Question about Pioneer KEH-P2030 Cassette Player
Turn off power to unit wait 5sec to shut off hold the source button down than press and hold down the function or f button till beep and scroll threw features by pressing function or f button and clock should be located there turn power back on after setting by pressing the source button and time should be set on unit
hope this helped
Posted on Mar 04, 2009
I just tried it after researching on other sites. Keep the ignition on and the power to the stereo off. Hold down the function button (on the lower left for the DEH-P47DH) for a few seconts and the arrows will let you adjust the time.
Posted on Aug 01, 2008
Shut it off then hold the function button, cycle through till you find your option to turn it on, the turn the radio back on and use you source button to change to CD, TUNER, and AUX
Posted on Dec 27, 2008
SOURCE: clock setting
Setting the Time
This is the mode for setting the time on the unit’s clock display. (Refer to page 51 for
details concerning the clock display.)
As soon as you switch to “Minute”, the seconds start counting from 00.
1. Press the FUNCTION button and select the Time setting mode in the InitialSetting Menu
always select “OFF”.
2. Select “Hour” or “Minute”
with the < / > buttons.
3. Set as desired with the ^ / v
Posted on Jan 04, 2009
Adjusting initial settings
1 Press SRC/OFF and hold until the unit
2 Press MULTI-CONTROL and hold until
CLOCK SET appears in the display.
3 Turn MULTI-CONTROL to select one of
the initial settings.
CLOCK SET (clock)—AUX (auxiliary input)
# To return to the previous display, press
# To return to the main menu, press and hold
# To cancel initial settings, press BAND/ESC.
Setting the clock
Use these instructions to set the clock.
1 Use MULTI-CONTROL to select
CLOCK SET in the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Press MULTI-CONTROL to display the
3 Press MULTI-CONTROL to select the segment
of the clock display you wish to set.
Each time you press MULTI-CONTROL, one
segment of the clock display is selected.
As you select segments of the clock display,
the selected segment blinks.
4 Turn MULTI-CONTROL to put a clock
Posted on Jan 30, 2010
SOURCE: cant set the clock on
Instructions from the Owner's Manual:
1. Press SOURCE and hold until the unit turns off
2. Press AUDIO and hold until time appears blinking in the display
3. Select the portion of time you wish to set (hours/minutes) with </>
4. use ^/v to set time
Posted on Mar 02, 2011
Tips for a great answer:
Jan 04, 2012 | Pioneer DEH-7300BT Car CD/ MP3 Player
Mar 02, 2011 | Pioneer DEH-1400 CD Player
Press FUNCTION to select the time.
Press FUNCTION until the time appears in the
2 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
As you select portions of the clock display the
portion selected will blink.
3 Select the correct time with 5/?.
Pressing 5 will increase the selected hour or
minute. Pressing ? will decrease the selected
hour or minute.
Dec 06, 2010 | Pioneer DEH-P440 CD Player
Aug 29, 2010 | Pioneer DEH-P8MP CD Player
Jan 24, 2010 | Pioneer DEH-2800MP CD Player
Nov 18, 2009 | Pioneer DEH-P6800MP CD Player
May 23, 2008 | Pioneer DEH-P2000 CD Player
Jan 04, 2007 | Pioneer DEH-P47DH CD Player
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: