Question about Washing Machines

1 Answer

Bs fdgsdfgdsfgsdfg fdsg sdfg dsfg - Washing Machines

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The F51 error code indicates that the control is not sensing proper motor movement through the signals from the RPS (rotor position sensor) circuit. This can be caused by several different problems. Make sure that you are not overloading the washer. Overloading can cause this problem. A toy or foreign object could be under the washer that is interfering with motor rotation. With the washer empty, spin the basket inside the washer tub to see if it spins relatively easily. If not, you could an item caught between the spin basket and the tub. You could have a wire harness problem causing signals to not be transmitted properly between the RPS and the machine control board. A failed RPS sensor or a failed control board could also cause this problem.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!

Posted on Sep 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I AM HAVING A LG BS-50 WASHING MACHINE IT IS NOT WORKING PLEASE SEND ME MANUAL AND ELE. WIRING DIGRAM ALSO.....


Hi from retired Englishman in SW France,
Sorry, this forum is not able to supply any type of manual, installation instructions, electrical or schematic diagrams direct; it's just made up of ordinary guys and gals, probably at home and from all over the world, with experience of addressing problems and giving guidance for free on the web ;-0)
Also members on Fixya are not 'affiliated' to, or representative of, any manufacturer at all, just using their experience gained probably over many years.
Manual
You will need to type into your search engine/web browser '(make model number) washer technical manual' and you may be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct but they often only supply to their registered engineers ;-0(
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Jul 11, 2011 | LG Washing Machines

2 Answers

Gasket seems to have pulled away from "drum" side;


Front loaders are known for building up mold and the smell.
It's caused by using liquid detergent which is made from animal fat. Use powder. And use the minimum amount.
It's caused by using fabric softener. Dilute it 50/50 with water.
It's caused by the water remaining in the tub between washes. Leave the door open to allow it to dry. .
Pull the rubber door seal back and clean the mold off .
Affresh is recommended by some manufacturers. You run it through a wash cycle with it.

Jan 25, 2011 | LG WM-2277HW Front Load Washer

1 Answer

Water dispenser does not dispense water. the ice dispense is working. But any ideas would be appreciated and i am not the best fix-er-upper but can understand easy and simple steps.your help full idea...


behind your crispers is a water tank or a coil of water tube. water stays in there until you call for water. that is y u have cold water at the door. i have seen the tank freeze up at times. u could raise the temp in your frige a few degrees and wait for a week or so to see if it fixes its self. next-- the water valve in back could be bad. it is a duel system ice maker has its own valve. to test this you can disconnect the line where it goes into the bottom of the door and press the button to call for water. have a cup ready.if water comes out there then your line inside the door has frozen. if thats the case call the manufacture because there might be a recall on that model. i have seen that on some GE'S. good luck----RON

Dec 10, 2009 | Washing Machines

1 Answer

How do you run cleaning cycle


dont bother its a bs cycle
the best way to clean your machine is a cold cycle with 1 cup white vinager

Oct 04, 2009 | Washing Machines

1 Answer

Water not hot on hot temperature setting


BS ....on the back inside the washer are two solenoid operated valves that control the hot and cold water flow. your hot valve has ceased to function...and needs replacement.  also make sure your hot water valve is open fully and that the screen inside it isn't clogged.

Mar 29, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Severe vibration during spin cycle


reduce the amount of cloth and make sure the cloth don't fix in one corner

Mar 23, 2009 | LG WM-2277HW Front Load Washer

2 Answers

Hot water not really hot


I have never heard of this before, and have always piped dishwashers off the hot water line. Not to say it could not be done the other way, I would refer to the instructions that came with the dishwasher, and if they say to connect to the hot water line, to have the technician come back and fix it. If it says to connect to cold water line, then manufacturers know best.....Hope this helps

Dec 29, 2008 | GE WPRB9220D Top Load Washer

2 Answers

Lock


He's talking BS, get another opinion.

Oct 06, 2007 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...