Question about Evga e-GeForce 8600GT, GeForce 8600 GT, Graphic Card

1 Answer

Ok i received my new pc yesterday and installed windows vista etc, it was working great. This morning i woke up and turned my computer on and i heard 3 short beeps which were continuous and never stopped, 3 beeps > short pause > 3 beeps etc. There is no signal on the monitor and im having to resort to my old PC to find out the problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 408 Answers

3-3 is either video card or memory related.  Try to reseat your video card and see if that helps.  If nothing still, try to reseat the RAM.  If that doesn't work, try another video card.  If that doesn't work, try different memory.  If all that doesn't work, let me know and I will see what else I can do to help you out.  But from my experience, it is almost always RAM related.

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed my new netgear router yesterday and when I woke up this morning my pc was on and now I can't shut it down without turning the power off. Please help!


computer freezes from time to time just make sure your cleaning it out and scaning it for spyware,adware and viruses
use malwarebytes for virus scan
use ccleaner for cleaning junk files and etc

Jul 29, 2014 | NetGear WNDR3400 N600 Wireless Dual Band...

1 Answer

2005 Volvo XC90. Normally runs great. Yesterday


Make sure your battery terminals are clean, also, have the battery checked as well.

Sep 09, 2009 | 2005 Volvo XC90

1 Answer

Dell Inspiron e1505 Backlight issue


when you leave the computer for a long time inactivity it goes to hibernate or standby
you can change it on control panel power options

Jul 10, 2009 | Dell Inspiron E1505 Notebook

1 Answer

CONNECTION ABORTED


My advise, dump Vista, reinstall XP
You will always have trouble with Vista and find that you will have to pay for updates and old files will not open. Not to mention if you attach files to emails which were created with Vista may not always open on the receiver's system.

Apr 19, 2009 | Microsoft Windows® Vista 64-bit Business...

3 Answers

Beaping Sounds When turning PC on


Hello,
These beeps sound exactly like that of the RAM. If you are not too skeptical about going inside your PC, you can simply remove the RAM and reseat it back firmly. Sometimes this happens that the memory loses good connectivity and would just need a reseat.

Thanks,
Lolita

Mar 02, 2009 | Evga e-GeForce 8600GT, GeForce 8600 GT,...

6 Answers

Lexmark z11 Vista Compatible?


Looks like I've cracked it [Touches wooden desk]. Need a USB to IEEE 1284 36-pin Parallel Printer Cable, like the one I received today (ordered yesterday from www.cables2u.co.uk). First, connect it to Z11. Turn on Z11 and boot up Vista PC/laptop. (I run Vista Business on my laptop.) Connect cable to computer. Message appears "Installing device driver software". Click it for status. 'Found New Hardware' box appears. Click 'Locate and install driver software'. A message appears "Error loading LXADSUI.DLL. Specified module could not be found". Click 'OK'. Message appears saying driver software installed successfully. ["Yeah, right ..."] (Have faith, folks!) Now, click Start, then Control Panel and double-click Printers. Right click on Z11 and click on Set As Default Printer. Right click on Z11 again and click on Properties. Check on Ports tab that Port USB is ticked for Z11. On Cartridge Maintenance tab, check right cartridge is showing. If not, click 'Install/Change Cartridge' and follow instructions. Then 'Clean Print Nozzles' and 'Align Cartridges'. Check settings on the other tabs in Properties look OK and try printing a test page! It looks good to me!

Jan 15, 2008 | Lexmark JetPrinter Z11 InkJet Color...

1 Answer

CONNECTION ABORTED


go into safe mode and take out mcafee. go to their website and check and see if your version is compatible with VISTA

Nov 12, 2007 | Microsoft Windows Vista Ultimate Edition

Not finding what you are looking for?
Evga e-GeForce 8600GT, GeForce 8600 GT, Graphic Card Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evga Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Mike

Level 3 Expert

4334 Answers

Are you an Evga Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...