Question about Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

On right side of my monitor 2 ,3 verticla lines or blinking.

Samsung 17" CRT monitor,
some(2,3) verticlak lines are displaying....they are blinking.........
and also my screen is sheking littile bit............

Posted by on

  • suresh_bomma Mar 03, 2009

    not a cpu or sound card problem.Have problem with monitor only.not sounds in monitor,only blinking are displying.give me a proper solution....


    Thanks...........

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 81 Answers

That sounds more like a graphic card problem than a monitor one. try conecting your pc to a different monitor and see if the problem persist.

Good luck

Posted on Mar 03, 2009

  • Marcelo Antelo Mar 03, 2009

    I don't think you understood the comment.

    It looks like your graphic card is the problem, not your monitor.

    If you connected your pc to a different monitor, you would be able to isolate the problem.


    Good luck.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Led bilinking


green LED blinking but no display, when disconect VGA cable from CPU than monitor displays cable disconected. CPU vedio card is ok

Jan 08, 2011 | Samsung 793S 17" CRT Monitor

1 Answer

Only horizontal line is displayed. if i knock the back side heavily proper display is coming.


The Samsung has an intermittent problem, the back of the set needs to be removed and main board flipped over, if you are handy with solder iron look for bad solder joints on the main board and start re-soldering the flybach pins, and the vertical section right near the flybach and any other connections that need attention.

Dec 28, 2010 | Samsung SyncMaster 753S 17" CRT Monitor

3 Answers

THE POWER LED (GREEN) IS BLINKING CONTINUOUSLY


LG 700E monitor's power LED blinking continueously and there is no display solutin ........

5_28_2012_9_36_17_am.jpg

May 30, 2009 | LG Flatron F700B 17" CRT Monitor

2 Answers

HCL 17" monitor display problem


Hi there ,
It seems that you have a vertical section problem ,It might be possible some capacitor might have gone wrong

Jan 24, 2009 | Samsung SyncMaster 753S 17" CRT Monitor

2 Answers

Green light continously blinking in samsung sync master 753s


1. cpu problem. why because of there is no signal output from cpu to monitor. the led blinking means there is no vertical, horizontal signals from cpu to monitor.

2. your monitor connected to another system.

3. neck board dry points.

4. cheak the display cable. 13&14 pins are horizontal, vertical signals.1, 2, 3 pins , R G B , 6 ,7, 8 pins R G B ground ( coaxiler cable used , meshed wire is ground )

Oct 13, 2008 | Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

Dispaly settings for samsung 794 MG 17" CRT


can u send me the wat is in the setting menu of your monitor?

Dec 16, 2007 | Samsung 793DF 17" CRT Monitor

1 Answer

No Display on connecting Data cable of PC


The Monitor is bad, with the CRT Monitors you cannot just replace the connections, because it is embedded into the CRT. So it is probably something that lies with in the monitor itself. Try to connect another monitor to the device. See what the result is, my best guest is the CRT Monitor when bad. Time to replace! Sorry!

Nov 23, 2007 | Samsung 793S 17" CRT Monitor

1 Answer

No diplay in Monitor


The blinking LED usually denotes that no signal is reaching the monitor. Do you have another monitor you can attach to the computer to test it? It sounds like it may be a computer problem, not a monitor problem.

Aug 28, 2007 | Samsung SyncMaster 793MB 17" CRT Monitor

Not finding what you are looking for?
Samsung SyncMaster 753S 17" CRT Monitor Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

kakima

Level 3 Expert

102366 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...