Question about IP Phones

1 Answer

A call from the GXP 2000 rel2 phone cannot be transfered. Example: sta 761 calls sta. 416, sta. 416 transfers the call to sta. 403. The line 1 button on the GXP flashes, caller hears music on hold, sta 403 begins to ring but stops ringing when the call is released to 403. Line 1 continues to flash as if on hold on the GXO 2000

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Latest firmware version corrected the problem

Posted on Mar 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Factory Reset Grandstream GXP 2000 w/o using the menu?


From the Granstream User Manual (Page 44):
Restore Factory Default Setting
WARNING: Restoring the Factory Default Setting will delete all configuration information of the phone.
Please backup or print all the settings before you restoring factory default settings. Grandstream is not
responsible for restoring lost parameters and cannot connect your device to your VoIP service provider.
INSTRUCTIONS FOR RESTORATION:
Step 1: Press "OK" button to bring up the keypad configuration menu, select "Config", press "OK" to
enter submenu, select "Factory Reset" (Please refer to Table 5-1 of keypad flow chart)
Step 2: Enter the MAC address printed on the bottom of the sticker. Please use the following mapping:
0-9: 0-9
A: 22 (press the "2" key twice, "A" will show on the LCD)
B: 222
C: 2222
D: 33 (press the "3" key twice, "D" will show on the LCD)
E: 333
F: 3333
Example: if the MAC address is 000b8200e395, it should be key in as "0002228200333
395".
NOTE: If there are digits like "22" in the MAC, you need to type "2" then press "->" right arrow key to
move the cursor or wait for 4 seconds to continue to key in another "2".
Step 3: Press the "OK" button to move the cursor to "OK". Press "OK" button again to confirm. If the
MAC address is correct, the phone will reboot. Otherwise, it will exit to previous keypad menu interface.

https://www.grandstream.com/products/gxp_series/general/documents/gxp_usermanual_english.pdf

Apr 03, 2014 | Grandstream GXP-2000 IP Phone

2 Answers

I'm having trouble transfering calls on my Norton IP 1140E. Every now and then when I take a call, the 'transfer' label hops over to a different button and I'm completely unable to transfer...


Hello, depending on the status of the call the buttons will change automatically. Be aware that you may not be the initiator of the call so you may not have all the features. I hope this helps. If not you may contact me at: http://www.liveperson.com/nortel-guy

Jul 28, 2011 | Nortel 1140E

1 Answer

How to remove conference/transfer facility in 9620 ip phone?


If you dont want a phone to be able to transfer a call anywhere, then remove all but 1 intercom appearances.

With only 1 appearance, the call can not be transferred anywhere.

Feb 08, 2011 | Avaya 9620 IP Phone

1 Answer

How do I transfer a call from the Polycom SE-225 phone?


Follow these steps :
1.1
Press the function (FCN) button on the handset while on a call and then press the number "2" button. This will place the call on hold and you will hear a dial tone.
2.2
Call the number or extension of which you want to transfer the call.
3.3
Push the FCN button on the keypad and then the number "2" button and immediately transfer the call. You do not need to wait for the other party to answer.

Oct 29, 2010 | Polycom SoundPoint Pro SE-225

1 Answer

Is there a way to transfer phone calls from this phone?????


yes, you should have a transfer button on the phone. click that then type the phones extension to which you which to transfer the call and hit transfer again

Apr 16, 2010 | Polycom SoundPoint 330 IP Phone

1 Answer

How to transfer a call on Nortel Networks M3904


Use the Transfer feature to redirect a call to the appropriate person.
To use the Transfer feature to direct a call to a third party:
To return to the original call, if the transfer is incomplete:
1. Press the Transfer soft key. The other
party is on hold and a dial tone sounds.
The LCD indicator light flashes steadily.
2. Dial the DN to which the call is to be
transferred or use Personal Directory,
Redial List
, or Callers List to select a
number to dial.
3. When that number rings or a person
answers, press the Transfer soft key to
connect the calling party.
If the person called is not available,
press the line (DN) key (next to the LCD
indicator) to reconnect to the original
call.

Jun 23, 2009 | Nortel 2002 IP Phone

1 Answer

Calls ringing in on a line already in use


You need to change the 'number of call before engaged' value in the phone configuration to 1 for each of the lines... that way the line will be engaged and the next line will be used.

Dec 15, 2008 | Cisco 7960 IP Phone

1 Answer

Call Transfer


Hi there,
Depending on which type of phone you have;if you have one with a display you will see "Trans" on most Nortel phones with displays.It's only the M3902 which has a button either wriiten "Transfer" or dotted like a boomerang.
Hope this will help

Nov 20, 2008 | Nortel 2002 IP Phone

1 Answer

Gxp blinking


Replace your power cable.

Dawit

Jun 28, 2008 | Grandstream GXP-2000 IP Phone

1 Answer

How to do voip calls with the regular phone


Did you read the manual?

first you press ##
then you will hear a weird buzz
then you dial 00 and then the phone number including the country code (example in canada.. you will do 00 1 450 419 0000

then you press *

so again,

## (weird buzz) 00 1 450 419 0000 *
and wait few seconds

Nov 15, 2007 | D-Link DPH-50U IP Phone

Not finding what you are looking for?
IP Phones Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top IP Phones Experts

David Payne
David Payne

Level 3 Expert

13437 Answers

Stan Ford

Level 3 Expert

2263 Answers

Tom Chichester

Level 3 Expert

24642 Answers

Are you an IP Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...