Question about Funai TruTech DVDVCR Dual Recorder

Open Question

DVD won't finalize

I've recorded nearly two hours using the Funai SV2000 dvd recorder. I have repeatedly pressed SETUP to bring up the menu however it won't bring it up. Therefore I can't get to disc edit and finalizing.
I can edit individual titles but that is all.

Posted by on

  • Anonymous Apr 01, 2009

    I am having the same problem. I found how to get to the finalize disc option but I am getting an error code.You have to trick it to get it to come up.With your disc in : push the eject button.While the tray is open push setup on your remote then close the tray with the close button on the remote.While the disc is loading press setup again and wait, the disc edit option will become available.Now scroll down to disc edit , push ok,select finalize, push ok ,select yes, push ok. This should finalize the disc...hope you have better luck than I did.

×

3 Suggested Answers

Mike Adams
  • 19 Answers

SOURCE: FUNAI WV20V6 VCR-DVD

Arakawastore. As usual you'll need to register a username and password to logon with if you want to actually download the service manual. But you can see everything you want to know about it by clicking on the hotlink below without having to register beforehand.

If you're hoping to find it online for free all you'll do is waste vast amounts of time. If I had it in my PDF service library I'd gladly have provided you with it, just as I've done on numerous occasions before here on Fixya.

Not once has a single Fixya member ever bothered to acknowledge my having done so as you can tell by my huge 3 point ranking. Perhaps this best accounts for why we all still have to pay for them.

Funai SV2000 WV20V6 Service Manual (PDF 6.20mb) <--- click here for full info

mikeadams110@yahoo.com

Posted on Jan 06, 2009

  • 416 Answers

SOURCE: I need a owners manual

Please go to this link
http://www.funai.us/funai/support/index.html
Follow to Owners Manual and type your model
This the link for PDF for model wv20v6
http://www.funai-corp.com/6pdf/om/WV20V6.pdf
I just check it works
Good Luck

Posted on Feb 09, 2009

  • 9 Answers

SOURCE: I need "funai SV2000 dvd Recorder Operating

http://www.funai-corp.com/6pdf/om/WV10D6.pdf

Posted on May 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost manual for DVD Recorder/VCR ZV450MW8 Need instructions to copy DVD Disk to VDD Disk or e-mail manual


To dub a DVD, first press Setup on the remote. Then select Recording (use the Up/Down arrows and then press OK). Navigate to and select Dubbing Mode. Select the direction for the duplication. Then press Setup to leave the Setup menu. Then press DVD to ensure that the unit is ready to play the DVD. (Press VCR if you are dubbing a video tape.) Then Press Play to advance to the section that you wish to duplicate, if needed, and then press Pause. (Press Pause a bit early; the dubbing process will lose about 5 seconds.) Now, press the other Mode button (VCR if recording to tape, DVD if recording to DVD). Next press D.Dubbing on the recorder or the remote. (The button is to the right of the Channel Up/Down buttons on the recorder. It's near the bottom left on the remote.) Press Stop when the section to be duplicated has been played in its entirety.

The Magnavox ZV450MW8 was manufactured by Funai with the Magnavox name. Thus Funai Service has the manual available: http://www.funaiservice.com/manual2012_search2.php . The direct link is http://www.funaiservice.com/manuals/MAGNAVOX/ZV450MW8/ZV450MW8.pdf . The directions for dubbing a DVD to VCR or vice versa start on page 48. Note: copy protected items cannot be duplicated.

I hope this helps.

Cindy Wells

Dec 10, 2014 | Televison & Video

1 Answer

I need a manual for my sv2000 dvd recorder, it was not in the box.


The manual for the SV2000 dvd recorder can be found at
http://www.funai-corp.com/6pdf/om/WV10D6.pdf

You can view the manual online or download to your computer for future reference.

Feb 05, 2011 | Funai FDR90E DVD Recorder

2 Answers

I cannot play burned dvd's from this system in other dvd players becahse I cannot finalize the dvd. How do I finalize?


The recording may have used all the media on the disk because you let it run until it was full.
Now, there is no room to finalize the disk.

Play this back on the machine where it was recorded while recording it to another DVD recorder..
This time, BE THERE to stop the recording.
Set the recorder to a speed that leaves at least 10 minutes extra space for finalization.

Jan 31, 2011 | Pioneer DVR-RT500 DVD Recorder/VCR

1 Answer

EWR20V4 How do I finalize a disc after it's recorded ?


For the EWR20V4, press Setup on the remote then select the Disc menu (with the left/right arrows) and press enter. Select Finalize (using the up/down arrows) and press enter. A confirmation window will pop up, select Yes (left/right arrows) and press enter. Note: finalization takes some space on the DVD so leave room after recording to the disc. The step will take a few minutes. Finalization is permanent except for -RW discs (rewritable) and can only be undone with same unit that finalized the dvd-rw.

The DVD recorder was made by Funai Corp for Emerson. The manual for the unit can be found here: http://www.funai-corp.com/support/manuals.aspx . I found searching for products starting EWR gave several similar models. The direct link is http://www.funai-corp.com/6pdf/om/EWR20V4.pdf .

I hope this helps.

Cindy Wells

Jan 06, 2011 | Emerson EWR20V4 DVD Recorder/VCR

1 Answer

IS THERE A CODE TO SET MY FUNIA SV2000 DVD RECORDER TO WORK WITH MY DIRECT TV REMOTE


Remotes are set to the DVD recorder in the REMOTE. It is difficult to control a DVD recorder with a universal remote except for basic functions. The remote manual needs to list the DVD Recorder or a similar Funai model to control it. Try different Funai codes from your remote book. One might work for minimal stop, play, pause, etc.

Mar 20, 2010 | Funai PY90DG DVD Recorder

2 Answers

Need manual for Funai SV2000 Model#WV20V6


Visit www.funai-corp.com and under manual type your model to download pdf.

Jan 06, 2009 | Funai TruTech DVDVCR Dual Recorder

1 Answer

Sv2000 dvd recorder only


go into setup set input to ch 3

Nov 01, 2008 | Funai TruTech DVDVCR Dual Recorder

3 Answers

Recorded DVD wont play on any other DVD Player


I lost my manual. Can you describe how to finalize it? I can't finad any buttons to press that say finalize on them.

Jun 01, 2008 | Funai TruTech DVDVCR Dual Recorder

3 Answers

How to finalize


i have spent 2 months looking for this answer myself... and at last success! i downloaded the user manual from funai(they made this model) available here: http://www.funai-corp.com/6pdf/om/MWR10D6.pdf on page 38 it instructs you to press setup on your remote, from the drop down menu you need to select disc edit and then select finalize. this aggravated me at first because nothing happens when i hit the setup button, i powered off the unit and hit setup before the disc loaded. this step is not mentioned but is necesary. you cannot finalize a disc after it has loaded to the title menu.

Jul 25, 2007 | Philips Magnavox MWR10D6 DVD Recorder

Not finding what you are looking for?
Funai TruTech DVDVCR Dual Recorder Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Funai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69664 Answers

Cindy Wells

Level 3 Expert

4800 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Funai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...