a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to an Expert (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes, your 600d has 1/4 threads at the bottom wich is ideal for tripod mounts, take the tripod head off the tripod, and line up the 1/4 tripod head and camera and screw in the tripod head into the camera (bottom), if any questions contact me thanks
It is usually obvious where the camera goes, so I am pretty sure that what you have is a tripod with a quick release plate that doesn't have the quick release plate fitted. This is very common when you buy a tripod second-hand. The quick release plates get attached to a camera and people forget to reunite them with the tripod before disposing of it.
If you bought the tripod new, then look in the packaging for a plate with a screw to attach to the normal camera tripod screw in socket. There ought to be more than one. The screw is standard throughout the world, except maybe Germany that used to use a different size. Any camera you have will have this socket on the bottom, a threaded hole about a quarter inch (5 or 6mm) in diameter. The plate will be a design peculiar to this make of tripod, and if you lose it or don't have it you will be unlikely to get another.
Check the back of the camera to check if there is a hole with thread.
The top part of the tripod usually comes out. Screw the top part of the tripod to the camera and after that attach it back to the tripod.
If you need further assistance, just leave a comment.
Your tripod is a K-Mart brand item and it will fit any camera but it's clearly missing the quick-release foot which most tripods have these days. This part screws to the bottom of the camera and enables the camera to be quickly attached and removed from the tripod.
Unfortunately there is no standard foot shared between manufacturers and most tripod manufacturers don't even have a standard design foot which fits all models in their range.
not sure about the brand tripod but all good ones have a 1/4 standard screw that has blank shoulder so it spins freely yet stays in place there..see your local pro camera store for a 'camera mounting screw'..... or order from samy's camera online