Question about Fuji Zoom Date 60 35mm Point and Shoot Camera

1 Answer

How to clear the internal memory from a finepix F 480

Although the iages have been downloaded & the camera has been cleared
it will only allow me to take 6 pictures before asking me to insert a new card

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can anyone help me my photos have been saved on to my intenal memory of a finepix480 camera when i go to copy them back on to the card it says no card when the card is already in what can i do to get them back

Posted on Jul 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. A friend gave me a weathermatic dual 35 camera and said that it may need some work. I replaced the aaa batteries and turned it on, the lens moves, the red light comes on but it will not take a photo....


Your camera very likely has a lens error, this is such a common fault that I hope you don't mind me pasting my stock generic answer below. No point in reinventing the wheel!

Stuck lenses are probably the most common reason that compact digital cameras get thrown away, but there's a fair chance of recovering use of your camera again

The fault is commonly caused by dirt or grit blocking the mechanism, or due to it having suffered a recent fall. Another common cause is that the camera was in a pocket or bag and the power button accidentally activated and tried to open the lens against resistance. The mechanism may have simply become dislodged or there may be parts which have broken.

If your camera is still under warranty and has definitely not been subject to misuse then contact the manufacturer's service department in your country to find out about a free repair [EDIT: this option definitely will not apply to your camera as it's too old and Minolta no longer exist]. If the warranty has expired though a professional repair will far exceed the cost of replacing your camera. You will therefore have nothing to lose by trying to fix this yourself.

Please click here and you will be taken to an excellent article provided by the Camera Repair website. For the most part, you'll be guided on how to physically manipulate your camera to try and clear the fault. Although the article mentions Canon a few times, the advice applies equally to all cameras with lens errors and is not model-specific.

If the link doesn't work then cut and paste the following address into your browser:-

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Good luck, I hope you manage to use this information to fix your camera, or at least are able to use the information to help decide whether to buy another camera. If you do decide that you have to throw your camera away then don't forget to remove the battery as it can be used in other devices. Please take a moment to rate the free answer I have provided for you.

Jun 15, 2011 | Minolta Vectis Weathermatic Dual 35mm...

1 Answer

Just need a manual foor Nikon One.Touch Zoom 90s


Description: Sleek and stylish, the exciting new Nikon One-Touch Zoom 90QD offers real zoom power in a lightweight, easy-to-use design. The One-Touch Zoom 90QD has a sharp, clear, 2.5x zoom lens with a 38-90mm range and a macro mode for shots as close as 11 inches. The One-Touch Zoom 90QD features a built-in automatic flash with five versatile modes (auto flash, anytime flash, flash cancel, slow sync and red-eye reduction). The active infrared autofocus, infinity focus (for landscapes and faraway subjects), real-image zoom viewfinder and fully automatic exposure control all help to ensure clear and balanced photos.

7444ca6.jpg Depth 2.1 in. Film Type 35mm Width 4.6 in. Height 2.5 in. UPC 018208018789 Battery Type 1 x 3V Lithium Battery (CR-2) Weight 7.84 oz. Self Timer Yes Camera Type Point and Shoot Focus Type Autofocus Minimum Focus Distance 1 ft. ISO Range - Automatic Setting ISO 100 - 800 Red Eye Reduction With Red Eye Reduction Zoom Size 2.4 Auto Exposure Yes Min Aperture f10.5 Waterproof No Max Aperture f4.8 Zoom Lens With Zoom Lens Zoom Range 38 mm - 90 mm

User Manual can not be found up to now. Very soon will be available.

Jan 26, 2010 | Nikon One Touch Zoom 90S 35mm Point and...

1 Answer

I am having CANON Camera SURE SHOT 80 Tele. Whenever i start camera there is one msg which only shows H and stop working further. What can i do now..


There are two conditions under which a blinking "H" will appear in the
LCD panel: (1) when the film has been loaded incorrectly or (2) when the
camera's self-test process detects an internal malfunction. If a
blinking "H" indication appears, perform the following operations in
attempt to resolve the situation:

1. Rewind and remove the film using the rewind button, then remove the
battery to clear the memory.

2. Clean the contacts at the base of the battery compartment with a
clean pencil eraser to ensure proper contact between the camera and
battery.

3. Replace the battery, power the camera back up and operate it as if
it had film loaded, pressing the shutter release.

If the "H" display stops blinking, the problem is corrected and you can
continue using the camera normally. If the blinking does not stop, or
if it subsequently returns, the camera should be examined by an
authorized Canon service facility.

