Question about Microsoft Wireless Mobile Mouse 3000

2 Answers

Not working New battery and new mouse. Light on on both mouse and receiver.

Posted by on

  • Anonymous Mar 22, 2009

    I just bought the microsoft wireless mobile mouse 3000 for my laptop and it's not working at all. It say's after it's installed that the product is working properly but it's not. Can you please help me.

  • bearie Apr 07, 2009

    My wreless mobile mouse 3000 all the lights are on the mouse are working but the mouse does not work.



    I have:

    * changed batteries

    * uninstalled drivers re-installed

    * ran USB diagnostics

    * went through all mouse hardware properties



    This was a birthday present - but it's about to become landfill if no one can help me



×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Try resetting by taking out the battery and disconnecting the receiver from USB input.

If that doesn't work try uninstall and reinstall.

Good luck.

J_inno

Posted on Mar 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

He just said that he unistalled and reinstalled why the freak would u tell him to do it again im having the same freakin problem with this *** mouse.

it works for a little then it stop working and the pointer does move or moves very slowly

Posted on Jul 18, 2009

6 Suggested Answers

Maanita
  • 1142 Answers

SOURCE: red light on receiver will not go off

there is a green button on your reciever and below the mouse.
press the connect button on both together and release them

Posted on Feb 08, 2008

  • 1 Answer

SOURCE: Logitech wireless usb mouse not working

How do I open the cordless logitech mouse to change the battery. I am about ready to throw it in the river with cement shoes!!!!!

Posted on Jul 29, 2008

yooperbud
  • 8637 Answers

SOURCE: Wireless mouse not picking up

Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

Posted on Jan 20, 2009

  • 20 Answers

SOURCE: Red light doesn't come on ~ Microsoft optical notebook mouse 3000

Look for a small button that protrudes where the receiver is placed at the bottom of mouse. There are two possibilities for turning on the red light, one is that said button is stuck,if that is the case push it down a couple of times and see if the red light goes on, the other is that the button is broken at it's base. Also check that battery contacts are clean and hold it firmly. Good luck!!! Chawah.

Posted on Jun 05, 2009

  • 1 Answer

SOURCE: GE Mini Mouse 98563

Hi, I had the same problem. The USB device has what appears to be a circle with dots connected to it facing the port. The dots are actually the word "Connect" in infintessimally small letters. Plug it in, then use your thumb to press down on the circle while using another finger to press up on the device's underside - in effect, squeeze it between your fingers where the circle is. You'll see a red light blink. At that point you can push the "connect" button on your mouse and it will work.

Posted on Nov 05, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have put in a new battery and the red light is on yet my mouse will not work.


you have a receiver and a mouse on both there are buttons push the button on receiver then on mouse because the receiver searches for the mouse that should work

Aug 17, 2010 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

I just bought a Dynex Wireless optical mouse. My laptop said that it was ready to use but it still is not working. It's on and the batteries are new. I also tried other new batteries. It's still not...


Try pressing Connect on the receiver, then when the light is flashing, press Connect on the mouse. The light should stop flashing and the mouse should be usable. If it's not, check that you have the Dynex mouse driver installed.

Jul 15, 2010 | Microsoft Wireless Optical Mouse

1 Answer

Mouse just quit working, installed new batteries red light works


Normal 0 Make sure that the batteries are good then do the following.

Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch.
Hope this helps you. Bud

Dec 07, 2009 | Logitech Cordless Mouse

1 Answer

Receiver will not light up so the mouse nor the receiver works? help


The reciever for this mouse does not have a light, however, your USB might be a dud (on your computer) so try another port. Also replace the batteries inside your mouse with new ones. This should fix the problem. Then reconnect them with the button on the reciever. Also make sure to hit the power button on the bottom of the mouse. If this does not work, then your mouse if fried and you need a new one.

Oct 02, 2009 | Logitech LX5 Cordless Optical Mouse -...

1 Answer

New mouse/batteries won't connect with receiver. Light on receiver flashed for about a minute after pressing the connect button on it, then the light stays on, but the mouse doesn't seem to work. Should...


Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Sep 05, 2009 | Microsoft Wireless Laser Mouse 5000

1 Answer

Receiver does not seem to be working


Your problem is apparently in your mouse. Look at the bottom of the mouse where the receiver is placed back when not in use, there is a little thin button, it has to be depressed when receiver is in the USB port. Take the battery off, get a new and fresh battery, prior to inserting it back in the mouse, while holding down the small button install the new battery releasing the button simultaneously. Check also that the battery contacts in mouse are clean. Good luck!!! Chawah.

Jul 17, 2009 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

Still no power in the mpose after installing new batter.


check battery + - connections make sure theyre correct, then look for any on off switch if you have, then try to sync the receiver and mouse with the bottons on the receiver and then mouse, it should go on.

May 20, 2009 | Logitech LX5 Cordless Optical Mouse -...

1 Answer

Receiver light is steady green. mouse won't light up. cursor won't move.


Why don't you try at the moment of placing a new battery to see if the small button that protrudes, where the receiver is located at the bottom of the mouse is pressed down. Without the receiver in place that **** on must be out for as long as the receiver is in the USB port.
Good luck!!!
Chawah.

May 19, 2009 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

New pd7260lsr not working


Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

Jan 08, 2009 | Micro Innovations PD7250LSR Wireless RF...

1 Answer

Cordless Mouse Just quit working While In Use


Most cordless mouse I saw has a reset button. Press this button, make sure you're in the transmission distance from the receiver when you do this.

Sep 12, 2008 | Logitech Cordless Mouse

Not finding what you are looking for?
Microsoft  Wireless Mobile Mouse 3000  Logo

Related Topics:

844 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...