Question about Fujitsu Siemens AMILO Pro V2000 Notebook

3 Answers

Master password for amilo pi 1505 SN :YSLN034495 After three attempts i receive the message System Disabled 05691

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Http://dogber1.blogspot.com/

Posted on Sep 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 82 Answers

Sorry to be the bearer of bad news , but you are out of luck.

I saw a post in a forum that there may be a backdoor password of SKY_FOX , but it didnt work for that person.

On older systems , removing the CMOS battery and shorting two pins on the motherboard would clear the password. On newer systems it is held in non-volitale memory so this will not work. Also CMOS crackers worked on older systems but will not work on this one.

The only way to clear it is to replace the chip on the motherboard which contains the password. Which means you need a new motherboard as Siemens wont sell the chip by itself.

There is a similar situation with IBM thinkpads. There is a way to recover those but only by building a special device to interface with the com port, dump the results to a file and send it a guy who makes a living decrypting IBM passwords. He doesnt support your PC though. And your PC doesnt have a com port anyway.

From what I understand it is around $300 to ship it to Siemens to have them fix it. I think I would just get another PC.

Posted on Mar 04, 2009

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This program solves this problem.. it generates your password for you
this type of laptop does not have the one master password.

just run the program and follow instructions ... worked for me.

http://sites.google.com/site/dogber1/blog/pwgen-5dec.zip

Posted on Aug 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After completing the 45 minute relearn procedure for a 2004 Pontiac Grand Prix message center Now says system not programmed


Relearn for what ? Anti theft system PK3 ? The relearn procedure is three 10 min. procedures for a total of 30 min.
30-Minute Relearn Procedure
Use this procedure after replacing the following components:
?€¢
The passkey III (PK3) keys


?€¢
The BCM


?€¢
The PCM, see important above

Important: This procedure is not available on vehicles equipped with option code (Z49).
If replacing a BCM with an GM SPO Replacement Part, perform the procedure to setup a new BCM prior to the 30-minute relearn procedure.

  1. With a master passkey III key, turn ON the ignition, with the engine OFF.
  2. Observe the STARTING DISABLED DUE TO THEFT message on the drivers information center (DIC), after approximately 10 minutes the STARTING DISABLED DUE TO THEFT message on the DIC will turn off.
  3. Turn OFF the ignition, and wait 5 seconds.
  4. Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
  5. Important: The vehicle learns the key transponder information and/or passwords on the ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.
  6. With a master passkey III key, start the vehicle. The vehicle has now learned the key transponder information and the PCM has now learned the fuel continue password.
  7. With a scan tool, clear any DTCs.

Dec 07, 2015 | Pontiac Cars & Trucks

1 Answer

How do you replace the dc power jack on a Fujitsu Siemans Amilo Pi 1505 Laptop?


try ebay for another. Alternatively there may be chinese suppliers who can offer replacements. just check you're happy it's not a dangerous one, it'd be better to get a new laptop than risk electrocution!

Aug 28, 2010 | Computers & Internet

1 Answer

Fujitsu Amilo Pi 1505 25-03-2010 I have a Fujitsu Amilo Pi 1505 Laptop. The screen goes black when viewed at normal angle, when lowered at 45 degrees it comes on. We opened bottom cover and removed the...


With so many questions that really relate to your dexterity and skills! Who can best answer your questions! Yea that person in the bathroom mirror is the only one that will show the fortitude and trail blaze the way. Then boast of their success!

Mar 25, 2010 | Fujitsu AMILO Pro V1000 Notebook

1 Answer

Password when I start up my Fujitsu Siemens Amilo Pi 1536


hi astrid
can u please explain is the password on bios

Jan 07, 2009 | Computers & Internet

1 Answer

Bios master Problem


For a Siemens your master reset is [SKY_FOX] without the brackets.

Here is a link to all of them. Scroll down until you see the list for all BIOS makers.

Regards,
Worldvet

Jun 07, 2008 | Fujitsu Siemens AMILO Pro V2000 Notebook

1 Answer

Keyboard Problem


My advice would be tp return to the purhaser as if you mess about with the keyboard and really damage it then your warranty will be void.

Feb 25, 2007 | Fujitsu Siemens AMILO Pro V7010 Notebook

Not finding what you are looking for?
Fujitsu Siemens AMILO Pro V2000 Notebook Logo

1,745 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Siemens Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Marcin

Level 2 Expert

191 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Fujitsu Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...