Question about Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher

1 Answer

No Water in. Will not change wash cycles

When I press the "start/cancel" button the following indicators appear:
Start/Cancel, Extra Rinse, Sanatize, Heated Dry, and Normal Wash.
I press the "start/cancel" button again and I hear a motor running and all indicator lights are out except the Start/Cancel.
The unit also is not taking in any water.
I don't have a service manual for this dishwasher. Any Ideas?
Jim

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There was soap particles caught under the float valve. Thanks.
Jim

Posted on Mar 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code in digital display does not have a E in front of it


Please let me know if you can get a number after this - if so what number shows up?


Model differences:
• Better models have a digital readout display
• Good models do not have a digital readout display
In the Better Models line, the failure codes will appear in the display as an E followed by two numbers, a number and a letter
or two letters. The control will beep and the Door Lock, Wash, Rinse, Final Spin and Control indicator lights will flash.
Example: E14. To stop the flashing and beeping, the customer may touch the Pause Cancel button. The error code remains
stored in the control but once the problem is corrected, it does not effect the operation of the washer. If the failure is something
that the customer can correct (such as the water faucets being turned off), the washer will operate normally the next time it is
started.
In the Good Models line, the control signals the failure code by flashing the five indicator lights of Door Lock, Wash, Rinse,
Final Spin and Control for the first number or letter after the E and the Start indicator light for the second number or letter
after the E. When a failure occurs, the washer stops or pauses and the control beeps and flashes the five indicator lights to tell
the customer that a failure has occurred. To stop the flashing and beeping, the customer may touch the Pause Cancel button.
The error code remains stored in the control but once the problem is corrected, it does not effect the operation of the washer.
If the failure is something that the customer can correct (such as the water faucets being turned off), the washer will operate
normally the next time it is started.
To recall an error code,
• Wake the machine by pressing any button
• Wait 5 seconds
• Press and hold the Start and Pause Cancel buttons simultaneously
• All LEDs will go blank and after a few seconds the control will signal the stored code using audible beeps and blinking
LEDs. The control will repeatedly signal the code, as long as the Start and Pause Cancel buttons are pressed.
A two-second pause between repeats affords you the ability to make accurate counts to identify the correct error codes.
Please Note the following...... on a small number of washers with serial number prefix XC4,
if the previous procedure does not perform as specified, follow the option below:
• Follow all previous steps but instead of pressing Start and Pause Cancel buttons,
press and hold Options and Pause Cancel buttons.
If the washer is a Better Model, the error code will appear in the display. Troubleshoot problem by using charts on the
following pages.
If the washer is a Good Model, the five indicator lights of Door Lock, Wash, Rinse, Final Spin and Control will flash the
number of times for the first digit of the code and the Start indicator light will flash the number of times for the second digit.
Take
separate counts of each indicator light, then repeat to confirm in order to be accurate in identifying the proper error code.
The code is obtained by counting the number of times the lights flash. Example E24: The five indicator lights would flash twice
indicating the 2 and the START indicator light will flash four times indicating the 4. The five indicator lights and the START
indicator light start flashing at the same time.
The control will pause for 2 seconds, then repeat the code as long as the two buttons are pressed and held.
Note: A letter appearing in the code stands for a number higher than nine:
A = 10 B = 11 C = 12 D = 13 E = 14 F = 15
Example Code F1: the first digit would be 15 and the second digit would be 1. If this code would appear on a washer in the
Good model line, the five indicator lights would blink fifteen times and the START indicator light would blink once.

May 13, 2014 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Door wont open and F34 error message on our axxis front loader


This error message indicates that you have a Electrical Problem in your washing machine .
Make an attempt

  • Select PAUSE/CANCEL twice to cancel the cycle.
  • Select RINSE & SPIN, and then select EXTRA
  • RINSE (to turn off the rinse option) if there is
  • excessive water in the washer.
  • Re-select cycle and press START. If the problem
SAM ANDERSON

Sep 27, 2008 | Bosch Washing Machines

1 Answer

What is hd code????


