Question about Sony KDS-60A2000 60" HDTV

1 Answer

Sony KDS-60A2000 projection TV: power led blinks 4 times

Sony KDS-60A2000 projection TV: power led blinks four times after turning TV on. No picture, no sound.

Posted by on

  • limin_mu Mar 04, 2009

    I changed the lamp 4 months ago, and I did took off and re-examined the lamp just now, it looked fine just like new. When turning on the TV, I first see green led blinds a few times, then I hear a small click from behind the TV, then it switches to red power led blinking 4 times (continuing the pattern). Any more suggestions. Thank you! lmu

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 239 Answers

The projector bulb has gone out you need to replace it.

hope this helped
please rate well

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony kds-r60xbr2 power wont come on and hte power led is blinking red 5 times


The 5 blinks is indicating the lamp ballast needs replacement your model uses the Sony lamp Ballast 147401211 for sony models KDF42E2000, KDS-50A2000, KDS-50A2010, KDS-55A200, KDS-60A2000, KDS-60A2010, & KDS-60XBR2 amd LDS-R60XBR2
Which is available at the bottom of the page at the following link. The ballast comes with installation instructions,
http://www.tvrepairworld.com/sony_circuit_boards/sony_dlp_circuit_boards

Aug 04, 2012 | Sony KDS-R60XBR2 Television

1 Answer

How to reset sony tv KDS.60A2000 after replacing lamp so the warning doesn't keep coming on


With the set turned off:

RESETTING THE LAMP TIME
When replacing the lamp, use the following to reset the lamp time.
1. If the Self-Diagnostic screen is already displayed, proceed to step 4.
If not, Power off (Set to Standby mode).
2. Press DISPLAY Channel 5 Sound Volume -
POWER
3. To access the Lamp reset, press 5 until the TIME category displays.
4. Press 1 until the RSET item displays.

Mar 01, 2012 | Sony KDS-60A2000 60" HDTV

1 Answer

Green power light on my sony 60a2000 blinking repeatedly but no picture


This is a error code normally its the lamp thats burnt out. Count how many times it blinks and check this link for the diagnosis.

http://www.somelifeblog.com/2007/08/sony-tv-led-blinking-codes-what-does-it.html

Jun 06, 2011 | Sony KDS-60A2000 60" HDTV

1 Answer

My sony is turning on and off when I turn it on. The picture and sound appear and disappear. What is wrong and do you have the part..


Hi,

The most common cause of picture disappearing and returning in a Sony LCD Rear Projection TV is a faulty bulb. Replacing the bulb is the first step in troubleshooting this type of problem in KDS-60A2000 and all other Sony Rear Projection LCD TVs.

Sony Lamp Gallery
shows all Models and Lamps for Sony Rear Projection LCD TVs. KDS-60A2000 uses XL-5200U Lamp.

easyab

May 06, 2011 | Sony KDS-60A2000 60" HDTV

1 Answer

I replaced the bulb on the kds-60A2000. Now the red LED power light is blinking 3 times. I know that indicates the lamp door may not be securely attached. I have replaced the bulb before and had no...


The tv know the door isnt on because of an internal switch. Make sure all doors are on usually three blinks indicates door isnt on. If the tv still doesnt power on your balast might be out.

Mar 25, 2011 | Sony KDS-60A2000 60" HDTV

1 Answer

My Green power LED is flashing continuously.. no


Ur power supply board is dead,need a new one.

Sep 30, 2009 | Sony KDS-60A2000 60" HDTV

3 Answers

I have no picture and light flashes 5 times


If you pull the right side out (as you look at the front), get you ear down to the fan exhaust area and turn the set on. If you do not hear the fan turn or feel air being blown out, then you have a defective fan. It is a common problem.
Hope this helps,
Skyassoc

Jun 22, 2009 | Sony KDS-60A2000 60" HDTV

1 Answer

Power LED blinks red


it is a bad fan. it also could be a power supply. Quite often the real problem is dirt clogging up the fan(s) to the point that they need to be replaced. Operation of the set in a dirty environment is not a good idea

Feb 26, 2008 | Sony KDS-60A2000 60" HDTV

Not finding what you are looking for?
Sony KDS-60A2000 60" HDTV Logo

Related Topics:

1,250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...