Question about Bulova Watch

2 Answers

Can't figure out how to deactivate the alarm on Umbro U564B watch

The instructions are generic for a watch with analog controls, besides they mention how to set the time but not how to activate and deactivate the alarm.

Most digital watches have you press one or two buttons at once to activate/deactivate the alarm. I've tried all the combinations of pressing one then another button, one button on it's own, and two buttons.

normally a symbol, a dot or a image of an alarm bell, etc. will light up to show the alarm is activated and when you deactivate the alarm it will dissapear.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Start with watch in normal clock mode. press and hold bottom right "lap reset" - alarm time appears. Keeping "lap reset" held, I can then toggle the alarm on and off using top right "start/stop".
Qiu: Circle segment lights up (only a black point in the middle, NO ALARM)
Circle segment with a black section on the above middle point, ALARM ON.

Posted on Aug 23, 2009

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have been struggling with a child's umbro watch. I have discovered that I can turn the alarm off permanently by the following steps.
Start with watch in normal clock mode. press and hold bottom right "lap reset" - alarm time appears. Keeping "lap reset" held, I can then toggle the alarm on and off using top right "start/stop". A circle segment lights up or turns off indicating whether the alarm is on or off. Not very clear, but seems to do the trick.

Posted on Apr 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I reuse 2 batteries for my Umbro chrono watch?


Normally the Umbro Chronograph watches having analog and digital clock works on single battery. When u put the battery inside ur digital is working fine but some times for analog hands do not move due to the loose button which is used to move the watch hands. So pull it out again and insert it agin gently till tick sound comes and u r good to go.

Let me know if ur watch is working successfully:)

Jan 27, 2017 | The Watches

1 Answer

Umbro watch instructions


Start with watch in normal clock mode. press and hold bottom right "lap reset" - alarm time appears. Keeping "lap reset" held, I can then toggle the alarm on and off using top right "start/stop".
Qiu:Circle segment lights up (only a black point in the middle, NO ALARM)
Circle segment with a black section on the above middle point, ALARM ON.

Jul 15, 2013 | Watches

1 Answer

Bought a generic clip watch from walmart with no manufacture's name on it. The back says MSP74582W batery CR1616 and then A126. Looking to find instructions on how to set alarm, date, and figure out...


Just got one, and haven't lost the instructions yet. First, the 4 buttons are:

S1 - at 4 - Lap/Rst
S2 - at 2 - St/Stp
S3 - at 8 - Mode
Light - at 10

Watch Control
Normal Display: Hour, Minute, Second
Push S1: Alarm time in Hours and Minutes
Push S2: Month, Date
S3: Change function

Alarm and Chime
In Normal Time Hold S1 and the alarm time will be displayed.
Press S2 once and Hourly chime will be on.
Press S2 twice and Alarm will be on.
Press S2 three times and Chime will be off.
Press S2 four times and Alarm will be off.
Press S1 and display will change to normal time immediately.

Setting Alarm Time
In normal time, hold S3 for about 3 seconds, the hour digit will flash and is advanced by pressing the S1 button. Then push the S2 button to change to minutes and change those by pressing the S1 button as above. Push S3 to return to normal time.

To silence the alarm, press S1.

May 15, 2011 | Watches

2 Answers

I have an Umbro Youths Black Strap Watch. How do i set the alarm to beep every hour?


Thank you for contacting FixYa.
You can find Bulova instructions here:
http://www.bulovaspecialmarkets.com/service/servicecenter.aspx
Jewel

Sep 13, 2010 | Bulova Watch

1 Answer

Casio Watch AMW-320R


first choose in which mode you need your watch to show you time, either in analog or digital, and that can be done by using the 2 side keys i hope

Jun 30, 2010 | Casio AMW320R 7EV Casual Sports Watch

2 Answers

Umbro youth watch instructions - my son has lost the instructions. In particular he has an alarm that goes off every hour and doesnt know how to stop it. But any instructions on how to use the watch would...


To obtain instruction, go to "boluva.com",
Select your region from the map.
Click on the Boluva picture.

Select "service center" from the menu at the top of the screen and a long list of operating instructions appears. Select yours and download.

Jan 20, 2010 | Bulova Watch

1 Answer

I lost instructions on how to disable alarm for UMbro digital watch u564b ..can you help?


go to the Boluva site and ask them via the "contact us" option.

Dec 27, 2009 | Bulova Watch

3 Answers

Setting a generic one-button digital watch


I too lost the instructions for my generic 4 button digital watch and had to find the functions by trial and error and the results are below.

=========================

beb6348.gif
Adjust Alarm/Time/Date - Press and hold Mode Button. When alarm displays, release. Start-Stop Button SELECTS, Lap-Reset Button ADJUSTS selection. Pressing the Mode Button again changes from Alarm to Time/Date, ADJUST as above. Pressing it again exits.

Select/Deselect Alarm, Hourly Chime or Both - Press and hold Lap-Reset Button, Start-Stop Button TOGGLES through the above options.

Select 12/24 Hour Mode - Press and hold Lap-Reset Button, Mode Button TOGGLES through the above options.

Select Stopwatch - Momentarily press the Mode Button, use the Start-Stop and Lap-Reset buttons to control.

Display Date - Press Start-Stop Button in normal time
display mode.


Display Alarm - Press and hold Lap-Reset Button in
normal time display mode.


Cancel Alarm - Press Lap-Reset Button in normal time
display mode to silence alarm.


Hope this is helpful,
George.

Nov 06, 2007 | Watches

Not finding what you are looking for?
Bulova Watch Logo

9,018 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bulova Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18377 Answers

Geoff

Level 2 Expert

66 Answers

Jimmy Accardi

Level 2 Expert

98 Answers

Are you a Bulova Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...