Question about Samsung BLUETOOTH? WEP210 MONO HEADSET AWEP210JBECXAR Wireless Headset

3 Answers

Unable to pair my bluetooth with PS3

Unable to pair by samsung model wep210 headset to ps3, it shows its still scanning but no results, oncei kepet my ps3 scanning for one hour no responce it keeps scanning as its gone freez

Posted by on

  • 3 more comments 
  • nameetkoli Mar 04, 2009

    Hi dude thanks for your kind reply, but i have did this but still not able to pair my headsets, actually i was thinking does samsung wep210 compatible to connect my ps3 might need to find out on samsung support.

  • nameetkoli Mar 04, 2009

    hI dude Thanks again, well i get answers so fast thats really great, well i have cheacked my ps3, it is not able to register my bluetooth device it keeps scanning to search a bluetooth device but there is no end of this search, but well i have tried an nokia bluetooth headset device it was able to connects, now this means samsung is not at all compatable with ps3

  • nameetkoli Mar 04, 2009

    gr88 i have registered it samsung is registered thats good idea the light shoulden blink it shud stay lit thank dude i will help others to pair it also, you r fantastic

  • Anonymous Mar 13, 2009

    Nice, thanx for the help.
    I have the official bluetooth 4 PS3
    http://www.consoleshop.be/product/59003/...

    You have to keep pushing (5secs) for the Green (AND Red) light. Grtz

  • Anonymous May 09, 2009

    i managed to connect it to my 40GB version easily but my new 80GB wont recognise it

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

Is The Blue Tooth In Find Mode? To Inable Find Mode Hold The Power Button Until The Blue Tooth Stays Solid Lit Or Flashes. Then Search For It With Your Device And Once Completed Hit The Power Button Again And It Should Be Able To Pair Right Up.

Posted on Mar 04, 2009

  • 3 more comments 
  • Michael Fisher
    Michael Fisher Mar 04, 2009

    I Have Checked Into And It Seems Your Not The Only One Unable To Connect Let Me Check To See If Its Possible And I Will Get Back To You Momentarily.

  • Michael Fisher
    Michael Fisher Mar 04, 2009

    It Says For Ps3 Any Blue Tooth Will Work. Let Me See How Its Done Exactly.

  • Michael Fisher
    Michael Fisher Mar 04, 2009

    On Your Blue Tooth Hold The Button The Blue Light Will Start To Blink Keep Holding It Till It Stays Lit.

    Then ON Your Ps3 go into settings, acc settings, register blue tooth device, register headset, click yes, Then it should be found.

  • Michael Fisher
    Michael Fisher Mar 04, 2009

    So It Worked Then Right?

  • Michael Fisher
    Michael Fisher Mar 04, 2009

    Thanks Man Have A Good Week.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Great it work

Posted on Jun 08, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My bluetooth headset isnt working roght. i can hear other people through it but they cant hear me. and i did the output and input thing but still wont work. any advice?

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installing mad catz ps3 bluetooth


In order to use it you have to pair it with the PS3.

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Feb 27, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

Im trying to hook up my mad catz bluetooth to my ps3 and i got it pass the scan part but it keeps saying theres a problem...PLEASE HELP


Is your PS3 seeing the Headset?
Is the headset in pairing mode?

Complete details below on how to connect it:
Pairing the Headset with the PS3

Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Feb 22, 2011 | Mad Catz Bluetooth Headset for PlayStation...

1 Answer

Samsung WEP210 work on PS3


yes they do work on ps3.......read your manuall for both items and the solutions are there

Feb 17, 2011 | Samsung BLUETOOTH? WEP210 MONO HEADSET...

1 Answer

I cant find instructions to sync my Mad Catz PS3 Blu tooth headset


Hope it helps:


Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Jan 30, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

I am unable to sync my Mad Catz bluetooth to my PS3 and I can't find my bluetooth manual. How do I sync up?


Please see the sync details below:

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Jan 28, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

How do you get the ps3 to pick up the blue tooth head set


Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be ‘paired’ so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the “Settings” menu, press X on “Accessory Settings.”

3. Press X on the icon labeled: “Manage Bluetooth® Devices.”

4. Scroll down and press X on the icon labeled: “Register New Device.”

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.


6. Once the Headset’s LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on “Start Scanning.”

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate “8860” from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: “Register completed”

Trouble Shooting
Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Source: www.madcatz.com/faq

Aug 11, 2010 | Mad Catz PS3 Bluetooth® Headset Wireless...

1 Answer

I got my samsung wep200 and I am unable to connect


You must put your headset in pairing mode, prior to making your PS3 search for new devices. To do it, start with your headset turned off. Then, press and hold the MFB (Multi-Function Buttons) for some 8 seconds, until the indicator light is steadily lit in blue. Now, make your PS3 search for new devices. After a little while the WEP200 should show on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
By the way, if your headset's user guide happens to be missing, feel free to download it from this location (if this link fails, please, let me know. I will upload it to some file sharing server for you).
Hope you are able to sort your problems out soon.
Regards, Carlos

Jul 23, 2010 | Samsung WEP200 Wireless Headset

1 Answer

I m unable to pair my wep210 headset with my samsung omnia i900 mobile


the wep210 multifunction button needs to be pressed till blue light flashes then stops on blue light continuious this is when you ask your phone to find bluetooth devices it will pick it up

Jan 28, 2010 | Samsung BLUETOOTH? WEP210 MONO HEADSET...

2 Answers

How to pair the bluetooth headset to the ps3


Hi,

This is the info i got when i was looking to pair my headset with my PS3.


1. Turn your bluetooth headset on. It should flash on/off every few seconds.

2. Go to Settings > Accessory settings > Manage bluetooth devices.

3. Put the headset in "pairing mode".

4. Start to scan for the device. PS3 should pick it up. It will display the model if successful.

5. Once it's found it hit the options button. Connect the device (pairing mode) A blue icon will pop up.

6. Your headset will stop flashing meaning it has connected successfully.

7. Go back out and click on the audio device settings.

8. Input device > select "your headset". > output device > "your headset".

9. Hit the "connect bluetooth" icon. Then OK.

10. Your headset should now be successfully connected.. start talking into it to see the bar level move up and down to confirm its working.
Hope it helps.

Best Wishes,

Karlos

Jun 28, 2009 | Radio Communications

4 Answers

Pairing my headset to the PS3


Ok people, here is how it is done- Turn off your bluetooth. When it is off, press and hold the main button (power button) until it flashes(keep holding even after it flashes). The light on the device should turn solid blue (instead of flashing) now you can let go of the power button. My device was picked up immediately... after 2 hours of trying to figure it out of course, lol. Hope it works for y'all!

~Live long and prosper ;)

Jan 06, 2009 | Radio Communications

Not finding what you are looking for?
Samsung BLUETOOTH? WEP210 MONO HEADSET AWEP210JBECXAR Wireless Headset Logo

1,439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Radio Communications Experts

kakima

Level 3 Expert

102366 Answers

ivan georgiev
ivan georgiev

Level 2 Expert

128 Answers

Mike Neath
Mike Neath

Level 3 Expert

315 Answers

Are you a Samsung Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...