Question about Wireless Access Points

1 Answer

Thomson TG585 v7 Resets When Rebooted

Hi there,

I have a Thomson TG585 v7. I have set it up using my ISPs installation CD and then again directly using the IP address provided in the documentation.

The problem I have is that the unit resets itself everytime it is switched off then on again. Fortunately this has only occured twice due to a slowing connection, but we do have a lot of power cuts in winter. Besides, I can't believe that this is the way this unit rolls...

How do I insist on the unit holding on to mildly important scraps of information like WPA passwords etc please?

Many thanks

Posted by on

  • foxo14 Mar 11, 2009

    hiii guuyz i have the same router how i know if somebody is using my internet access or my wireless through my router??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 611 Answers

Once agian reset it then put in proper place you get it or do one thing press reset button after removing the power twice time then put on the power then re-cofigure it sir/madam

Posted on Mar 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost my cd for my wireless router so wat do i do its belkin 365 routero install it on my computer again and i need t


You only need the software to install a router if you are connected to it via a USB cable, otherwise you just need the network key (if there is any) to connect to it wireless or just plug in an Ethernet cable directly.
You can always go to the manufacturer's website to download the software.

Apr 30, 2011 | Belkin Wireless Access Points

1 Answer

I have set up this device as an AP and connected it to a adsl router, which also has another pc connected to it. I can connect my laptop to the AP and can even access the router, but am unable to browse...


Search in google about how to set up a DHCP server for your router and clone the modem's MAC address, most routers have this option, the thing is some ISPs limit the use of internet to only one machine, by cloning the modem's MAC address in your router you'll make the ISP believe there's only one machine connected to the Internet. By setting up a DHCP server in your router you'll use only one IP to connect all machines using a private network, that should solve your problems. Try both alternatives, and see which one works.
Please check the legal limitations of this procedure for your country or state and have a nice day! ;)

Apr 05, 2011 | ASUS WL-330GE 802.11b/g Wireless Access...

1 Answer

Dear sir iam los my cd softwarethomson tg585 v7


Hi sir there's another way of setting up this device. let me give you the user manual for this to help you set it up without the software.
http://www.google.com.ph/url?sa=t&source=web&cd=2&ved=0CCgQFjAB&url=http%3A%2F%2Fwww.technicolorbroadbandpartner.com%2Fgetfile.php%3Fid%3D7099&rct=j&q=thomson%20tg585&ei=gShdTY7lFoPMuAPLyLG2DQ&usg=AFQjCNGAmyw0UOCciGRezCfEcDhGW9kcVg

Feb 17, 2011 | Dell Wireless Access Points

1 Answer

Can't connect a wireless printer to a Thomson tg585v7. how do I check if DHCP function is active


That will depend on the printer and the router. Check the printer manual for ensuring the printer is set for DHCP already then if you don't have the router manual you will need to access the router settings and double check to make sure it is set for DHCP and that you have the correct Access key your using to access the wireless network.

Jun 17, 2010 | Wireless Access Points

1 Answer

Thomson tg 585 wireless multi user adsl2 GATEWAY


Hi, Did you manage to solve this. I have a similar problem. My thought would be to add belkinf5d7132 as range extender, but not sure if this works with thomson tg585. Regards

Dec 10, 2009 | Belkin (F5D7132) 802.11b/g Wireless Access...

1 Answer

802.11n problem.


Hi,
Please follow the mentioned step to check if the Wireless card is installed properly
Step 1 :
> click on start (assuming it to be a windows OS)
> right click on "my computer" and select "Properties"
> you will have the system Properties window pop-up
> under the Hardware tab, click on Device manager button
> under the device manager list look for network adapters
> you should now be able to see your wireless card under network adapter - check if the adapter is enabled ( if not kindly enable by right clicking on the adapter)
> once the adapter is active - it will have a green icon with not error on it.
> Now try to search for the network again - this should work..

Oct 17, 2009 | Belkin N1 Vision Wireless-N Wireless...

1 Answer

Can't get the wireless modem to work


I just looked at the manual and it states on page 5 that the setup CD requires Mac OS X 10.4 or 10.5.
Maybe that is causing your problem. (get the manual here.)

But in general you do not need a setup CD or any other fancy software. You can configure your router straight from the web browser. For the configuration I would always use a cable connection and not do it via wireless. (look at page 8 of the manual!)

When you go to 192.168.1.254 (or http://dsldevice.lan), did you log in? The default user is ‘Administrator’ and the default password is blank.
I read in another blog that someone had to log in with:

"The user name is: Administrator
and the password is the units serial number
CPxxxxxxxxx up to but EXCLUDING [ - the left square bracket".
---That sounds weird to me but maybe it helps.

Make sure Javascript is enabled in your browser!

Did this help? - If not, please come back and let me know

Mar 13, 2009 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

I was asked about the password


Hi rsmagdasoc,

Did you run the setup CD before? It might have been that you had change the password from there.

Sep 15, 2008 | Linksys Wireless-G WET54G 802.11g/b...

2 Answers

Connecting to sky broadband


In general the Wan port of the router gets connected to the modem (box supplied by your internet service provider or ISP) where the computer used to connect and the computer connects to the switch portion of the router which often has 4 or more ports. The router has configuration options that must be set to comply with your internet service providers (ISPs) requirements. These can often be found on his support web site. If you can provide the link to the website I can assist with the search. Otherwise I will need the name of the ISP. If this ISP is cable related like Road Runner I will need the associated cable provider. I will also may need to know the country, city and state in which you are located as some ISPs have geographic differences in equipment. Depending on what that information determines I may also need to know the Manufacturer and Model of the Modem -- probably the box supplied by your ISP. It would also be helpful to know if you got the router used or new. Used routers may have been configured by their previous owner and require additional changes to new routers with factory default settings.

All of the above information may lead to the determination that maybe we must enter a static IP address into the router, maybe we need to provide for PPPoE login for the router, maybe we need to configure the modem to allow the router to perform the PPPoE login, and several other such items. This is probably not a one reply solution.

To provide detailed information concerning that I will need to know the model number of your Belkin Router.

Dec 10, 2007 | Wireless Access Points

Not finding what you are looking for?
Wireless Access Points Logo

Related Topics:

1,090 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wireless Access Points Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

noti13

Level 1 Expert

15 Answers

Mike

Level 3 Expert

4331 Answers

Are you a Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...