During play, playstation 3 will randomly lag and stop then resume play for a second then do the same thing. Only during play

Basic CD Operation:
1. Power the unit ON if STANDBY mode by pressing the STANDBY ON/OFF(#3).The default
mode is RADIO,so press the FUNCTION button(#8) to switch to the CD mode.
2. Open the CD door by pressing the OPEN/CLOSE door release button(#9).Inset a CD with the
label facing upwards and close the door.
3. The unit will read the disc and display the total number of tracks found on the disc on the
display
4. To begin playback press the PLAY/PAUSE/BAND button(#1).The first brack on the disc will
play.
5. To pause playback press the PLAY/PAUSE/BAND button(#1) once more.Pressing again resumes playback.
6. Press the STOP button(#2) to stop playback.
7. Use the AL 1/VOL- or AL 2/VOL+ buttons(13,14) to adjust the volume level.
Advanced CD operation
1. Press the FWD/TUN+ button to skip to the next track.Press and hold to fast forward the
current track.Release the button to resume normal playback.
2. Press the REV/TUN- button to skip to the previous track.Press and hold to fast rewind the
current track.Release the button to resume normal playback.
Random playback
1. Press and hold the SLEEP/RDM button(#15) either during playback or in STOP mode for 2
seconds and then release.You will see the letters RDM appear on the display to indicate the
RANDOM mode in active.
2. If you enable the RANDOM function in STOP mode,press the PLAY/PAUSE/BAND button
to begin playback.If you enable the function during playback the next track will begin the
random order
3. To cancel the RANDOM playback mode,press and hold the SLEEP/RDM button(#15) for 2
seconds and release again.The letters RDM will disappear from the display to indicate the
function has been cancelled.
Repeat function
1. Before or during playback press the REPEAT/PROG button(#6) to repeat a single track
indefinitely.You will see REP appear on the display when active.
2. To repeat all tracks on the disc,press the REPEAT/PROG button(#6) twice(or once more if
you have already activated the repeat once function).You will see REP on the display blinking
to indicate the repeat ALL function is active
3. To cancel any repeat modes,press the REPEAT/PROG button(#6) once more(if in repeat all
mode or twice if in repeat once mode).The letters REP will disappear from the display.
CD program playback.
NOTE:You can only program a playback sequence while the disc is in STOP mode.
1. Press and hold the REPEAT/PROG button(#6).You will see P01 appear on the display to
indicate the program function has been initiated.
2. Use the FWD/TUN+&REV/TUN- buttons to select the track you want to play in slot No 1.
3. Press the REPEAT/PROG(#6) to store the selected track in slot 1.The display will now
display P02 to indicate your selecting the track for slot 2.
4. Repeat steps 2 to 3 for every track you wish to program up to a maximum of 20 tracks. If you
try to program more than 20 tracks the display will revert back to P01 and will overwrite the
first slot again.
5. Press the PLAY/PAUSE/BAND button(#1) to begin the programmed sequence playback.
6. Should you wish to cancel the programming you can press the STOP button to resume normal
function.

The jerk or pause can be due to dirty disc; dirty head; or buffer full error. try different media to eliminate head/disc or device

It's PSN error, there's nothing you can do. The keep getting attacked by lizard squad recently. After they fix it things will just work out themselves. And here's another random ps3 picture for no reason

Please try again and again till it done successfully.

Setting DELAY for All Search Ranges
You can set the scanner to have a delay after the end of a transmission before searching
resumes. This slows searching, but helps you prevent missing replies on a frequency.
1:SERVICE OPTION → :CHAIN SEARCH → 3:DELAY
1:NONE
The delay is turned off.
2:1 SECOND
The delay time is 1 second.
3:2 SECONDS
The delay time is 2 seconds.
4:4 SECONDS
The delay time is 4 seconds.
28
5:INFINITE
When the scanner stops on a transmission, you must press RSM to resume
searching.
6: -2 SECONDS
The scanner only stops on transmissions for 2 seconds, then automatically
resumes. To hold on the transmission, press /HOLD during the 2-second pause.
7: -5 SECONDS
The scanner only stops on transmissions for 5 seconds, then automatically
resumes. To hold on the transmission, press /HOLD during the 5-second pause.
8: -10 SECONDS
The scanner only stops on transmissions for 10 seconds, then automatically
resumes. To hold on the transmission, press /HOLD during the 10-second pause.

It usually means your internet is to slow if you have satillite internet then it wont work.

The lag you're experiencing most likely isn't the result of any physical abnormality, but rather you're network. How many people in your household share the same network? The more people on a network, the slower it will run. (I've actually experience this first hand) You might have too much people sharing your network for your game to run smoothly. Try to go on hours that everyone is not on. As for the repeated starts and stops, during game play, don't stress that. Its normal.

If you want to to try it out try it.but lags in dynasty warriors 6 are normal like mine i have 2-6 it works fine but it lags sometime but it's normal.

1.Call from a touchtone phone.
2.During greeting message, enter your remote code. (Code is "11" by default, or you can set your own beforehand via Menu>Initial setting>Set answering>Remote code>enter your desired 2 digit number)
3. Unit will announce number of new messages, and play them back.
4.After 3 seconds, voice guidance will start; follow as necessary.

Bypass voice prompt by pressing:
1 Repeat message (during playback)
2 Skip message (during playback)
4 Play new messages
5 Play all messages
9 Stop (to resume, enter a command w/in 15 sec, or voice prompt resumes)
0 Turn answering system off
*4 Erase this message (during playback)
*5 Erase all messages
If answering system is off, you can force it back on by calling and letting phone ring 15 times.
Good luck. Hope this helps!

Have you tried playing the game with the controller connected to the PS3 via the USB cable? Also, just as a test, DISABLE the Internet connection option on the PS3's menu to see if it makes any difference. I found that for some reason some titles (namely Enchanted Arms) have been know to act erratically with an active Internet connection whilst playing.