Question about E-Machines T5082 PC Desktop

1 Answer

Cpu up grade

Has a socket 775 P4 3GHz/2M/800fsb prossor. will a Pent D dual core 3GHz/4M/800fsb work?

Posted by on

  • Rich Bidault Mar 28, 2013

    hey thanks, i knew it was an intel based board but when i ran that # D102GGC2 i dident get any hits on the intel site. Intel Pentium D 925 is the one i'm going with, Is there a big difference? thanks again for the info

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • E-Machines Master
  • 5,660 Answers

Yes sir.

The eMachines T5082 Desktop PC uses an Intel D102GGC2 motherboard,

http://www.newegg.com/Product/Product.aspx?Item=N82E16813121031

The motherboard chipset is an ATI Radeon Express 200,

http://en.wikipedia.org/wiki/Comparison_of_ATI_Chipsets#Comparison_of_Northbridges_2

Scroll down the chart under the - Model - heading.
ATI Radeon Xpress 200 for Intel.

Processors Supported;
Intel Pentium 4, Intel Core2

If the motherboard chipset will support an Intel Core 2 Duo CPU, it will support an Intel Pentium D.

Plus you can always go to Intel Support, and look, lol!

http://www.intel.com/support/motherboards/desktop/d102ggc2/sb/CS-026580.htm

http://en.wikipedia.org/wiki/List_of_Intel_Pentium_D_microprocessors#.22Presler.22_.2865_nm.29

So what are we talkin' about?
A Intel Pentium D, model 925 or model 930?

Up To a maximum frequency rate ('Speed'), of 3.0GigaHertz
L2 cache of 2 x 2MegaByte (2MB)
800MegaHertz Front Side Bus. (800MHz FSB)

FOLLOW Anti-Static Procedures.
THOROUGHLY clean the top of the Processor, and bottom of the Heatsink.
Properly apply fresh, new Thermal Paste.

http://www.hardwaresecrets.com/article/274

For additional questions please post in a Comment.

Regards,
joecoolvette

Posted on Mar 28, 2013

  • joecoolvette
    joecoolvette Mar 30, 2013

    Pggh! How did that guy below me get in on this? Lol!...........A) Difference? Is this a reference to an Intel Pentium 4, compared to an Intel Pentium D? If so, yes. The Intel Pentium 4's are a Single-Core processor. The Intel Pentium D's are a Dual Core processor. It is actually TWO Processors on one die chip. Instead of having just one processor work on the task, you would have two Processors working on the task. Team up on the task. IMHO it's worth it. Also upgrade the Ram Memory, if not maxed out already. That is.........the Intel D102GGC2 motherboard, will support 2GB of Ram Memory. There are two Ram Memory slots. EACH slot has a maximum ram memory amount, of 1GB. Again, don't forget about Anti-Static Procedures. (And cleaning)..........If the reference is to an Intel Pentium D 925, compared to an Intel Pentium D 930, I would go with the Pentium D 925. Availability. JMHO.

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
joecoolvette
  • 5660 Answers

SOURCE: cpu upgrade , please help

tech-gu818,

When looking to see what processors a computer will support, try to find out what motherboard chipset is on the motherboard, and the processor socket.

The motherboard chipset is the;
1) Northbridge chip
2) Southbridge chip

[Chip and Chipset are slang terms for Integrated Circuit, or IC.
A Processor is one type of Integrated Circuit]

The Northbridge chip is responsible for handling the Processor, Ram Memory, and high-speed graphics, such as AGP, or PCI-Express.

Integrated graphics, or a graphics card installed in a PCI slot, is handled by the Southbridge chip. The slower capabilities of a computer are handled by the Southbridge chip.

