Question about Behringer Audio Players & Recorders

1 Answer

I bought a new behringer vmx1000. I can not get the microphone working.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

What microphone are you using, and also have you checked the cable is good? The gain knob on the mic channel is the only independent control for the mic level in relation to the music (without altering the masters). Also, you need the mic to be enabled on the channel, using the Mic On switch. Yours might be labelled On Air, Mic Live, etc.

Posted on Mar 05, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Behringer Eurorack UB2442FX - PRO mic inputs are intermittent

Check the type of microphones connected and set the proper settings,

and connect it to other mic inputs .

May 21, 2012 | Behringer EURORACK UB2442FX PRO Mixer

1 Answer

Hi I bought a Behringer C-1 Mic. And when I plug it into my xynyx 502, the LED of the C-1 open. But! my xynyx does not! receive any signal... Please help. did you think my C-1 is broke? because it was new...

That's a condenser microphone. Make sure you have on your phantom power. Should be a button or switch somewhere on the mixer ( individual channel or switch by power switch or in master section for +48v). All condenser mics require this.

Aug 26, 2011 | Behringer C-1 Microphone

1 Answer

I have just bought a behringer vmx 1000. I have a sony stack system can you tell me how to connect it up, e.t.c what cables go where. Thankyou

IAW its sparse manual which apparently assumes some hi-fi experience on the part of the user...

Register and download the manual for free at

Success will depend on your "stack" systems capabilities.

May 13, 2011 | Audio Players & Recorders

1 Answer

Hi. I bought a Behringer Dynamic Microphone XM8500 but I don't know how to install it. It's not working but probably because I'm doing something wrong. It's my first microphone. Do I need a mixer? Does the...

the type of mic input built into a pc (with a mini-jack socket) will not accept the output of a pro dynamic mic such as the one you have - it won't work correctly. You require a pre-amp or mixer - or what would be better for you would be an audio interface with a built in pre-amp such as this:

interface example.

Apr 21, 2011 | Behringer XM8500 Professional Microphone

2 Answers

My behringer c1u doesn't have a blue light. apparently it has no phantom power, and i just bought it. is it the usb ports? if so, please explain.

Answer from official Behringer support:
The green LED is fine. The newer units have green LEDs.

Please download and install asio 4 all from:

We hope that we have been able to help you with this information.

Feb 12, 2011 | Behringer C1U Microphone

1 Answer

Hi. I bought it new but it dosent work at all. Not even once. Please help me

Hi, It all depends on how you connected it. You can troubleshoot all connection.

After doing that, If still does not work,I would advice you take the microphone back to where you bought it from, and ask for replacement. Only if it has Guarantee for the mic.

Thanks for using fixya...

Nov 03, 2010 | Behringer XM8500 Professional Microphone

1 Answer

I have problem with c-1 cause it produce high noise... i have mic800 behringer processor... can you help me with functions of this processor ... what do i have to do to connect c-1 with mic800 so i could...

Go to this site: Scroll down the left side to manuals. You can get one in whatever language you are most comfortable with.Here is the place for your microphone: Your microphone needs phantom power which is a feature on the mic800. Just remember to use a good XLR balanced microphone cable or the phantom power won't work and you could damage something. Hope this helps.

Nov 28, 2009 | Behringer C-1 Microphone

1 Answer

Behringer B-1 Will Not Pick Up Anything

The microphone needs a phantom power supply to work. In your case you need a 48volt phantom power supply. Some mixers have this feature built in.The Micropower PS400 by Behringer would probably be a good choice.

Apr 19, 2009 | Behringer B-1 Professional Microphone

1 Answer

My microphone doesn't do it right.

Some of the Podcast mics are condenser mics and MUST be used with a preamp or DEVICE that supplies PHANTOM power to the mic.

You computer DOESN"T supply Phantom power.

Read up on Phantom power in Google to understand it.

Apr 03, 2009 | Behringer XM8500 Professional Microphone

Not finding what you are looking for?

Open Questions:

Audio Players & Recorders Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Audio Players & Recorders Experts


Level 3 Expert

4872 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Serge Lavallee

Level 2 Expert

67 Answers

Are you a Behringer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides