Question about D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE)

1 Answer

Router does'nt work . I can get online when I connect directly to the cable service and bypass the router, but when I plug the the ethernet cable into the router, I can't get wireless service.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Dear Werstellar,
Try resetting the router back into default, you can do that by holding the reset button on the back of your router for 30 seconds the uplug the power,
Once done connect a cable from a LAN port to your PC and connect the Ethernet cable from your modem to the WAN port of your DI-624.
Open your internet browser and type 192.168.0.1 the log into your router.
you can either run the wizard or go straight to manual configuration.
for manual configuration connection type : choose DHCP.
and then click on clone my Mac address. once this is done click save and reboot.
then log back to your router by typing 192.168.0.1 into your internet browser and go to wireless set up under encryption choose WPA as it is more secure and then type your network ID (This will be a password for your wireless network and it has to be a minimum of 8 DIgits or letters or a combination of both.
once done go to system from the menu and choose save and reboot.
Now unplug the power for both modem and router, then plug the power for your modem first wait few minutes until all the lights on your modem are up then power up your DI-624 give it few minutes and you should be able to go online on both wired and wireless connection.
any more help just ask

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to connect my all-in-one with my desktop-computer and router.


1.Your Modem you have with your ISP (Internet Service Provider) has an Ethernet cable coming from it
2.Plug the Ethernet cable into the Internet port of the router.
3.Unless your desktop computer has wifi capabilities (Wireless) your will want to plug an Ethernet cable directly from your Ethernet port of your computer to one of the 4 ports of your router.
4.This will allow you to connect 8 devices wireless around your home with your desktop computer Tethered (Hardwired to your router)

Mar 22, 2011 | Computers & Internet

1 Answer

It not let me get internet service i unplug it to move from one side of the room to the other and now its not working


You may need to reboot your cable modem before plugging in the router's power cord.

Are you certain that you re-plugged the Ethernet cable from the cable modem into the correct port on your Netgear router?

If plugging your computer directly into the cable modem allows you to go online, then just re-boot the router once all of the ethernet cables are plugged in to the correct places and then power it back on, and you should be okay.

Oct 17, 2010 | NetGear WGR614 Wireless Router

1 Answer

I have a d-link extreme g attached to a cable modem; the d-link is set for wirless. I can pick up the d-link on my ipod and laptop, however it only provides local access; no internet. I've tried everything...


I'm sure you have tried most of these steps but I'm going to list them any way so we have a complete picture of the trouble shooting process.

If your only getting local access that indicates that the router is broadcasting the wireless signal but unfortunately there is a connection issue between either the modem and router or the modem and the internet service provider. The first step is to verify that your modem is online with a good connection. If you have a working internet based phone than your in good shape. If not than you will need to research the light patterns of your modem or bypass the router to determine weather or not you have a connection to the ISP. The first step in trouble shooting a connection issue between the modem and router is to disconnect the Ethernet cable from the modem and the router than reconnect it. Make sure that the cable is connected to the correct ports. Next you will want to power cycle the computer, modem, and router. To do this you will need to shout down the computer and disconnect the power cables from both the modem and router. Allow all devices to remain off for 2 minutes. Plug the modem in first. Wait for the modem to establish a connection with the internet service provider(ISP). Depending on the type of modem this can take up to 5 minutes. After a connection to the ISP has been made reconnect the power to the router. Wait about another 2 minutes for the router to establish a connection with the modem then turn on the computers in the home. From this point you will need to retest.
If you still only have local access than there is a good chance there is an issue this either the Ethernet port on the modem or router. To trouble shoot the Ethernet port on the modem you can bypass the router and power cycle the modem and PC again. If the PC has no access wile directly connect to the modem than there is an issue with the modem and will need to be replaced. The good news is that most internet service providers will replace the modem for free. If all the trouble shooting steps above have failed than you will need to contact the router manufacture directly.

I hope that information above has helped is some way.
If possible please rate this solution.

Sep 01, 2010 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

Setting up xbox live


ARRIS modem is a phone/hsi modem. What youll need to do is first turn power off on xbox then unplug the power supply from the back of the Arris modem and unscrew the coaxil/cable wire from the back of the modem for about a minute. Then plug in the power cord to the modem wait another half minute then screw in the coaxil/cable wire....wait for the lights to come back on make sure the online light is solid green not flashing and follow the ethernet cable (Looks like a thick telephone wire) and make sure you have that ethernet cable seated/snapped into the ethernet port on your xbox. Then turn the xbox on and do connection test. FINISHED..IF it's still not working make sure you have Internet service from your provider and if using a router bypass it at first see if you can get onto xbox live without the router. If you can with just connected directly to your arris modem without the router involved. If you do want to use wireless contact your router manufacture and or xbox support at 800-469-9269.

Apr 24, 2010 | Arris Touchstone 450a (CM450) Modem

1 Answer

My router is hooked up correctly on my desktop and my laptop shows it is connected with a strong signal, but I still cannot get online, any suggestions


If you can't get online on either machine, plug your ethernet cable directly from your cable or dsl modem into your desktop. If it shows a network connection and you still can't get online, it may be a service provider problem. I am assuming that your service provider did not ship you a router, only a modem. Hooking up 2 routers on the same connection can be very tricky.

Jul 30, 2009 | Trendware TRENDnet 4-port Switch - 54 Mbps...

1 Answer

I have comcast cable net and D-link WBR 1310


Hi, forget about the USB connection since you wanted to use a router for your wireless connection. Contact Comcast asnd make sure they assist you in making your computer connect to the Internet using the ethernet connection because you are going to use the ethernet connection for the modem-router connection. Once your computer is online with the ethernet connection, you can connect your Dlink router to the modem and configure it for Internet connection. There will be more steps before you can use the wireless connection. Just make sure you can get online with ethernet connection first.

Jul 23, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Have the n+ wireless router/modem trying to connect via a cable to xbox live but keep gettin insufficient MTU even though the actual MTU of the router is higher than required


You may have to use trial and error to find the best MTU fit:

MTU Default of 1500 to 1492
Tart the setting the MTU @ 1400

MTU setting. Xbox LIVE requires a minimum MTU setting of 1364.
The information your console sends and receives is broken up into "packets" for transmission over your network. MTU is a setting that controls the size of these packets. If it's too small, you won't be able to connect to Xbox LIVE.
Top Solutions Try these solutions in order. If you give each one a shot and you still can't connect, contact Xbox Customer Support. Note that they will ask you try the suggestions on this page first.
Solution 1: Check your router MTU settings Xbox LIVE requires a minimum MTU setting of 1364. Usually, you can change your MTU setting from your router configuration web page, which is supplied by your router manufacturer.
Learn how to find and use your router configuration page
Look for the MTU setting on the router configuration page. When you find it, set it to Auto or 1364 (or higher), save your settings, and then try to connect to Xbox LIVE again on your console.

Solution 2: Connect directly to the modem If your router's MTU is set correctly, try bypassing it by connecting your console directly to the modem. This will help determine whether there's a problem with your router or something else on your network.
Note
This may require you to move your console to a location close to your modem. This is a temporary arrangement, meant only to troubleshoot your connection. If your console is connected wirelessly, you'll need an Ethernet cable for this step.
To connect your console directly to your modem (wired connection):
  1. Find the Ethernet cable that runs between your console and the router.
  2. Unplug the cable from the router, leaving it connected to the console.
  3. Find the Ethernet cable that runs between the router and the modem.
  4. Unplug the cable from the modem, and plug the cable from your console in its place.
To connect your console directly to your modem (wireless connection):
  1. Unplug the USB connector for your adapter from the console. The adapter can remain attached to the console.
  2. Plug an Ethernet cable into the Ethernet port on the back of the console.
  3. Find the Ethernet cable that runs between your router and the modem.
  4. Unplug the cable from the modem, and plug the cable from your console in its place.
Try to connect to Xbox LIVE again. If it works, there may be an issue with your router. Double-check the MTU setting in solution 1 above. Also confirm that you're using a compatible router, and make sure it has the latest updates from the manufacturer. If the problem persists, you may want to try a different router.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 06, 2009 | Belkin N1 Vision Router

1 Answer

Can.t connect to the internet using a wired connection..


If you're just pulling the ethernet cable off of the back of your computer, it won't work. You'll need a router connected to your network first, and then connect the 360 to the router with a second ethernet cable after setting up the router.

step by step.

1. connect the ethernet from the modem to the router.

2. connect the small ethernet that came with the router to the PC.

3. insert the cd that came with the router and follow the setup.

4. plug the 360 into the router with an ethernet cable into an empty port.

5. enjoy.

If you have a router already, you may just want to check the ethernet cable for any breaks. easy way of telling if it's the cable is to simply use a different cable, or use the cable for a different device, like your computer. change the cable out with a good one and see if you can still get online. If so, then your cable's not the issue.

If you have a router, good cables, and it's still not working, you may need to have the 360 looked at by a licensed repair service, because the ethernet jack on your 360 may have went out. This is rare, but it's possible.

Mar 01, 2009 | Microsoft Premium System for Xbox 360

1 Answer

My router is not working


More info please? Which lights are on on the router? What kind of Internet service do you have? Can you connect to Internet when you bypass the router and plug the Ethernet directly into your computer?

Jul 16, 2008 | NetGear WGT624 Wireless Router

Not finding what you are looking for?
D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE) Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Mike

Level 3 Expert

4334 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...