Question about RCA E09344 Under Counter Kitchen TV 9" Television Television

1 Answer

Intermittent audio...picture fine

9"RCA mod:E09344...chassis:TX808J
loss of audio(intermittent)...recovery only when engaging volume/UP on either TV or remote console.(no schematic)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 463 Answers

Does this model have a headphone jack? If so, plug a pair of headphones or external speaker into the jack, turn the volume to an acceptable listening level and see if the problem goes away. If so, the headphone jack may be bad.

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can attach external speakers with RCA plugs or a mini-plug? Is the digital audio output the only connection for audio output? (The model is TC-P50G25)


Well isn't this just a find how do you do!!
It appears that on this set there is no headset or other audio connection other then the optical?

It appears the only way to a traditional RCA audio jack is via a special adapter. See image. Inexpensive not sure of the quality of audio.
26116008-vso5kietqzejisjpdhzk3eg3-4-0.jpg26116008-vso5kietqzejisjpdhzk3eg3-4-2.jpg
The best way would be to purchase a sourround sound speaker amp system with 5 speakers plus base woofer. These surround sound systems are usually have optical connected and for best results this would be my first choice.

Some have wireless back speakers to allow for easier installation.

RCA RT2781BE 1000W Home Theater System with Bluetooth This unit has two optical inputs and one digital input.
26116008-vso5kietqzejisjpdhzk3eg3-4-5.jpg
This is an inexpensive surround sound speaker system that should connect to your Panasonic TV optical output. Very available and I wanted to give you at least one option. Wires etc are a mess but the surround sound can be amazing. I would check all the reviews if you decide to go with this type of audio system. They can be confusing and in your case you need to have input control of volume with optical.

The following link is the manual for this particular Home theater System.
http://rcaav.com/wp-content/uploads/2014/11/RT2781BE_IB_0708.pdf

These audio systems can be very expensive. Less expenesive sorround can still provide great listening results.

Hope this helps?

Mar 03, 2016 | Panasonic Tc-p50g20 Viera G20 Series 50"...

1 Answer

No sound picture ok adio output ic good sharp tv model 21V-FW150M


If this is confirmed the fault seems to be in the preamp section or the SIF- sound intermediate frequency section. If you have confirmed that the output is workingg by conneccting an input to the audio input then it should be confirmed that there is no output from the audio line out.
If so you will need to trace using a AF- audio frequency- signal to confirm the area of loss of the AF.
Sometimes this can be some coupling stages or an OP-Amp.
Please trace using a signal and a voltage test. If not get help.

Sep 02, 2011 | Sharp Portable Televisions

1 Answer

Need a code for a hyundai television serial number 6011604481


HYUNDAI HU-TV2121 processor N403 KALORA HHEN16MD01.Videoprotsesor LA76810A - the very bottom hidden button (right of the circuit), click once highlighted FACTORY. More P + and P-switching options.

HYUNDAI C2910, C2519, C2988
1. Set the volume -0
2. Press the remote button "MUTE"
3. While holding "MUTE", press "MENU" on the front of the TV.
4. On the top right corner will light up the letter "D", and in the left corner shows an adjustable parameter and its value.
5. Pages menu change button "CAL"
Switching parameters conducted green and red buttons on a blue field panel. Change made a yellow and blue buttons on a blue field.

HYUNDAI H-LCD2000
To enter service mode simultaneously press "MENU" and "STANDBY".
Press "MENU" again.

HYUNDAI, ITT 29M03 C2131 chassis CPU M37160M8-064FP
In the main menu code 6, 4, 8, 3.
Tools submenu contains the switch to the next of which is done by putting 6, 4, 8, 3.

HYUNDAI 359, 387, 8FHIFI, CB5373Z, 6578F processor CCU SEL04 / SEL07A
Mode 1: Close contact in the hole near the keyboard and just press "S"
Mode 2: Close contact in the hole near the keyboard and just press "S" again and click on contact. Exodus - LOAD.

HYUNDAI processor SAA1293-03-03 SAA1293A
With remote control TV "Horizon" graphics without clicking "SERVICE", the indicator shows a CH, a paz-click on 'appears OP, then choose the volume of registers numbers "1-4" and numbers "1-9" change bits. Then click on "Memory" (you can also lock the pins 15 and 23 in the control circuit SAA1250). Exodus - POWER OFF.

