Question about Sony KP-57WS500 57" Rear Projection Television

1 Answer

REFRESH ERROR MESSAGE

I AM GETTING THIS ON MY TELEVISION SCREEN FOR 2 MINUTES PRIOR TO VIEWING THE FOLLOWING:
FREE PPV AND PREMIUM CHANNELS

IN ORDER TO START SERVICE FOR THIS DEVICE, PLEASE CONTACT YOUR CABLE PROVIDER
CABLE CARDID 000-009-863-402-5
HOST ID 044-014-463-265-8
DATA 105-632-170-32
UNIT ADDRESS 000-00098-63402-210
CARD SN MAO829CAELX6
ECM MAC -----------------------
HOST MAC 00:00:00:00:00:00
REFRESH

Posted by on

  • eetech01 Mar 04, 2009

    THIS IS ON A DCH3200 MOTOROLA CABLE BOX, NOT ON THE PROJECTION TV THAT THIS PROBLEM IS POSTED IN. SORRY ABOUT THAT.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 463 Answers

Sounds like you have a hacked cable box such that you are trying to view PPV and Premium Channels for free? If this is the case, your cable provider has shut down the device remotely, and wants you to 'get legal', as it were.

The error basically says: "If you want this box to work on this cable system, please call your cable provide such that we can activate it and charge you some $$$"

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

SERVICE MODE AND ERROR CODES CHECK


Viewing the Self Check Diagnostic List
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:DISPLAY > Channel 5 > Volume - > TV POWER .
Results for all of the following diagnostic items are displayed on screen. No error has occurred if the screen displays a "0".
NOTE: If the Service Menu display text is not completely visible, press the Menu HOME button on the Remote Commander to refresh the display.
3. To exit Self Check display, turn the power off. Press [Menu] Exit.
Clearing the Self Check Diagnostic List
1. In Service Mode, press the Channel 8 Channel 0 .

RESETTING TO FACTORY DEFAULTSUse the following instructions to restore the User Controls and
Channel Memory settings to the preset factory conditions.1. While holding down the UP ARROW on the Remote Commander, press the POWER button on the right side of the set.The set restarts and displays the initial setup screen. This may take several minutes.
White Balance adjustment
1. Allow approximately 30 minutes for the set to warm up before proceeding with the white balance adjustment.
2. Connect the signal source to the 3 terminals of the Component In input (Y/Pb/Pr).
3. Set the Picture Mode to "VIVID" in the user menu.
4. Select the Component In input.
5. Open the Factory Service Menu (see section 3-1.) and select "Service Alignments Menu".
6. Set "White Point Red", "White Point Green", "White Point Blue" and "Black Level Offset Red", "Black Level Offset
Green", "Black Level Offset Blue" to average values .
"Cool " White Balance Adjustment
1. Select "COOL" from Color Tone in Service Alignments Menu.
2. Input 70IRE full white pattern signal into Component In.
3. Adjust "White Point Red", "White Point Green", "White Point Blue" in Service Alignments Menu if needed.
4. Input 25IRE full white pattern signal into Component In.
5. Adjust "Black Level Offset Red", "Black Level Offset Green", "Black Level Offset Blue" in Service Alignments Menu if needed.
6. Repeat steps 2 to 5 to achieve desired White Balance.
FOR MORE DETAILS CHECK THE FOLLOWING LINK

www.electro-medical.blogspot.com
google.com/+AjinGopakumar

USE SEARCH TAB TO FIND MODELS OR USE THE DROP DOWN MENU

on Jun 30, 2015 | Sony Bravia KDL-26L5000 26 in. LCD HDTV

2 Answers

How do I refresh my computure?


More explaintion needed. Why do you want to refresh Windows? What does Mozilla Firefox have to do with anything?

Sep 02, 2014 | Microsoft Windows 7 Home Premium 64BIT...

1 Answer

How do i tune the channels on a toshiba rc3910


Hi
Before tuning the set to auto tune mode, make sure the antenna or cable, whatever may, connected to its appropriate sockets at the back of the set firmly. To make it autotune:

As new services are broadcast, it will be necessary to

re-tune the television in order to view them.

Auto Tuning will completely re-tune the television

and can be used to update the channel list. It is

recommended that Auto Tuning is run periodically to
ensure that all new services are added. All current

channels and settings, i.e. locked channels, will be
lost.

[1] Select the SETUP from the main menu by using

Up or Down buttons. Press OK and Setup menu
will be displayed.

[2] Select the Installation from the Setup menu

by using Up or Down buttons. Press OK and
Installation menu will be displayed.