Hi Peter, If I understand your question correctly, you are asking what the code "HD" means for your machine. I am unable to find the code "HD", however, here is a list of the codes for these Maytag models, perhaps one looks similar to "HD". Hopefully this answers your question!

Washer displaying code messages
- "LF" (Washer is taking too long to fill)
Check the following:
Are the water inlet hoses kinked or clogged?
Are the water inlet valve screens clear?
Press PAUSE/CANCEL to clear display.
- "Ld" (Washer is taking too long to drain water from the wash tub)
Check the following:
Is the drain hose kinked or clogged?
Is the drain hose installed properly? See "Connect the Drain Hose." Press PAUSE/CANCEL
to clear display.
- "uL" (Unbalanced Load)
If the load is unbalanced, the washer will display this code while running an imbalanced
load correction routine at the end of the wash cycle and before the final spin. If the code
remains and the wash cycle dial is flashing after the recovery routine has stopped, open
lid and redistribute the load. Close lid and press START.
- "oL" (Over Load)
Is the washer overloaded? The washer has attempted to fill and begin the wash cycle. If
the washer is overloaded, it will drain any water and detergent that was added during the
fill. To correct the overload, remove several items and add detergent. Close lid and press
START.
- "Sd" (Suds Detected)
Did you use regular detergent?
Regular or hand-washing detergents are not recommended for this washer. Use only High
Efficiency ("HE") detergent.
Did you add too much detergent?
Always measure detergent. Follow detergent manufacturer's directions.
If excessive suds are detected, the washer will display this code while running a suds
reduction correction routine at the end of the wash cycle. The suds reduction routine
removes extra suds and assures proper rinsing of your garments. If the code remains and
the wash cycle dial is flashing after the recovery routine has stopped, re-select your
desired cycle using cold water. Press START. Do not add detergent.
- "lid" (Lid Opened)
Is the lid open? Close the lid to clear the display. If the lid remains open for more than 10
minutes, water in the wash tub will drain.
- "HC" (Cold and Hot hoses switched)
This code will appear at the end of the wash cycle to indicate that the cold and hot water
inlet hoses are switched. See "Connect the Inlet Hoses."
- "dL" (Door/Lid cannot lock)
Indicates lid is not locked. Check for items caught in the lid keeping it from closing. Press
PAUSE/CANCEL once to clear the code.
- "dU" (Door/Lid cannot unlock)
Is there excessive weight on the lid, such as a basket of laundry? Excessive weight will
keep the lid from unlocking. Press PAUSE/CANCEL once to clear the code.
- "F##" code
Press PAUSE/CANCEL once to clear code. Press START. If code appears again, call for
service.

May 01, 2014 | Maytag Bravos MTW6600T Top Load Washer

1 Answer

I was getting the F H error code on my washer. I hit cancel twice to clear the code to see of a cycle restart would remedy. Now the wash cycle is stuck on 45 min. remaining & the cancel button is no...


The FH error code on your Kenmore Elite washing machine is an indicator that there is a problem with incoming water. When there is little water coming into the machine, the FH code will appear and the washer will stop. There are a couple of common problems you can check while you are resetting the FH error code. You will need to remove the power supply to the washer to reset the code.

  • 1 Look for the "Pause/Cancel" button on the washer control panel. The button will be below the digital time clock and to the lower right of the wash cycle selector.

  • 2
    Press the "Pause/Cancel" button twice to cancel the wash cycle. Unplug the Kenmore Elite washer from the wall outlet.



  • 3 Check for kinks in the water supply hose while the washer does not have power. Turn off the water supply spigots and remove the hoses from the back of the washer. Check the port screens at the hose connections for sediment buildup and clean as necessary.

  • 4
    Connect the water supply hoses back to the washer and turn on the water spigots. Plug the washer cord back into the wall outlet.

  • 5
    Select the wash cycle and press the "Start" button.

