Question about Mabis Automatic Digital Blood Pressure Monitor 04-342-000

1 Answer

WITH AUTOMATIC CUFF BLOOD PRESSURE MONITOR GETTING ERROR

AFTER PUTTING THE CUFF ON RIGHT HAND ABOVE THE ELBOW ALWAYS GETTING ERROR BY SHOWING E ON THE MONITOR AND READING IS UNABLE TO COME.
PLEASE ADVISE THE CAUSE AND ITS REMEDY the monitor has no problem reading my blood pressure but reads on my moms error after it inflates.

Posted by on

  • Anonymous Mar 22, 2014

    IT AIRS UP A LITTLE AND QUITS THEN SHOWS E1

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

E might represents insufficient inflation for your mom. For automatic inflation monitors usually there is a mechanism to keep inflating the cuff to higher pressures for people with higher BP. Check how is done. In some auto monitors,while cuff is inflated you keep pressing on START button until pressure reaches to some 15 to 20 mmHg higher than the pressure that auto usually stops and displays E.

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the cuff on my digital blood pressure monitor pinch


Cuff size, i believe you have to loosen the cuff for your arm size above the elbow

Aug 16, 2014 | Mabis Blood Pressure Monitors

1 Answer

The blood pressure monitor reads error 1


make sure you are getting the reader part on the artery just above the bend in the elbow. you may need a new cuff.also make sure it is snuggly plugged into the machine.

Apr 07, 2012 | Mabis ® Automatic Premium Blood Pressure...

1 Answer

Showing ee in the diastolic section, therefore its not taking the b/p


There are 3 things can cause the EE error code.

1. Cuff was placed incorrectly. Wrap cuff snugly around your wrist 1" above the heel of your left hand.

2. Moving or talking during measurement. Measure again keeping your wrist steady during measurement.

3. Shaking of the wrist with the cuff on. Solution is the same as # 2.

If you continue to have a problem with the cuff, contact HoMedics Customer Support 1-800-466-3342.

I hope this info was helpful and thanks for choosing FixYa.

Sep 15, 2011 | Walgreens By HoMedics Automatic Wrist...

1 Answer

When the blood pressure monitor reads E- error. What is the reason? Not keeping the wrist still?


It depends on which E-error you're getting.

EE - indicates several things:
  • Cuff has been placed incorrectly. Always place cuff on wrist 1" above heal of hand.
  • Did you talk or move during measurement?
  • Shaking of the wrist with the cuff ON.
E1 - Air circuit abnormality. Measure again.

E2 - Inflation pressure exceeding 300 mmHg. Switch the unit OFF.Wait 1 minute, then measure again.

E3 - Error determining measurement data. Measure again.

Hope this helped you to determine which Error you're receiving. Please let me know.

Apr 30, 2011 | Walgreens By HoMedics Automatic Wrist...

3 Answers

I have a blood pressure sphygmomanometer, how do you take a blood pressure reading and what is normal?


Much easier to go to a store, like Walgreens and get an inexpensive ( like 15 dollars) automatic wrist cuff blood pressure monitor, that will give you accurate and quick readings of your heart rate, and blood pressure, systolic and diastolic, automatically.

Apr 03, 2011 | Walgreens Blood Pressure Monitors

1 Answer

When my wife takes her blood pressure she gets error 3 every time. When I do it, it works. What could we be doing wrong.


2 things could be causing the problem, when your wife is doing it.

1. Improper placement of the cuff. If should be at least 1" above the heal of the hand and the cuff snugly applied.

2. Movement when the monitor is in operation. Hold hand and arm very still.

Also, for the most accurate reading, the hand/wrist should be at heart level.

Hope this helps clear up the problem for you.

Mar 07, 2011 | Walgreens By Homedics Automatic Blood...

1 Answer

I have a cuff like this and get an error saying EE


According to the Owners Manual, the EE Message shown on the display or the blood pressure value is displayed when an excessively low (or high) reading is detected OR as a result of one of the following:

1. Cuff has been placed incorrectly. Solution: Wrap cuff properly so that it's positioned correct.

2. Did you talk or move during measurement? Solution: Measure again. Keep wrist steady at heart level during measurement.

3. Shaking or moving of the wrist with the cuff on. Solution: Same as # 2.

NOTE: Be sure the cuff is placed exactly as pictured on the face of the box, 1/2" above the heel of the hand.

Jan 27, 2011 | Walgreens By HoMedics Automatic Wrist...

1 Answer

Blood pressure cure keep reading error and it is never charge even keep the machine charging overnite


Make sure that the cuf is over your artery, there will be a little plastic point in the cuff to show you where it goes, which is right in the fold of the upper arm from the elbow..... Take care.... Guy

Sep 06, 2010 | Walgreens By Homedics Automatic Blood...

1 Answer

WITH AUTOMATIC CUFF BLOOD PRESSURE MONITOR GETTING ERROR


Try different locations. The sensor must be over a vain to pick up the pulse. Locate the point on the cuff where the sensor is, and place this over the elbow. That should work. Good luck.

Feb 07, 2009 | Omron Automatic Blood Pressure Monitor...

1 Answer

Cuff position


An upper arm monitor will come with a cuff that you need to wrap around your arm. If you use a cuff that is the wrong size for you, your reading will not be correct. Measure around your upper arm at the midpoint between your shoulder and elbow. Most monitors will come with a medium sized cuff. You may have to order a different sized cuff separately.

Aug 27, 2008 | Haba MDF Thigh Single Tube Latex Free...

Not finding what you are looking for?
Mabis Automatic Digital Blood Pressure Monitor  04-342-000 Logo

1,501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mabis Blood Pressure Monitors Experts

Cindy Wells

Level 3 Expert

4756 Answers

yadayada
yadayada

Level 3 Expert

60887 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Mabis Blood Pressure Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...