Question about Mitsubishi WS-65513 65" Rear Projection HDTV

1 Answer

My television has a poor picture and the picture seems to be seperated. The manual tells you how to line it back up but I cant get that Tee to line up being a single straight white line anymore. I have read the other post and I am certain that the cause of this problem is the set is very sensative to movement and maybe the tubes are no longer aligned. Anyway best of luck to all of you.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

The problem is in the convergence circuit. If you can solder, you should be able to fix this yourself. Please be aware that there are potentially dangerous high voltages present inside the set even when unplugged.

Let me know if you wish to attempt the repair yourself and I will provide additional details and instructions.

Dan

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Colors are seperated on toshiba 50A61


Go into menu and with original remote call up convergence--either it has a problem(will not adjust) or you may with the remote be able to manually adjust the convergence back: sometimes if a power outage/surge it scrambles the convergence memory.

Aug 28, 2012 | Toshiba Projection Televisions

1 Answer

Color issues


most probably your convergence circuit has gone bad.  could be as little as a burned resistor or two to the convergence i.c.'s being bad.  may be time for a tech

Jul 31, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

Colors seperate and picture bent


THIS is a convergens problum .pls. prees menu key and see convergence menu select and see cross line on center the screen select one by one colour line to meching and cross line is white see the pictur is ok.

Oct 03, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Red and Blue seperate and picture curved toward the middle


You have a hardware problem, you cannot fix it using the menu. in fact you could make it worse.

Try googling DIY convergence repair if you can solder.

If not then call in a pro, about $300

Jul 12, 2009 | Toshiba 50H81 50" Rear Projection...

1 Answer

Picture on AKAI 54 inch HD ready tv is not square.


akai is not a good brand of tv to start with they seem to have alot of problems and finding parts is impossible to do

Oct 16, 2008 | Akai PT5598HD 55" Rear Projection...

1 Answer

Pt-47wx49e convergence problem


I just replaced the 2 convergance chips, but it did not seem to fix the problem. I then tested all the resistors that feed the convergence chips anf there was a 2.2 ohm fusable blown. IT was R7050 on mine. That seemed to fix it so that I could adjust all the colors through the convergence 2 screen. There seems to be a slight bow near the bottom when you look at the c2 screen, but not noticable when you are watching a picture. Since I got this broken, I am not sure how perfect it should be.

If anyone can send me the service manual, I would appretiate it. Thanks.

Oct 10, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Jvc


I have the same problem on my tv - the colors are seperated - the picture is blury and in converge mode the colors will not line up.
Need to know if I need to go and buy a new flat screen tv.
Any advise is appreciated. Thanks


May 25, 2008 | JVC AV-56WP74 56" Rear Projection...

2 Answers

Lines in picture


can you post a picture of the lines that are going across your screen? Sounds like maybe retrace lines.

Feb 14, 2008 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

Retrace lines and poor convergence


you have bad solder connections on the convergance board solder then and get back to me k

Oct 30, 2007 | JVC AV-48WP74 48" Rear Projection...

2 Answers

Annoying diagnol lines in background


Sorry to tell you gus, if you paid 500 bucks for convergence IC's you got #### and didnt get kissed. A repair like this should not go much over 250 to 300 bucks.

Sep 29, 2006 | Samsung HCM4216W 42" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65513 65" Rear Projection HDTV Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...