  • Apr 29, 2013 | Washing Machines

    1 Answer

    Front loader stops mid cycle and blinks Er until start button is pressed, the cycle will continue, and sometimes repeats this scenerio three -four times each load. any thoughts anyone?


    The control board has detected an error. Press any button to wake the machine then wait for 5 seconds. Press and hold the START/PAUSE and CANCEL buttons simultaneously then the failure code will appear in the display as an "E" followed by two numbers, a number and a letter or two letters as long as the buttons are held. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. Post back the code for further advice.

    Jan 11, 2011 | Frigidaire Washing Machines

    1 Answer

    My maytag clothes washer Bravo quiet series 300, keeps flashing a Sd error code. Or it may be 5d


    What does the Sd code mean?

    This code indicates that excessive detergent suds occurred during the cycle. The washer will not be able to spin out water with the excess suds. When "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. During this time, the washer pauses the wash action and adds water for additional rinsing. This pause allows the bubbles in the suds to break. This process is necessary and may occur several times to eliminate the suds.

    Concentrated detergents labeled 2x and higher will require a small amount of detergent based on load size. Always follow the manufacturer's recommendations.

    Use only HE High Efficiency detergent for BravosTM washers.

    Is "Sd" displayed and the wash cycle dial is flashing?

    This indicates the washer was not able to clear all the excess suds from the washer. Re-select your desired cycle using cold water. Press Start/Pause. Do not add detergent.

    Is "Sd" displayed and the wash cycle dial is not flashing?

    If "Sd" is displayed and the wash cycle dial is not flashing, allow the machine to continue running, even if it appears that nothing is happening. When "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. During this time, the wash action will pause to allow the bubbles in the suds to break, and the washer will add water for better rinsing. This rinsing process is necessary and may occur several times to eliminate the suds.

    Is the drain hose kinked or clogged?

    Make sure that the drain hose is not kinked or clogged. Straighten the hose for adequate water flow. Remove any blockage from the drain hose, drainpipe or utility sink. Use the U-shaped drain hose form on the drain hose, and secure the drain hose.

    To remove the error display, press Power/Cancel or Pause/Cancel once.

    If Power/Cancel or Pause/Cancel does not work:

    1. Unplug the washer or disconnect the power for one minute.
    2. Plug in the washer or reconnect the power.
    3. Re-select the cycle and press Start/Pause.

    NOTE: If the error remains on the display, and all of the other questions above have been checked, call for service.


    Dec 27, 2010 | Maytag Bravos 3.8 Cu. Ft. Washer

    1 Answer

    My dishwasher is brand new and is not drying the dishes!!! they are still wet. the model number is she55mi 2uc/60


    If you are using a quick cycle there is not a dry cycle included due to the short wash. Ensure you use rinse aid even if you are using a product that includes it, as this assists the drying cycle by breaking the surface tension of the water and allowing less water to 'stick' to the load. Check that you have the machine set to the use the rinse aid and that the intensive dry is on. This can be done by following the instructions in your manual.
    Extra Dry Heat
    With this option you can raise the temperature of the rinse water and increase the drying time for improved drying.
    This option is only for units with a display. If your unit has a display window, please follow the instructions below.
    NOTE: The unit must be powered OFF before activating.
    To activate:
    Press and hold the left "Cancel Reset" button, then • press and hold the ON/OFF button.
    The model number I think should read SHE55M12UC/60.
    I hope this helps.
    When the LED display window indicates a "0" or "1" • release both buttons.
    To activate extra dry heat, press the left "Cancel Reset" • button until the display indicates "1".
    To disable extra dry heat, press the left "Cancel Reset" • button until the display indicates "0".
    Press the ON/OFF button to save the setting.

    Jul 24, 2010 | Bosch 24 in. SHU43 Built-in Dishwasher

    1 Answer

    Dish washer does not turn on CL light stays on when reset count down 6 appears then goes to CL


    Hello and welcome to Fixya,

    I have a ton of service info on Bosch so it`s best I post you an exert from the service pdf`s I have on my PC which will explain the meaning of "CL" and then go from there. This is not a common indication of a control problem, but it could be a problem with the plastic casing which houses the control, we`ll deal with that later.