For factory service, please forward your camera to the Factory Service
Center shown below. When shipping your camera, please be sure to remove
the film (if possible) and batteries. You are not required to send any
accessories or manuals when shipping the camera. Be sure to include
your name, street address (no P.O. boxes, please), telephone number, and
a letter describing the issue with the product. If it has been less
than one year since the camera was purchased, we ask that you also
include proof of warranty in the form of a copy of your sales receipt.

As we do not provide RMA numbers for service, we suggest using a
traceable and insurable service (i.e. UPS, Federal Express, Priority
Mail) to ship your camera. Please package the camera very securely in a
sturdy shipping box to prevent damage during shipment.

Please send your camera to the following Factory Service Center:

Canon Factory Service
1440 Chase Ave.
Elk Grove Village, IL 60007

Telephone: (800) 828-4040
Business Hours: Monday - Friday 8:00 a.m. - 12:00 midnight ET, and
Saturday 10:00 a.m. - 8:00 p.m. ET (excluding holidays)

Upon arrival at the Factory Service Center, your camera will be logged
in to our repair database and assigned a repair number. Next, the
camera will be examined and you will be advised of the findings. If the
required repairs are covered by the warranty, the repairs will begin
immediately. When the repairs are complete, the camera will be shipped
back to you via Federal Express or UPS.

The length of time for the repair will be dependent upon the nature of
the repair and availability of parts, if needed. Usually, warranted
repairs are completed within approximately ten to fourteen business days
of the camera's arrival at the Factory Service Center. Please be
assured that your camera will be returned as soon as possible. We
appreciate your patience and understanding in this matter.

All decisions regarding warranty coverage are made by the Factory
Service Center at the time of repair. If the repair entails something
that is not covered in warranty, or if the camera is out of warranty, a
written estimate will be sent to you at the address that you have
provided. The repairs to your camera will not begin until you approve
this estimate and make payment arrangements. If, after receiving the
estimate, you do not wish to have the camera repaired, please inform the
Factory Service Center of your decision as soon as possible. If you
decline the estimate, the camera will be shipped back to you
un-repaired.

Once you have confirmed with your shipper that the camera has been
delivered, you are more than welcome to contact us for repair updates.
Please include your name, address, and telephone number, as well as the
serial number of the camera, in all repair status inquiries. If you
prefer to contact us by phone, please see the above contact information.

Please note that our U.S. Factory Service Centers are unable to accept
packages from or return equipment to addresses outside the United
States.


Please rate our help to keep the FREE service online++++Thanks for using FIXYA

Sep 15, 2009 | Canon Sure Shot 80 Tele/Date 35mm Point...

1 Answer

Pentax K2 Shutter and mirror problem


Without a stripdown it's not possible to give a definitive answer. Clearly the mechnical interlock which prevents the shutter from firing until the mirror is out of the way is not functioning correctly, but pressing the dof button overcomes this.

It's possible that something has broken or worn internally, but far more likely that old dried camera grease coupled with decomposing gooey foam bumpers and light seals has gummed up the workings.

Now that film SLR's are ten a penny and often free on FreeCycle it's certainly makes no economical sense to repair this camera. But it's a real classic and a delight to use so it's worth sending to a professional repair shop for a thorough service just as you would with a classic car or motorbike.

Jun 03, 2009 | Pentax K2 Film Camera

1 Answer

Replacement battery


takes 2 AA batteries, if this is a vivitar camera, ordinary one not lithium

hope this helps

Aug 08, 2008 | Vivitar 450PZ 35mm Point and Shoot Camera

1 Answer

Camera goes into Shut Down Mode & Flashes the Letter H


Hey sonax,
This H error message means either the film is loaded incorrectly, or there is an internal malfunction in the camera. To determine if the film is loaded incorrectly you should take the film and the batteries out of the camera then reinstall the batteries and try taking a picture without film in the camera. If the camera allows it then the film was loaded incorrectly and I would refer to the camera manual for directions on how to load the film correctly. If the H error message persists then there is most likely an internal malfunction and I would have the camera looked at by an authorized service technician. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.

Jul 23, 2008 | Canon Sure Shot 65 35mm Point and Shoot...

1 Answer

Pentax espio 140


subaru662,
can you see the lens in the finder move when you zoom out? if not ,the finder lens is stuck.
if it does move when zooming, see if you have a diopter adjustment wheel or sliding knob near the front lens of the finder. if so adjust the lens to your eye.

