold down PAGE again until the IN USE light begins to flash quickly, then release PAGE.
5. Quickly and fully press and release PAGE again.
6. Please register handset displays. Press OK to begin the registration process, or press EXIT.

Dec 10, 2008 | Motorola Mobility MD41 Expandable Handset...

7 Answers

Displays new voice mail and VMWI constantly blinking when no voice mail


Subscriber is T-Mobile@Home. First, cleared all messages from T-Mobile voicemail.

Now to fix your GE phone:


Push the program key. Select Handset Setup Push the program key Select Default Settings Push the program key Select 1 Yes. Push the program key
Hope this helps.

Mar 06, 2008 | Uniden Cordless Phone

1 Answer

UNIDEN 5.8 GHZ CORDLESS PHONES


Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
Be sure both handsets are fully charged.
One at a time, place each handset in the base. The charge/in use LED on
the base begins to flash, indicating the base is registering the handset.
Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
Press [end] and continue with the next handset.
Note:
Once both handsets are registered, it doesn’t matter which
handset is placed in the base or the charger.
When you charge the handsets, Caller
ID summary screen and the name of
the handset appears.

This can be find from uniden website.
http://www.uniden.com/pdf/DXAI4588-2om.pdf

Oct 17, 2007 | Uniden TRU8885-3HS Digital Cordless Phone

1 Answer

Cordless Phone


You did record a message on the answerer, didn't you? Mine displayed that until I recorded the outgoing message for the answerer. You do not need any service from your phone provider. The answerer in the base unit simply records the caller's message when you don't answer after a set number of rings. The manual tells you how to name the handset, which is a nice feature if you don't wish to use "unit 1, unit 2, etc".

Aug 28, 2007 | GE 28112EE2 Cordless Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

98921 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7993 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...