This motherboard diagram may help further illustrate the above statements,

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

(You can also type,
1) Northbridge (computing)
2) Southbridge (computing)
in Wikipedia's search box to obtain more info )

How to find out what motherboard chipset the eMachines W3502 uses?
Three ways:

1) Go to the computer manufacturer's support website, and look under Specifications.
2) Download the free, tiny, program CPU-Z from CPUID.com
3) Download the free, tiny, program Belarc Advisor

Fortunately eMachines Support lists what the W3502 motherboard chipset is,

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=W%20Series&model=W3502

Chipset: ATI Radeon XPress 200

Now look for information on ATI's Radeon XPress 200 chipset.
For this we can go back to Wikipedia once more,

http://en.wikipedia.org/wiki/Ati_radeon_xpress_200

Reading the top sentence in the first paragraph you will note,
".......Pentium 4, Pentium D, and Celeron processors, ......using either a Socket 478 processor socket, or an LGA 775 processor socket."

What isn't stated in the first sentence is that it will also support Intel Core2 processors. That is stated on the right side of the page, in the information box under the subheading - CPU Supported

I wouldn't think anything higher than an older E4400, or E4500 though.
The E4400, and the E4500 use an 800MHz Front Side Bus. So does the E5300 Dual Core.

The information box states that processors with Up To a 1066MHz FSB are supported.
I just don't know if there is a BIOS update needed, or if a BIOS update is available, in case it's needed.

Needed to change the voltage, and multiplier, so that a processor with a 1066MHz FSB can be used.

To summarize:

The ATI XPress 200 motherboard chipset, on your eMachines W3502, will support an Intel Dual Core E5300.

Advise:
Do Not forget to use anti-static precautions. Your body carries Static electricity. Static will fry out (Short circuit) computer hardware components.

A Processor is the most susceptible hardware component to static shock.

I would advise buying a cheap $6 ESD wrist strap, from some where like Radio Shack, or a similar store, and using it.
Clip the alligator clip to an unpainted surface of the metal frame, of the computer case. (Computer unplugged from power)

Barring this, make sure you touch the metal frame of the open computer case, before you reach inside. (Computer unplugged from power)
If you get up, and walk away in the middle of working on your computer, upon your return touch the metal frame again.

Make Sure the top of the Processor's case is clean, and the bottom of the Heatsink.
I use an old credit card to scrape both surfaces as clean as I can, then follow with Q-tips dipped in Isopropyl Alcohol.

Usually takes a few dipped Q-tips, as thermal paste is a gooey mess, and the alcohol takes time to break it down.

Isopropyl alcohol is also referred to as Rubbing Alcohol. 91 percent is best, but 70 percent will do. Nix on the 50 percent.

CAUTION!
Isopropyl alcohol is Extremely Flammable! Use in a well ventilated area, with no sparks or flames present.

Use fresh, new thermal paste, never try to reuse old thermal paste, or a thermal pad. Thermal paste properties break down over time, and the thermal paste becomes more of an Insulator, than a Conductor.

Thermal pads are only good for taking off, and flying at the cat.
They're Junk!
(Meooow! Hey watch it dude! You almost hit me with that!)

Thermal paste doesn't have to be Artic Silver 5. A good quality thermal paste, applied correctly, will get you down the road just fine. A 'Mom and Pop' computer repair shop, should have a one processor tube, for around $2.

You Should be okay with the same Heatsink/Fan combo, as the Intel Pentium Dual Core E5300 puts out less heat than a Celeron D 352, or around the same amount.

Be sure the inside of the computer sparkles, as well as the Heatsink, processor fan, and the inside of the Power Supply. Use a can or two, of compressed air for computers.

(Celeron D's are not dual core processors. The Pentium D's are)

Posted on Mar 25, 2010

Testimonial: "thanks... really hepls..."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mobo compatible w this cpu?


http://www.asrock.com/mb/overview.asp?Model=CONROE1333-DVI/H

CPU Support List,

http://www.asrock.com/mb/overview.asp?cat=CPU&Model=ConRoe1333-DVI/H


Intel Pentium D model 830, Smithfield Core, sSpec Number SL8CN,

http://www.cpu-world.com/sspec/SL/SL8CN.html

From all indications -> YES

Regards,
joecoolvette

[-> FOLLOW Anti-Static Precautions. A Processor is the most susceptible hardware component to Static shock.
Use good Thermal Paste,

http://www.hardwaresecrets.com/article/274

Oct 09, 2012 | Computers & Internet

3 Answers

Can I Use A Intel Pentium D 945 3.4GHz/4M/800 Dual Core SL9QB On This Motherboard


