Question about RCA RCR450 Remote Control

Open Question

Volume control for our RCA Digital Converter box has suddenly gone blinkie - won't stop. Goes all the way up or all the way down, no stopping in between. How can we fix it?

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Problem programming Zenith Digital TV Converter DTT901 remote.

Be sure that your TV is set to channel 3 or 4 if you are using the RF cable or Video 1, etc if using the Audio/Video cable.  The Installation  Guide should appear.  The "improved" picture that you are seeing is simply the analog throughput, not the digital conversion.

Posted on Jan 17, 2009

  • 56 Answers

SOURCE: Remote codes for converter box

The only information i have found is that Philips codes might work , but I have the same problem needing the code for Magnavox TB100Mw9. Philips/Magnavox is the same company

Posted on Jan 26, 2009

ltfrc
  • 227 Answers

SOURCE: codes for magnavox tv for rca converter box

005 007 045 049 050 054 055 064 097 098 099 153 154 160 170 174 177 181 210 230 234 252 258 259 272 274 283
Hope one of these works for you.

Posted on Feb 22, 2009

  • 4090 Answers

SOURCE: I need codes for a mitsubishi tv on a RCA dtv800b1 digital box

here you go.....
Mitsubishi 0 0 9 3 ,0 1 5 0 ,0 1 7 8 ,0 0 1 9

Please rate our help++++Thanks for using FIXYA

Posted on Oct 11, 2009

  • 144 Answers

SOURCE: Remote control code for an APEX digital converter

If that code is not listed in the little booklet that comes with the remote control then it's probably not capable or controlling the APEX converter. Most of the universal remotes can't accommodate digital converter boxes. The only possibility is doing a search for the code manually as instructed in the booklet. I suspect you won't find anything that will help you out except getting the original control from the Manufacturer or replacing the entire box and you will get a new remote control with it.

This is a problem I have run into before, the universal remotes people just don't have access to the digital converter codes. They are proprietary and vary from model to model and brand.

Zashiban

Posted on Jun 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Program my g.e remote control to a A.T.103 gematic digtal box


Tv Converter Box Deals

www.bestdeals.today/tv-converter-box
Digital Converter, Ematic Digital TV Converter Box with Recording, Playback, ...Digital to Analog TV Converter DTV Tuner Box w Remote, Program Guide, PLUS MORE! ... GE Television Antennas Omni TV Indoor Antenna 24731 ... HDMI/HDTV/DTV/RF/RCA/USB Digital Converter Box TV Tuner With Remote Control PVR.

Ematic DVR Recorder Television HDMI Media Player ...

www.altatac.com/p-15751-ematic-dvr-recorder-television-hdmi-media-p...
Ematic DVR Recorder Television HDMI Media Player Converter Box w/ USB ... TheEmatic AT103B Digital Converter box allows your TV without a digital ... Features an electronic program guide, parental controls, and a USB ... Full function remote controlincluded. .... My Account My Account Order Status Track Your Order.

At103b Ematic Converter Digital Atsc

antennadisht.com/at103b
11 ozmiscellaneouspackage contents converter box remote control 1 x user ... Review (mpn:at103b for sale) Digital Converter Atsc Ematic At103b Box . ... You can find your tracking number by ing on my and scrolling down to your purchase with us. ... Features an electronic program guide, parental controls, and a usb ...

Jan 24, 2016 | Televison & Video

1 Answer

How do I find Colby tv codes to program into a rca converter box remote


RCA converter box remote control have no set-up code to Coby.

Feb 28, 2015 | RCA Televison & Video

1 Answer

My RCA digital converter remote control suddenly stopped working the power and volume to my Toshiba television, what should I do to fix it?


Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Aug 31, 2014 | Televison & Video

1 Answer

Digital stream box, Original remote just stopped functioning...dead!! I now have an RCA Universal remote! How to make the change?? Thanks Tom


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

Aug 23, 2014 | Televison & Video

1 Answer

I have an RCA TV converter box, model DTA800B1. I don't have the box or instructions, I am attempting to conneect it to an RCA TV with a built-in DVD player. I would appreciate the code that the TV...


There are a lot of possible RCA TV codes programmed into the DTA800B1 remote.
Try the following three digit codes: RCA 000, 001, 005, 072, 073, 074, 075, 076, 077, 078, 135,
138, 140, 144, 150, 156, 159, 162, 163, 169, 171, 178, 229, 246, 249, 260, 274, 275, 293, 302 in order.

To program the remote. Turn on your TV manually and press PGM (to the left of the zero in the number pad section). The LED should light and stay lit. Type in the first 3 digit code and press OK (in the center of the arrow keys near the top). See if the gray volume up/down keys work to change the volume. If it doesn't work press PGM again and enter the next code.

Note that the converter box remote will only turn on and off, switch the input from Channel 3 or 4 to AV in, adjust the volume and mute the TV. It will not control any of the DVD functions. Your original TV remote will not control the converter box.

The manual for the DTA800B1 is available here: http://www.1800customersupport.com/productdocuments/DTA800B1_RCA.pdf .

I hope this helps.

Cindy Wells
(who has the DTA800A which is the model without the analog pass-through.)

Sep 17, 2011 | RCA Televison & Video

1 Answer

Hello, the remote has quit working for the volume


Ur free air DTV converter box have problem taking in the programs codes belong to ur tv,belong to the remote.Turn the converter box off/on to reboot ur DTV converter box.Read ur owner manual,re enter ur tv codes,belong to ur tv.U tv should be up and running again.

Jul 31, 2010 | RCA Televison & Video

1 Answer

RCA Converter auto shut down on TV with NO RCA Converter attached


You should check with the translator system. Sounds like it is on there end.

Jul 16, 2009 | RCA Analog (RCA) to Digital (VGA)...

2 Answers

Need sanyo tv code to connect rca/dta800 converter box


sanyo 037,082.083.124.198,268.274 Press program, three number combo, ok, check volume control for function

Jan 01, 2009 | Insignia Digital-to-Analog Converter for...

2 Answers

Why does my RCA TV cycle through channels on its own?


Hi there!
I think your remote may be at fault. Liquid spill or sweat from the hand accumelates on the inside over some time and then becomes sticky. Some of the buttons may be permanently activated. Then other functions won't work. Have someone check it for you or if familiar yourself. Regards, JUS004

Mar 12, 2008 | RCA TruFlat 27F520T 27" TV

Not finding what you are looking for?
RCA RCR450 Remote Control Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71672 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...