Question about Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

E22 error on Pixma MP210

A user here at school has a Canon Pixma MP210, that when turned on flashes E 2 2, dont know if its 22 or 2-2, i tried cleaning it, turning it off/on, using other USB cable, but whenever i turn it on the same error appears again, i would appreciate if anyone could help with this, i read on the site for someone with the same error so i would'nt double-post.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had this problem as well. After turning on, there'd eventually be a whirring noise followed up by a "CLUNK" noise, and then I'd get the e22 message. Took it down to a local printer place and the guy had a quick look.

- If you open up the printer so that the ink moves to the left, you should see the white plastic cleaning bed all the way to the right. The guy showed me how this thing can be snapped into an up and down position. Mine was stuck in an up position, therefore after the guy pushed it down everything was hunky dory.

Apparently it was cos the printer needs to do a cleaning cycle before it does anything else, so with the cleaning bed in the stuck position it couldn't do it. Hope this helps.

Posted on Jan 28, 2010

  • satyan Oct 28, 2012

    pl. take a snap of the white plastic cleaning bed all the way to the right which is to be put.in the down position.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

E22 Carriage error

Check whether cartridge is placed properly .
You get this error when cartridge is not detected properly .
Check the cartridge has ink in it .

Hope this helps .

Posted on Mar 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E22 error on Pixma MP160


It could be, if it leaked over the contacts, or dried up for lack of use, it could easily throw this error.

Jan 03, 2012 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

I have a canon mp210 that is flashing E 1 then 6. what does that mean ?


Error E1,6 means Ink has run out.

http://wwwflashing E 1 then 6.indiepowerpop.com/Canon MP210 Manuals/mp210_qsg_en-us_v1.pdf

navigate to this link, this the user manual of PIXMA MP210, where you can see meaning of errors and how to troubleshoot them.
thanks,

Nov 23, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Require anew copy of manual


Hi


You can view the manual for your printer from this link---

Canon Pixma mp210 printer User Manual Link 1

Alternatively you can download it from---

Canon Pixma mp210 printer User Manual Link 2


Daniel Scott

Jun 13, 2010 | Canon PIXMA MP210 InkJet Printer

1 Answer

Error code e22 flashing on display ever since we put in new ink from tesco


CANNON Printers ERROR CODE
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

might have to reset the waste ink this way :

  1. Start with printer off
  2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
  3. While holding the Power button, release the Resume Button.
  4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
  5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
  6. Turn off the printer and turn on again

Feb 18, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

For Canon mp210. Error light blinks. Either E22 or E2


Hi there
This is a Carriage error take a good look at the carriage that the inks are in and see if they are sitting ok and also do the next incise there some thing there stopping it from moving.


Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 07, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

ERROR E22 ON MY MP160 PRINTER


E22 = Carriage error
E42 22 = Scanner error

Aug 04, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

My canon MP210 gives E9 error. How does it solve?


Some of the error codes for your printer,

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

hope it helps

Jun 11, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

E3 flashing wat does it mean


E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD over current error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button
3 times for Orange EEPROM reset.


Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks


3 times Orange EEPROM reset

12 or more times Returns to a menu selection

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



May 01, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Error 22


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Jan 28, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Everytime I try to print Error 5100


Hi, Error E22 5100 is a carriage error. Check that nothing is stopping the cartridges from sliding back or fore acroos the silver bar inside the front of the printer.

Nov 05, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP210 Photo All-In-One Printer Logo

3,367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1812 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...