Question about Belkin TuneCast II FM Transmitter

1 Answer

I need to know how to turn it on...i don't know if its broken or what...cuz i put in new batteries and it won't trun on

Posted by on

  • n_mariusz Mar 03, 2009

    ok thanks a lot

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

1. Open the battery cover on your TuneCast II Mobile FM Transmitter. Install the included AAA batteries and
replace the battery cover.
2. Plug the 3.5mm connector into your iPod player or other portable music device.
3. The AUTO ON feature will power on the FM Transmitter when the unit detects an input signal. Your FM
Transmitter’s “AUTO ON/OFF” feature uses your audio player’s volume level to automatically power on and
off.
For best results, keep your player set at a medium volume level. NOTE: Setting your device volume very
low may cause the FM Transmitter to turn off, even if the audio player is on.
You can also press and hold
both and buttons simultaneously for two seconds to turn on the unit. To turn off the unit, press
and hold both buttons simultaneously again for two seconds.

Posted on Mar 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Altec Lansing im600 wont turn on when plugged in to power


The connector on the im600 is broken. It cannot be repaired economically.

Apr 13, 2014 | MP3 Player Accessories

1 Answer

Ipod touch will not charge, brand new


Try charging from usb or docking station, if it works than your charger is broken, if doesn't i would return product to shop as its probably broken socket or something wrong with software. Anyway usually it's just a charger and than as it's new phone i would go back to shop and ask to swap for working one :) Sometimes if battery is dead it may take few seconds or even minutes till your screen turns on so after plugin in wait a while.

Hope it help

Feb 11, 2014 | Apple iPod Touch 8GB 32GB 64GB 3rd...

1 Answer

Mirage omnivibe won't turn on


hello, i have this same machine but i didn't have a power cord for it - ( used playstation cord cuz its the same! ) but there is a fuse inside - its a small tube one right where the power hooks up to the circuit board, i would open the casing and check it out - the casing has a screw behind the warning sticker on the back - just a heads up - took me a few min to realize that when i was taking mine apart! hope this helps if not then you will have to check all the circuitry and make sure every things connecting properly. cheers

Apr 05, 2012 | Mirage OmniVibe Stereo Speaker System...

1 Answer

My iPod went through a washer. It seems to be working fine save for two problems: 1) The battery will not charge, and thus the iPod must be connected to power to function 2)While the screen seems to be...


the acid in the dish washing detergent probably fries your battery it might be cheaper to buy a new one you can take it to the mac store if there's one near you and they may just give you a new one as long as you don't tell them you put it in a dishwasher

Jun 05, 2011 | Apple iPod Nano Video 16GB 5th Gen Silver...

1 Answer

I bought I Home keyboard IH-K231MS today and I don't have a MAC will it work with HP computer or any other computer ?.


Don't know for sure, but the special keys need a driver you have to install (which is written for an Apple machie, so probably won't work. The normal key may work, but you might have to ID the keyboard. If you can connect an iPod to a PC via a USB cable to sync it (have never used a pc so don't know if that's possible), the PC may be able to see the iPod.
All in all, maybe.

Jan 12, 2011 | iHome iConnect Media Keyboard With iPod...

2 Answers

The unit suddenly stopped working; contact is plugged in but on-button does not work. No lights on, it does not seem the unit has power.


I faced a similar problem with Mine a couple of days ago.
Try these below
1. Keep the unit plugged to the wall socket (and charge). Green light (indicating charging) may not glow. It doesnt matter. Keep it on for a few hours.
2. Then try to turn on the unit.
3. If it still doesnt turn on, fold the unit and keep it aside for a few mins (say 10 mins).
4. Open it and then try to turn it on.

Mine worked with step 4.

See if this helps.
regards,
Lakshmi

Nov 21, 2010 | Altec Lansing Inmotion-IM600...

1 Answer

My mom put my ipod nano 4th generation in the washing machine, and now the ipod wont turn on unless its plug to the computer or the power cable


It sounds like your battery is dead.. Your lucky it still even works..

You will need to purchase a new battery
here is a link to a website where you can purchase a 4g battery for 15 dollars.

http://store.kokopellimusic.us//SearchResults.asp?Search=battery+kit


Nov 02, 2009 | MP3 Player Accessories

1 Answer

Remote


It might of gotten a liquid inside of it. You could dry it with a hair dryer. And see if that workers. If not just try differnt batteries them may of been duds. If all else fails get a new remote..

Write back and let me know :)
hope helps you

Nov 05, 2008 | Apple Lightcast Interactive Lightshow...

Not finding what you are looking for?
Belkin TuneCast II   FM Transmitter Logo

Related Topics:

1,314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin MP3 Player Accessories Experts

bill tarkulich

Level 1 Expert

33 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

ka4iup
ka4iup

Level 3 Expert

3944 Answers

Are you a Belkin MP3 Player Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...