    I`ve underlined the section pertaining to the "CL", this is for the SHU68** dishwashers only.

    TO OPERATE:

    First depress the On/Off Button until it locks in place.

    Once the On/Off Button is depressed the LED above the previously used cycle will illuminate.

    To change the cycle, simply press the desired Cycle Button twice. The LED above that cycle will then illuminate.

    The Cycle Countdown will display an approximate run time for the cycle chosen.

    This run time will depend on incoming water temperature and the turbidity of the pre-wash water.

    Note: It is normal for the Countdown Display to remain at a time increment for more than one minute, or skip a time increment depending on the calculations of the Control Unit. Also, with continued use the Control Unit will learn the wash and temperature patterns for the most commonly used programs and will then reduce the overall start and running times.

    At the end of the cycle the display will show a CL, indicating that the cycle is complete.

    **TO CANCEL A CYCLE:
    Press the Scrub Wash and Delicate / Econo Buttons both in at the same time. The unit will then drain and the figure CL will appear in the display.**

    DELAY START:
    The Delay Start feature allows the unit to be delayed for up to nine hours. To program, start the unit as described above, but after selecting a cycle push the Delay Start button. The display will show a 1h, or one-hour delay. Continue to depress the Delay Start Button until the desired delay time is reached (up to nine hours, 9h).
    The unit will begin automatically once the delay time has elapsed. To reset the delay, press the Delay Start Button until it reaches 0h.

    TOP RACK ONLY:
    The Top Rack Only feature can be used in conjunction with any cycle. To active, press the Top Rack Only Button after selecting a
    cycle, the Top Rack Only LED will illuminate and all water will be diverted to the upper wash arm for the complete cycle.

    REFILL RINSE AGENT LED:
    The Refill Rinse Agent LED is activated via a Reed Switch on the Detergent Dispenser, Section 4, Fig. 8-3. The LED will
    illuminate when the Rinse Agent Dispenser is empty.
    Service note: The Refill Rinse Agent LED will also illuminate when the dishwasher door is opened and then
    closed even if the Dispenser is full, but will only remain lit for a few seconds.

    “F” CODE:
    An “F” in the display window indicates a filling fault.

    Please note: If the door is opened during the cycle, the On/Off Button will be reset to off and must be depressed again to re-active the cycle. The cycle will resume from where it left off.

    Now that you are equipped with this info, what I`d suggest is trying the **cancel option. ( ** see above )

    Once you`ve tried the cancel option, select a Regular Wash and post back what happens and I`ll try to assist you from there.

    Good luck.

    macmarkus :)


    May 14, 2010 | Bosch 24 in. SHU6802UC / SHU6806UC...

    1 Answer

    E20 flashing mid cycle


    E20 is a general error code to get to the real problem try this..
    Reading Error Codes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up... hope it helps

    Jul 01, 2009 | Zanussi ZWF1430W Front Load Washer

    5 Answers

    Maytag MDBH950AWS Dishwasher won't start


    We have a Maytag Dishwasher that won't start. The only button that lights up is the "Heavy Wash" cyle. When this button is pressed, the "Heated Dry", "Sanatize" and "Extra Rinse" lights up. The dishwasher doesn't start. Eventually all of the lights go out. the buttons start/cancel do not light up.could you in some way help?
    Thank you.

    Jan 17, 2008 | Maytag 24 in. MDBH950AWS Built-in...

    Not finding what you are looking for?

    Open Questions:

    See all Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher Questions

    Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher Logo

    Related Topics:

    244 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jenn-Air Dishwashers Experts

    yadayada
    yadayada

    Level 3 Expert

    70346 Answers

    John Tripp
    John Tripp

    Level 3 Expert

    4654 Answers

    Mike

    Level 3 Expert

    4334 Answers

    Are you a Jenn-Air Dishwasher Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...