Question about Gateway FPD2275W LCD Monitor

1 Answer

Gateway 22" flatscreen monitor won't display after startup

Screen won't display. Gateway logo display during start up, then diappears. Power touch button turns abmer after a few seconds and nothing show on screen. Another monitor works just fine with the computer, so issue must be with monitor. Any answers out there?

Posted by on

  • bigtola Mar 24, 2009

    Screen won't display. Gateway logo display during start up, then diappears.



    And what will it cost to fix err. Or is it worth it.

  • mark
    mark May 11, 2010

    http://support.gateway.com/support/supin...
    http://support.gateway.com/s/MONITOR/701...

    have a look at these two sites they might be help to you


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 558 Answers

Monitor has blown capacitors internally on the power board I can fix these let me know what you would like to do.

Posted on Mar 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

This is the strangest thing I've ever seen. I have a Gateway FPD1975W TFT Monitor and its always worked great. The other day it went into a sleep mode via windows, and now it wont boot up the input...


Hello,

Your monitor problem is causes by the power supply. What is happening is the power supply voltages are not stable, just enough to power the unit up. When you connect it to a video signal the power demands slightly increase and the power supply can't handle it. This is a very common problem with LCD after a few years of use. The issue with the power supply is the capacitors have started to fail. These parts are used to filter the output voltage and when they start to fail the outputs start rippling hence the problem you are having. Here is a link to a repair article that shows how to repair the Gateway FPD1975W monitor.

http://www.ccl-la.com/blog/index.php/gateway-fpd1975w-monitor-repair/


I hope this helps you get back going.

BuddyMc

Sep 20, 2011 | Gateway FPD1975W 19" LCD Monitor

1 Answer

I have a gateway FDP2275W desktop monitor. the monitor will power up and display the Gateway logo in the middle of the screen, then goes black. The monitor is still getting a signal from the computer as...


This is a common problem with many LCD monitors. The
printed circuit board that provides a stable voltage for the monitor to operate
from starts to fail. The PCB can be replaced, when/if they are available, or repaired
in most cases at a much lower cost. for more information on this email me at
Sprint6@zoominternet.net

Dec 26, 2010 | Gateway FPD2275W LCD Monitor

1 Answer

Gateway HD2201 monitor, the touch menu buttons are not working. The menu is up on the screen but cannot get it to go way since the touch buttons do not work. Any ideas? Is there a way to reset that may...


kruwv, Use Gateway warranty first!!! Else gateway swapout+ cash for a factory refurbed unit if program exists. Did you un-plug unit from wall outlet and then reconnect power? Problem same? How old is unit? Approximate total "ON" Hours does unit have??? Do any of the buttons appear to be "stuck"?? Was unit working perfectly the "day" before? When strange things occur with CCFL backlit LCD displays I would first suspect the "switch-mode-power-supply" as area to look first. Read some of my other responses in my FIXYA profile for more options for repair. 12fixlouie

Jan 04, 2010 | Gateway HD2201 22" LCD Monitor

1 Answer

ACER 22" monitor flashes on at PC startup, then goes black


Your monitor has a bad INVERTER, look on eBay.

Jun 27, 2009 | Computers & Internet

1 Answer

Fpd2275w monitor problem


Have you unplugged the power cord for 2 min. Try that, there are problems with these "locking" and unplugging sort of "reboots" them.

Jun 01, 2009 | Gateway FPD2275W LCD Monitor

1 Answer

Gateway 2" monitor won't display


blown capacitors this can be fixed I can help or advise you how to do it but it will require soldering internal components.

Mar 04, 2009 | Gateway FPD2275W LCD Monitor

2 Answers

Dell 410XPs + Dell 3007WFP monitor issues


Vinod,
That's quite strange as during system startup you should see the Dell POST logo as at that point the card is only running at VGA, and the monitor will support display at this resolution. If you connect with a normal single DVI cable the monitor should display at 1280x800 also.
Have you tried this? Also have you had this monitor working on another computer at all? What happens if you power up the 3007 with no video cable connected? It should cycle through the pixel test screens. If you are not getting that, and you are not getting the pre POST logo during powerup i suspect that it is a screen failure.

Aug 03, 2008 | Dell Dimension XPS PC Desktop

2 Answers

Will come on-then say no signal


If you mean the monitor is fine during the Windows booting process and then just as your about to go into Windows goes black then do this...

Start the computer
When the bios screen goes start pressing F8
A Windows Startup screen will appear
If you see the Windows Logo (the loading one) then hit reset and try again
At the Windows Startup page, select Safe Mode and press enter twice.

Windows will now load. Go into Device Manager (Start-Settings-Control Panel-System-Device Manager)
Select the video card, and uninstall it.
Restart Windows
Reinstall your video card using the Installer package (if it's ATI or nVidia)

If this dosn't work, then post back and we will try something else

Apr 16, 2008 | Gateway FPD2275W LCD Monitor

2 Answers

22-inch Wide screen X2Gen LCD Monitor


Monitor Help CH000241, No display on the monitor. CH000242, Distorted or skewed image on monitor. CH000243, Monitor has a tint of one color.

Good Luck, Please dont for get to Vote/Thank You.

Dec 19, 2007 | Gateway FPD2275W LCD Monitor

Not finding what you are looking for?
Gateway FPD2275W LCD Monitor Logo

Related Topics:

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...