Question about Onkyo TX-SR705 Receiver

3 Answers

Onkyo TX-SR705 Muting Problem

I have a Onkyo TX-SR705 receiver. When I hit the Muting button the volume gets extremely loud. I tried to set the Muting Level in the Volume Settings menu but it will not respond. It is stuck at “-56db” and cannot be changed. Any ideas?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

If what Dark_Orbit said does not work try doing a master reset by ressing and holding the dvr/vcr button and stand by button simultaneously. This would erase all your assignments so you would need to reassign all your sources hooked up to your onkyo.

Posted on Mar 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had the same problem. I finally sent the unit back to Onkyo for repair. They said that the control board was replaced and the firmware was updated. This was about a year ago and the problem has not returned.

Posted on Jul 06, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Check your setup:
*press setup
*go to Miscellaneous
*go to volume setup
*go to muting level
*make sure that the muting level is on minimum (press the left arrow or the left preset button)
*if it shows a negative infinite sign (its measured in decibels) its ok.
you can now mute it without the loud noise.

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ONKYO TX-SR307. Problem with volume/sound getting lower. "Setup" does not alter / resolve the issue. Please help


Hi, if this has not been resolved please try the following reset:

To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings, Thanks, JT

Mar 02, 2015 | Onkyo Audio Players & Recorders

1 Answer

While wathching TV, the typical volume level


Cleared all AV settings and reprogrammed.

Jan 30, 2010 | Onkyo TX-SR703 Receiver

1 Answer

I have an Onkyo tx-sr605 7.1 channel receiver in which I have set up currently with only with 5.1 channel. The system sounds great, but I am finding that when I set the volume to a level to hear the...


After a long effort searching on Google, I found a solution. There is a Late night setting on the remote that limits the loud sounds scenes so it is not much loader than the dialog. Works great, I can't believe I never notice the button before.

Jan 20, 2010 | Onkyo TX-SR605 Receiver

1 Answer

Center channel has distoration, Ive switched cables and still distortes?


try to change the center speaker.
if the distortion happens when you rotates the volume control . clean the volume control using isopropile alchohal or any head cleaning solution.,

Jan 09, 2010 | Onkyo TX-SR705 Receiver

1 Answer

I AM GETTING VERY LITTLE SOUND FROM THE SYSTEM


When did this start? What happened just prior to that?

Turn the volume DOWN for any further analysis. If it isn't loud enough to hear well at 1/4 volume, cranking it to the stops will not resolve it AND when you finally find the misplaced switch you may launch all of your speaker drivers right out of their cabinets.

Do you mean the MUTE button does not CHANGE the volume? It sounds like you're muted already and it doesn't UNmute. Is MUTING lit on the display?

Does it happen with all sources? Use onboard FM to troubleshoot as it can't be connected wrong.

Apr 01, 2009 | Onkyo TX-DS575 Receiver

1 Answer

"The blue light around my volume dial does not light


Try resetting the receiver (you will lose your setup). I recently reset my receiver and the blue light returned. It's possible that the Audacity setup turns off the blue light because the volume is now being "regulated" by the equalizer.

Mar 26, 2009 | Onkyo TX-SR705 Receiver

2 Answers

TX SR705 Receiver not respomding to Remote


for your mute button:

check your setup:
*press setup
*go to Miscellaneous
*go to volume setup
*go to muting level
*make sure that the muting level is on minimum (press the left arrow or the left preset button)
*if it shows a negative infinite sign (its measured in decibels) its ok.
you can now mute it without the loud noise.

Abaout Remote:

Please make sure that the remote ID is set to 1. this would be on the setup menu of the receiver. The remote ID on the receiver should be the same as your remote. Please refer to page 94 and 98 of your owners manual. it would give you the exact procedure in how to set it.

Jan 11, 2009 | Onkyo TX-SR705 Receiver

1 Answer

Volume on my Onkyo Receiver


Yes it is. I have the 705. My room mate has the 605. Both AVR's will not have appreciable volume until 50 on the dial.
The dial in not linear. I don't know of anyone who has plotted the scaling of the volume control yet.
I have found much useful user info on avsforum.com. Owners post Q&A based on experiences.
Search the forum for "official onkyo TX-SR605" thread.
Some comparable info may also be found under the "official onkyo TX-SR705".

May 21, 2008 | Onkyo TX-SR605 Receiver

1 Answer

Default volume too high


You can download the manual from the link below: http://www.intl.onkyo.com/downloads/manuals/pdf/tx-ds787_manual_e.pdf c. Power On Volume This sets a designated volume setting for the TX-DS787 to be set every time that the power is turned on. This prevents the TXDS787 from being turned on while it is set to an extremely high volume and suddenly output very loud sounds. For the absolute volume display method, this can be set between min and max. For the relative volume display method, this can be set between ?? and 18 decibels. If you do not mind having the TX-DS787 turned on with its current volume setting, set this to "Last." Please update the question & let us know if the information given was useful to you - Good Luck!

Sep 03, 2007 | Onkyo TX-DS787 Receiver

Not finding what you are looking for?
Onkyo TX-SR705 Receiver Logo

667 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

 Grubhead
Grubhead

Level 3 Expert

4853 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...