Jun 28, 2008 | Pentax Espio 140V 35mm Point and Shoot...

1 Answer

Instructions


There are two conditions under which a blinking "H" will appear in the
LCD panel: (1) when the film has been loaded incorrectly or (2) when the
camera's self-test process detects an internal malfunction. If a
blinking "H" indication appears, perform the following operations in
attempt to resolve the situation:

1. Rewind and remove the film using the rewind button, then remove the
battery to clear the memory.

2. Clean the contacts at the base of the battery compartment with a
clean pencil eraser to ensure proper contact between the camera and
battery.

3. Replace the battery, power the camera back up1.gif and operate it as if
it had film loaded, pressing the shutter release.

Jan 11, 2008 | Canon Sure Shot 105 Zoom Date 35mm Point...

1 Answer

Fer


I received this information from Canon Tech Support--- There are two conditions under which a blinking "H" will appear in the LCD panel: (1) when the film has been loaded incorrectly or (2) when the camera's self-test process detects an internal malfunction. If a blinking "H" indication appears, perform the following operations in attempt to resolve the situation: 1. Rewind and remove the film using the rewind button, then remove the battery to clear the memory. 2. Clean the contacts at the base of the battery compartment with a clean pencil eraser to ensure proper contact between the camera and battery. 3. Replace the battery, power the camera back up and operate it as if it had film loaded, pressing the shutter release. If the "H" display stops blinking, the problem is corrected and you can continue using the camera normally. If the blinking does not stop, or if it subsequently returns, the camera should be examined by an authorized Canon service facility. For factory service, please forward your camera to the Factory Service Center shown below. When shipping your camera, please be sure to remove the film (if possible) and batteries. You are not required to send any accessories or manuals when shipping the camera. Be sure to include your name, street address (no P.O. boxes, please), telephone number, and a letter describing the issue with the product. If it has been less than one year since the camera was purchased, we ask that you also include proof of warranty in the form of a copy of your sales receipt. As we do not provide RMA numbers for service, we suggest using a traceable and insurable service (i.e. UPS, Federal Express, Priority Mail) to ship your camera. Please package the camera very securely in a sturdy shipping box to prevent damage during shipment. Please send your camera to the following Factory Service Center: Canon Factory Service 1440 Chase Ave. Elk Grove Village, IL 60007 Telephone: (800) 828-4040 Business Hours: Monday - Friday 8:00 a.m. - 12:00 midnight ET, and Saturday 10:00 a.m. - 8:00 p.m. ET (excluding holidays) Upon arrival at the Factory Service Center, your camera will be logged in to our repair database and assigned a repair number. Next, the camera will be examined and you will be advised of the findings. If the required repairs are covered by the warranty, the repairs will begin immediately. When the repairs are complete, the camera will be shipped back to you via Federal Express or UPS. The length of time for the repair will be dependent upon the nature of the repair and availability of parts, if needed. Usually, warranted repairs are completed within approximately ten to fourteen business days of the camera's arrival at the Factory Service Center. Please be assured that your camera will be returned as soon as possible. We appreciate your patience and understanding in this matter. All decisions regarding warranty coverage are made by the Factory Service Center at the time of repair. If the repair entails something that is not covered in warranty, or if the camera is out of warranty, a written estimate will be sent to you at the address that you have provided. The repairs to your camera will not begin until you approve this estimate and make payment arrangements. If, after receiving the estimate, you do not wish to have the camera repaired, please inform the Factory Service Center of your decision as soon as possible. If you decline the estimate, the camera will be shipped back to you un-repaired. Once you have confirmed with your shipper that the camera has been delivered, you are more than welcome to contact us for repair updates. Please include your name, address, and telephone number, as well as the serial number of the camera, in all repair status inquiries. If you prefer to contact us by phone, please see the above contact information. Please note that our U.S. Factory Service Centers are unable to accept packages from or return equipment to addresses outside the United States. We hope this information is helpful to you. Please let us know if we can be of any further assistance with your Sure Shot Z155.

Mar 13, 2007 | Canon Sure Shot Z155 Caption 35mm Point...

Not finding what you are looking for?
Fuji Zoom Date 60 35mm Point and Shoot Camera Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Point and Shoot Film Cameras Experts

kakima

Level 3 Expert

96518 Answers

pictureman4u

Level 2 Expert

126 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Are you a Fuji Point and Shoot Film Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...