Question about Breadman Breadmakers

2 Answers

Breadman Ultimate bread pan leaks.

My bread pan on the Breadman Ultimate is leaking. Liquid comes out from around the circular piece attached to the bottom of the bread pan on the outside at the bottom. I don't know if the seal is leaking or what it is. Is there a way this can be fixed? If not, is there a replacement part?

Posted by on

  • Anonymous Mar 09, 2009

    Same problem! Unfortunately the only long term fix is to purchase a new pan for $45!! I'm getting around the leaking issue temporarily by placing the dry ingredients in the pan first (in reverse order). But I'm limited to the dough feature now.

  • thecasbanks Apr 20, 2009

    same problem

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Remove the rubber washer that fits around the center post, split it into the two halves and glue a #31 O-ring (9/16ODx5/16IDx1/8) to the bottom washer. This worked on my pan on a TR2828 and are no longer available. It worked for mne so far.

Posted on Nov 01, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 368 Answers

Hi Donna,

Leaky seals typically require replacement, and yes, that sounds like what it is.

Plan A
I'd contact the manufacturer (Salton, Inc.) customerservice site for parts.

Go to

http://prc.prodregister.com/prodprotect/applica/

And click on "Breadman" (upper-right portion of the page), it redirects you to a secure webpage where you can register.

https://secure.prodregister.com/prodprotect/applica/bm.shtml

Part of the page reads:
"Call toll-free or visit our websites for assistance if you need more help.

Parts & Accessories:
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET)

Product Warranty:
Service: 1-800-231-9786 (Monday-Friday, 8:30 a.m. to 8:00 a.m., ET)"


Plan B
If Salton no longer supports that model, your best bet is contacting a vendor who specializes in selling aftermarket manuals and spare parts. The best one I've found is

http://www.breadmakerguru.com/

and no, I have no financial or other relationship with them (wish I did). There are other sources online as well, but I've been impressed with the selection that Breadmakerguru.com carries. If they don't carry the part, they may be able to find someone who does.

Plan C
Searching eBay or other online auction/sales site (yes, there are others besides eBay).

If I can be of further assistance, or if you have questions about any of my response(s), please let me know before rating me.

If this solves the issue, please rate it accordingly. My goal is to earn a "FixYa" rating from everyone I help.

Thanks for using Fixya.com,

Jon

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Paddle axle fell out the bottom on the pan while washing.


I looked through the manual for this unit and you need a more comprehensive parts drawing showing the drive details. They do not have this kind of detail on line, my advice is to contact them directly by phone.
http://cart.russellhobbs.com/consumer-services/warranty.aspx?sid=BreadmanUS

Nov 10, 2013 | Breadman TR2200C Ultimate Bread Maker

1 Answer

It is not mixing all the way. Nothing is jammed. 3 loaves now have not come out, because clearly it hasn't been mixed thoroughly, like it used to. No burning motor smell.


Hi and welcome to FixYa, I an Kelly.

This can be caused by a few things.
1. Check the bread kneading paddle(s). Make sure that it fits properly and is not slipping on the drive shaft. Also look for cracks in the paddle blade hub.

2. Check the bread pan coupler and drive pan bearings (link is a picture reference only of a USED part. http://cgi.ebay.com/Breadman-bread-machine-TR2200-Parts-Coupler-/200535459633?pt=Small_Kitchen_Appliances_US&hash=item2eb0d84731 (klunking sound usually noted if this part has failed)

3. Inside the bottom of the unit check the belt tensioner. (Picture reference only!)
http://cgi.ebay.com/Breadman-bread-machine-TR2200-Part-Belt-Tensioner-/200535465293?pt=Small_Kitchen_Appliances_US&hash=item2eb0d85d4d
Usually if there is a belt or tensioner problem you will note a lot of rubber pieces in the bottom of the unit.

Thanks for choosing FixYa,
Kelly

Feb 06, 2011 | Breadman TR2200C Ultimate Bread Maker

1 Answer

Hi, I had all my ingredients in the pan and was bringing it to the machine to begin making bread. When I noticed the liquid was leaking out from the bottom. I had a mess everywhere. Come to find out the...


Hi, The leaking is from the sealed bearing that the paddle shaft rotates on. It wears out over time. It can not be repaired and you will need a new bread pan. Sorry Hank

Nov 23, 2010 | Breadman TR2200C Ultimate Bread Maker

1 Answer

Sides of loaf caving in after removal from the pan.


Are you letting the bread cool thoroughly before removing from the pan? Also, sourdoughs tend to cave in as well. You could also have too much liquid in your mix - try reducing your liquid by a tbsp at a time. Too wet of dough will cave after baking.

May 15, 2009 | Breadman TR2200C Ultimate Bread Maker

2 Answers

Breadman TR2200C Ultimate Bread Maker pan leak


I was finally able to find a same size of heavy duty shaft seal from McMaster-Carr and installed on the pan with liquid weld after greased its inside. I put an extra washer on the shaft as well since the shaft itself was worn a little and wobbled . I needed a new snap ring to secure the spindle in place. Old one was rusted and disappeared.

Our bread machine is now back to work and we enjoy having a tasty bread every morning again.

Mar 26, 2009 | Breadman TR2200C Ultimate Bread Maker

1 Answer

Worn out bread pan


I had great success in finding what I wanted for my breadmaker at http://breadmakerpartsemporium.ioffer.com/. They have manuals and parts for most breadmakers at very reasonable prices.

Nov 15, 2008 | Breadman TR4000 Ultimate Dream Bread Maker

2 Answers

Breadman tr2500bc pan popping out


I read in a review that the pan can warp if you read instructions because it said to fist run the machine in quick bread mode to clear factory coating. Review said to run in quick bread mode with lid open so it doesn't overheat, heat warps the pan, so it pops out . However manuel never mentions to leave lid open. I just got one and hope they are right. I just ran it new no ingredients quick bread lid open...

Nov 15, 2008 | Breadman TR2200C Ultimate Bread Maker

Not finding what you are looking for?
Breadmakers Logo

Related Topics:

558 people viewed this question

Ask a Question

Usually answered in minutes!

Top Breadman Breadmakers Experts

Irene Tulloch

Level 2 Expert

434 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Breadman Breadmaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...