Question about Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver

1 Answer

Stinger stuck in chunck - Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Use a pipe wrench to give yourself a little added leverage.

Posted on Apr 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery stuck


I would remove, or at least loosen the housing screws that hold the saw together. I would guess that it overheated and may have melted the plastic if the battery is stuck in the saw.

May 05, 2014 | Dewalt Drills & Drill/Drivers

1 Answer

Bit stuck makita HR5210C How do I remove it.


Strip the chuck assy and see if you can pry the broken bit forward. If it is really stuck then the front Assy will need to be stripped.

Mar 12, 2014 | Drills & Drill/Drivers

1 Answer

Bit stuck in drill


OK, try to grab the chuck tightener and loosen by pressing lightly on the drill throttle button in whichever direction it takes to undo the stuck in drill bit.

I do this all the time.

Jul 13, 2010 | Ryobi 18v Variable Speed Impact Driver...

1 Answer

Bosch keyless chuck stuck


Make sure you try it in both directions.

Apr 18, 2010 | Black & Decker 3/8" Variable Speed...

1 Answer

Bit tighten stuck open


If you mean the chuck jaws seem stuck open, spray around them with some penetrating oil or spray like WD-40, RP-7 or similar and let sit for a couple hours... Then you can tap around the chuck body with a light hammer or spanner etc... just lightly tap... Then if the chuck has an arbor lock to prevcent it from spinning, be sure that is engaged then try to release the chuck jaws. Sounds like they are stuck open through tight friction or rusting on the inside edges (that you dont see). Be careful not to leave them in the fully open position when stored as this is exactly what can happen!

Mar 31, 2010 | Makita 6304LR 1/2" Chuck Electric Drills

1 Answer

Bit is stuck. chuck wont open. turns but makes a


the chuck is broken inside if clicking. Ace and True Value stores sell chuck replacements

Mar 04, 2010 | Black & Decker BD12PSK 12-Volt Smart...

1 Answer

Sds drill stuck in chuck


tap it lightly with a ball pin hammer, if that dosnt shake it out try opening it and useing something to push it through

May 04, 2009 | Drills & Drill/Drivers

2 Answers

Stuck chuck


open the chuck all the way, insde there may be a screw in the bottom it's lefthand thread turn it clockwise to remove, the chuck is also threaded, right hand thread. close the jaws on the short end of an allen wrench and strike the long end with a hammer to break it free

Apr 01, 2009 | Makita Usa Inc No.8390DWPE 18V Crdls...

1 Answer

Poder acuated tool, round getting stuck in chamber


Low priced (economy) shot will cause this problem. Also you may want to try cleaning the bore with a wire brush and some solvent as you would any other firearm. Let me know if this helps

Dec 05, 2008 | Drills & Drill/Drivers

Not finding what you are looking for?
Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Drills & Drill/Drivers Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Jim Thurston

Level 3 Expert

669 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Are you a Dewalt Drill and Drill/Driver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...