]3] Select Automatic Channel Scan from the Installation

menu by using Up or Down buttons and press OK.

A screen will appear warning that previous digital

programmes and settings will be deleted. Select Yes
and press OK to continue with the Auto tuning.

The television will start to search for all available

stations.You must allow the television to complete

the search. When the search is complete the Auto

tuning screen will display the total number of
services found.

* After search is completed for digital channels, a

message asking whether to search for analogue
channels appears on the screen

** Press the OK button to search for analogue

channels. The following menu appears on the screen
for analogue channel search
OK.

Jul 10, 2011 | Toshiba Televison & Video

1 Answer

We have Dish Network VIP722 on only one tv at this time. When recordng PPV, we are unable to change channels without getting message that recording will stop. Menu>Preferences>Record...


We would be happy to help you with that. The first thing we would recommend checking is if the "Record Plus" feature is "Enabled", this can be found to the left of the "Record Preferences" on the "Record Plus" screen. The other thing we would recommend is to ensure that the tuner that you are viewing is for the TV1. You can swap between the tuners by pressing "Input" button while in SAT mode.

This should get things set up the way you want it. Thanks for choosing DISH Network!


Phillip Chang
DISH Network Customer Service Representative

Mar 05, 2011 | DISH Network ViP722 DTV Receiver /...

1 Answer

Does the sharp Aquos LC-52 support HDCP? I have Dish Network and for some reason can't watch any HD PPV channels, Dish Network says it's a TV issue. Can you help?


DISH Network blocks multiple video outputs on all PPV and most premium content to prevent recording, and they will tell you it is a TV issue. Ensure that your receiver only has one video cable coming out, to only one device (ie HDMI to the TV) and try again.

Oct 03, 2010 | Sharp Aquos LC-52SE94U 52 in. LCD HDTV

1 Answer

Sv5


the ppv channel only comes in when there is a fight or wrestling on ppv otherwise you wont get it it remains blank/scrambled

Apr 26, 2010 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

How do i get my funai vcr to record from my freeview box. I can only record through my analogue channels. I have a funai vcr either 31B-750 or 31B-754 (PDC) and the freeview is an Astratc TopD2


hi, how is the free view running through the video?

Option 1(this is the most complicated way if you are using scart lead or the three color leads then skip to option 2)

if you using the normal arial socket ie arial from roof goes into free view then from free view into vid then vid into tell then what you need to do is make sure on the free view that you have a menu screen on the screen either tv guide or something that will stay on their.
Now put the video on a channel you dont use say 6 then you need to use the video remote and then enter the setup mode and then start the scanning process to look for the signal keep going until you get the menu screen that you opened on the free view then store this as channel 6 on the video.
Now when you want to record from the free view you put the video on channel 6 and put the free view on the channel you want to record.

Option 2:
If you free view box is using scart leads and has two scart lead outputs on the back, ie one for the telly and the other for the video, if you have it like this then plug telly scart into telly and video scart into video.

Now in the back of the video you should have scart lead coming from the free view, and maybe one coming from the video into the telly
If this is the case then all you need to do to record off free view is switch the video on the when you choose what channel you want to record instead of choosing 1 to 5 for normal channels you need to select av scroll down the channels past zero if you have not got av button once av is selected you should then see the free view channels try by pressing guide on the free view and put the video on av this should then let you see the free view via video if not dont worry press record for 5 min then rewind and press play it should now play back the free view you was just watching.

Option 3 now if you have it set up any other way just let me know how then i can assist you further ok.

If you have any problems following my instructions then just post me a message back and ill be glad to assist you further ok.

Many thanks for using fixya.com


Nov 18, 2009 | Electrical Supplies

1 Answer

TC-32LX85 only stay on 5 minutes.


Just found a solution to this problem (conveniently hidden on unlucky page 13 of the user manual). This means that your TV is in store mode... it refreshes every so often and changes to the different inputs to show store viewers the quality of different inputs.

First, go to Menu - Setup - Advanced Setup and make sure that the "Auto power on" is set to "No." Turn the TV off and unplug it. Plug it back in. Press and HOLD the power button on the TV (not the remote). Hold for 2-3 seconds or so... you'll hear a few clicks. Release the button, then press it. The first thing that pops up should be, "Select viewing environment." Make sure you select "Home." Continue with setup from there.

Voila!

-Zach-

Aug 22, 2008 | Televison & Video

Not finding what you are looking for?
Sony KP-57WS500 57" Rear Projection Television Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...