Hi,

The specification for this motherboard can be found here:
http://www.foxconnchannel.com/en-us/product/motherboards/detail_overview.aspx?id=en-gb0000173

It says it can support 800MHZ or 533MHz Front-side bus Intel chips with socket 755

The specification for Intel Pentium D SL9QB is here:

http://ark.intel.com/Product.aspx?id=27520

It says this is a socket 775 CPU with an 800MHz bus so yes, this motherboard should work fine with this CPU.

Please rate my answer if this helps,

Many thanks,

Chris

Mar 03, 2011 | Foxconn 848P7MB-S Motherboard

3 Answers

Nobody has a list of cpu's that will work with this mobo. Biostar P4M800-M7A Ver. 7.0. It was sold as compatible with dual core cpu's, but no-one has a list of which intel 775 dual cores. Did New Egg lie?...


P4TAW Extreme 1.0 925X Socket 775 Pentium 4 3.6GHz I915P-A7 1.0 915P Socket 775 Pentium 4 3.8GHz Celeron D 3.06GHz I915G-M7 1.0 915G Socket 775 Pentium 4 3.8GHz Celeron D 3.06GHz I86PE-A7 1.0 865PE Socket 775 Pentium 4 3.8GHz Celeron D 3.06GHz I865G-M7 1.0 865G Socket 775 Pentium 4 3.6GHz Celeron D 3.06GHz N4SIE-A7 1.0 NF4 SLI Intel Ed. Socket 775 Pentium 4 3.8GHz Celeron D 3.06GHz P4M80-M7 1.0 P4M800 Socket 775 Pentium 4 3.6GHz Celeron D 3.06GHz

Dec 08, 2009 | Biostar P4M800-M7A Motherboard

1 Answer

Dell E210882 Socket 775 PC Computer Motherboard MB SATA can this surport daul processors


it only support socket 775 single core pentium 4 or celeron processors IT DOES NOT SUPPORT ANY DUAL CORE CPU'S SUCH AS PENTIUM D OR ANY DUAL CORE OR CORE 2 DUO PROCESSORS

Nov 21, 2009 | Computers & Internet

2 Answers

What dual core CPU is compatable with the dragon plus?


hello sir, hi im afraid that the dragon plus has no AMD x2 (DUAL CORE) compatible CPU. if you want a dual core motherboard compatible, get the socket AM2 version for AMD or the LGA 775 for intel processor.

Nov 06, 2009 | Soyo KT333 Dragon Plus Motherboard

1 Answer

Can i?


An attractive value of dual core processors is that they do not require a new motherboard, but can be used in existing boards that feature the correct socket. Check sockets if same then enjoy.

Jun 05, 2009 | Abit AS8 Motherboard

2 Answers

Core (TM) 2 duo processor E7300, socket LGA 775, freq. 2.66 GHz, FSB 1066 MHz, L2 Cache 3MB, PCG 06, core 45nm what asus motherboard should i buy


buy any motherboard BUT asus.
asus tech support is rubbish.
i run my system on an ASROCK motherboard.
excellent boards, 2500mhz bus, can handle any cpu, most have 4 ram slots.

Feb 24, 2009 | ASUS LGA775 SOCKET FOR INTEL CORE2...

3 Answers

Micro star ms 7091


Do you know what the CPU socket is or chipset? If the CPU socket is a 478 then no dual core. If it a 775 then you might be able to use a Pentium D dual core w/ 800MHz FSB.
If you have a 945 chipset then the above will be true.

Jun 05, 2008 | Medion MED-1511 PC Desktop

Not finding what you are looking for?
E-Machines T5082 PC Desktop Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...