HYUNDAI
chassis CCU11 - "•?" (C) (H)
Chassis CCU12 - close contact in the hole near the keyboard and just press "S". Exodus - LOAD.

HYUNDAI chassis M1, ITT, NOKIA, SALORA 6390, 7190, MV4000, PL14 24 101 852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI processor CCU-SALO-07 (CCU20XX)
entrance "C"> "*"> "O / V"> "#"> "M". Exodus - "power".

HYUNDAI chassis EUROSTEREO-1. DIGIVISION 1963 .. 2, 1971 .. 2, 2 .. N6 processor NES3-... NES2-..
Log "-/--" "MENU" "TV" - for a second. Exodus - POWER OFF.

HYUNDAI chassis STEREO PLUS. 5575SFN, 28T7 processor ST92T93
Entrance - "i" "M" "P +", output - TV.

HYUNDAI 3875EX DIGIVISION
Gun "AV7 universal" fully fit.
Sign in service "1-/11. (Button with painted upper corner). TV must be turned on and display a feed.
Recommended initial value: V.AMP-027. V.LIN-038. S.COR-020. V.POS-023. H.POS-041.H.AMP-022. P.TILT-013. P.AMP-024. P.CORN-007. GREEN-032. RED-032. BLUE-032. V.BRE-005. LUM.DEL-000. AUDIO-032.OPBYT1-002. OPBYT2-064. OPBYT3-000. PRLOSK-000. RESERVE-000. Writing in memory - click "E".
Memory 24c08 can put a clean, turn on TV it propyshe processor itself.

from electronics-planet .blogspot

Jun 12, 2011 | Hyundai Portable Televisions

1 Answer

I need a remote code for my RCA TV . Comcast Cable provided a remote for their digital adapter and was told to enter one of the RCA codes. None would work. Comcast and RCA told me to use both remotes which...


your rca does it have a button for cable. then you can program your tv remote to work with the cable box. go to the manual and try all the codes for rca tv. if this does not work then you have to try it manually. have them give you a different adapter. it might be in the box or remote.

Feb 09, 2010 | Portable Televisions

1 Answer

High audio static on all but one channel of my RCA TV


had this problem for a while only just found the cause, its either your tuner flipped out which means you just neded to retune the tv and it should be fixed if not that there was this setting i found still not sure what it is or means but you could select these letters i think there was S, BG and some other ones but i changed it to the top one which was BG and it fixed the static sound with the clear picture problem just stuff around with the channel settings and see if you have that setting hope that helped

Aug 16, 2009 | RCA Portable Televisions

1 Answer

Will an RCA Digital Convertor work on Durabrands model #1304.?.


Hello chlpepr2,

Yes it should work, connect the RCA video out (yellow connector DTV Converter) to the RCA video in (yellow connector TV set). Then connect the RCA Audio out (Red-Right White-Left DTV converter) to the RCA audio in (Red-Right White-Left TV set).

Then setup your converter box according to the manufacture's instructions.

I hope this helps,

Thank you,

Shuttle83

http://www.electron-age-technologies-llc.com

Jan 20, 2009 | Portable Televisions

1 Answer

Blurry picture


Try to reset first if nothing happens we proceed another solution;

Resetting the TV

Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can saved time.
1. Unplug the TV power cord from the power outlet for 6 hours.in order to dessipitate the charge current.
2. Unplug any connected devices (Satellite, DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

Jan 08, 2009 | RCA E13309 13-Inch Diagonal XL-100¿...

1 Answer

Tried turning on my Sony and no picture no sound, just a black screen


Sony is known for having problems with the picture tube. Sometimes it will blink on and off. also bad connections on the main board. A CRT restorer will sometimes help with picture tube problems but this must be done by a tech that has one.

Apr 11, 2008 | Portable Televisions

Not finding what you are looking for?
Portable Televisions Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Portable Televisions Experts

Blake

Level 2 Expert

136 Answers

kakima

Level 3 Expert

96571 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a RCA Portable Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...