Question about Canon DR-5020 Path-Through Scanner

1 Answer

Canon Dr-5020 grabbing multiple pages

The scanner is sometimes grabbing 2 or 3 pages at a time when we are scanning.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 490 Answers

Wipe the rollers with a damp cloth thoroughly. Remove all the dust in the glass for a claen scan. The red color roller roller in the bottom needs thorough cleaning, rotate with hand gently (in power-off mode) and clean it thorughly. No solvents pls, except Isopropyl alcohol for cleaning
S. MOhan, Chennai, India

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a canon dr 5020 that just started scanning slowly


Check if there is enough disk space in the comp target area. Run defrag and scandisk.

S. Mohan, india

Mar 01, 2013 | Canon DR-5020 Path-Through Scanner

1 Answer

Can not install canon dr=5020 scanner/ installed scsi card then went to canon's site and downlaoded drivers for windows xp-computer asks to add hardward but does not find an "inf" file in the 6...


First ensure that the SCSI card is installed properly. Download DR 5020 drivers from http://software.canon-europe.com/products/0000672.asp and install them. Use CapturePerfect ver 2 or 3 to scan documents. With SCSI based scanners/devices, one should power-on SCSI device first before starting the Computer.
S. Mohan, Chennai, India

Feb 17, 2011 | Canon DR-5020 Path-Through Scanner

1 Answer

DR-5020 Path-Through Scanner: can't fing the drivers for the canon dr5020 scanne...


You can down load drivers from Canon Europe site. http://software.canon-europe.com/products/0000672.asp

S. Mohan

May 18, 2010 | Canon DR-5020 Path-Through Scanner

1 Answer

Canon dr 7580 is not scanning multiple pages.


Check if you have selected 'multipage' option. Then you will get only a single file, but with multiple pages.
If your question is that the second or subsequent pages are not pulled in for scanning, then you need to change the rubber rollers.
S. Mohan

Sep 30, 2009 | Canon DR-7580

1 Answer

We recently acquired a Canon DR 9080C Scanner and purchases and installed a SCSI card in an older HP Pavillion. The scanner works fine using the USB port, but when using the SCSI port I get an error when...


CapturePerfect ver 3 is on chargeable basis! You can download ver 2.0 from http://software.canon-europe.com/software/0022439.asp?model= Though this is listed under Canon DR 5020, it works fine with DR 9080C. DR 9080C has very intelligent features and ver 2 works fine. I do not know if there are addl features with ver 3.0. I have used for scanning over 500,000 docs.
S. Mohan

Aug 05, 2009 | Canon DR-9080C Path-Through Scanner

1 Answer

Scanner is not reading multiple pages...


Check your scanning software settings. If you are getting only one file output, then you must have chosen 'multipage' option.
S. Mohan

Jun 12, 2009 | Canon DR-2580C Path-Through Scanner

1 Answer

Dr-2580C Grabs more than one page at a time!! Losing Info!


If the rollers are old, you need to change it, else clean with a damp cloth. Dont use solvents. Ensure the papers are not sticky, loosen them if required.
S. Mohan

Mar 31, 2009 | Canon DR-2580C Path-Through Scanner

1 Answer

Canon DR-2080c - Replacing rollers


Check for a switch on the scanner that is made to feed single pages or multiple pages. If it is on single page it can multi jam all the time.
As far as the rollers go there is a pick up roller, separation roller, and a feed roller. You can clean them with rubbing alcohol to see if its indeed the tires that are bad. The exchange kit has all three tires in it that are user replaceable.

Jan 25, 2009 | Canon DR 2080C Path-Through Scanner

1 Answer

Canon Dr-5010C Scanner to Pc problems.


Are other formats, like JPG, working okay? Unselect multiple pages so that you get on image per sheet. Reinstall scanning software after a 'scandisk' command.

S. Mohan

Mar 04, 2007 | Canon DR-5010C Path-Through Scanner

Not finding what you are looking for?
Canon DR-5020 Path-Through Scanner Logo

Related Topics:

461 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Scanners Experts

D. E. Hev

Level 3 Expert

1059 Answers

Mohan Sriraman
Mohan Sriraman

Level 2 Expert

490 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Canon Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...