Question about Whirlpool GHW9150 Front Load Washer

1 Answer

Whirlpool Duet Washer GHW9150PW1

The Control Locked light is on...the door will open and close, it isn't locked. I pressed all the buttons with no luck, nothing turns on, can't start a new cycle.

Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 106 Answers

Swich off the machine, try some WD40 on the door mechanism (on machine lock, not on the door) and open & shut for a minute or two. Then try the machine, spin only just to try.

Rate pl, if solved, or dont!

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Control lock lit, no other buttons work


Instructions
    • 1 Press any of the buttons on the control panel to see if the buttons are operational or check to see if the "Control Locked" indicator light is lit. If the control panel is operational, you may mistakenly lock the door.
    • 2 Press and hold the "End of Cycle Signal" button for approximately three seconds until the "Control Locked" indicator light shuts off. The control panel is now unlocked, and the washer is ready for use.

    • 3 Lock the washer again by pressing and holding the "End of Cycle Signal" button until the "Control Locked" indicator light turns on.

Read more: How to Unlock the Control on a Whirlpool Duet ' eHow.com http://www.ehow.com/how_5701217_unlock-control-whirlpool-duet.html#ixzz2HVS4i8hL

Jan 09, 2013 | Kenmore HE4t 3.8 Cu. Ft. King Size...

1 Answer

Whirlpool duet washer, door locked light on door open no other lights on unable to set control


The control can be locked to keep the buttons from activating during external cleaning or to help from small children starting the machine.

To activate or deactivate press and hold the "end of cycle signal" button for 3 seconds.

Jun 21, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Door won't open. door locked light stays on. I


Hi,


Press and hold the End of Cycle Signal button for three seconds. This will turn off the Control Lock feature.


Thank you !!

Jul 27, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Front door wont close control locked light is on


Hi,


Press and hold the End of Cycle Signal button for three seconds. This will turn off the Control Lock feature.


Thank you !!

Jun 18, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a control locked alarm on a whirlpool duet washer??


Press any of the buttons on the control panel to see if the buttons are operational or check to see if the "Control Locked" indicator light is lit. If the control panel is operational, you may mistakenly lock the door.

Press and hold the "End of Cycle Signal" button for approximately three seconds until the "Control Locked" indicator light shuts off.

Jun 03, 2010 | Whirlpool Duet GHW9150P Front Load Washer

3 Answers

Whirpool Duet Washer Model GHW9150PW1 Control Locked


I had the same exact problem, the answer is in the User's Manual for this model Dryer, also here: The Users Manual reads: "TO UNLOCK": Press and hold the END OF CYCLE button for 3 seconds to turn this feature off. I did this and it worked perfectly the first time! My first load is drying now after months of being without the dryer (too busy to investigate!). Good luck.

Oct 26, 2009 | Whirlpool Washing Machines

1 Answer

My control panel is locked on my Duet Wirlpool washer model # GHW9150PW1 how do I unlock it?


This may or may not be an indication of a serious problem. In the majority of the cases, this is a simple operator error. Nearly all these model appliances have some sort of Control Lock feature on the front panel now. This is a designed safety feature that is used to prevent small children from manipulating the controls. The controls can be easily locked or unlocked by pressing and holding the following button on the front panel:

Whirlpool Duet Washer - Press and hold the END OF CYCLE SIGNAL button for 3 seconds.

Whirlpool Duet Dryer - Press and hold the END OF CYCLE SIGNAL button for 3 seconds.

Kenmore Elite Washer - Press and hold the DRAIN/SPIN button for 3 seconds.

Kenmore Elite Dryer - Press and hold the AUTO DRY LEVEL button for 3 seconds.

These instructions may not be all inclusive for all Kenmore and Whirlpool models, but they are the most common. Chances are, if you have a Control Lock feature, the instructions will be printed on the front panel adjacent to the button that is required to lock or unlock the controls.

NOTE: These instructions may also work for newer model Maytag, Hotpoint, Admiral and Fridgidaire model front loaders as well. Refer to your owner's manual or front panel for instructions pertaining to your sepcific model.

If the Control Lock feature will not lock or unlock the appliance, unplugging the unit for AT LEAST 30 minutes is recommended in order to reset the main control board. In many cases this is all that is required to correct momentary glitches.

If this does not solve your problem, or if you have additional questions, please let me know.

Jul 09, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The "control locked" light on my ge whirlpool stays lit and


its in small print under one of the buttons. I can't remeber which one it is either. usually you will see a pad lock symbol press andhold tha key down for 3 seconds

Jan 04, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet Ghw9150pw1 would not start


This advise is for Kenmore Elite and Whirlpool Duet front loader washers and dryers with a Control Lock problem.

This may or may not be an indication of a serious problem. In the majority of the cases, this is a simple operator error. Nearly all these model appliances have some sort of Control Lock feature on the front panel now. This is a designed safety feature that is used to prevent small children from manipulating the controls. The controls can be easily locked or unlocked by pressing and holding the following button on the front panel:

Whirlpool Duet Washer - Press and hold the END OF CYCLE SIGNAL button for 3 seconds.

Whirlpool Duet Dryer - Press and hold the END OF CYCLE SIGNAL button for 3 seconds.

Kenmore Elite Washer - Press and hold the DRAIN/SPIN button for 3 seconds.

Kenmore Elite Dryer - Press and hold the AUTO DRY LEVEL button for 3 seconds.

These instructions may not be all inclusive for all Kenmore and Whirlpool models, but they are the most common. Chances are, if you have a Control Lock feature, the instructions will be printed on the front panel adjacent to the button that is required to lock or unlock the controls.

NOTE: These instructions may also work for newer model Maytag, Hotpoint, Admiral and Fridgidaire model front loaders as well. Refer to your owner's manual or front panel for instructions pertaining to your sepcific model.

If the Control Lock feature will not lock or unlock the appliance, unplugging the unit for AT LEAST 30 minutes is recommended in order to reset the main control board. In many cases this is all that is required to correct momentary glitches.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Aug 21, 2008 | Whirlpool GHW9150 Front Load Washer

Not finding what you are looking for?
Whirlpool GHW9150 Front Load Washer Logo

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...