Question about Belkin (F5D7230-4) Router (587009)

1 Answer

Left network key for belkin router behind in states

I left our network key for belkin router behind in states, we are now in KSA(Saudi Arabia). Both of our laptops had problems and when we got them back, we could not go wireless. It is asking for the network key. We had our set up with security due when back in the states. What do I do. I have no access to my network key. Should I just buy a new router?

Posted by on

  • jeannebze Mar 08, 2009

    I did not get my providers ip address to put in, and instead had already connected the wireless and used the one generated from that as my ip address which was wrong and turned out to be the default address, therefore now it won't recognize the wireless and connect to it at all, and I can't access the web based setup either. Please assist if possible, oh and I tried the reset button to no avail.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Try dooing a Compleete reset of your router. there is a tiny tiny hole on the bak side of your router ( sometimes on the front ) and it should say RESET engraved over it, find a tac or a small needle ( maybe toothpick ) and hit the reset butten behind the hole, make shure it says " RESET " over the hole, and dont push to hard, leave router standing for a cupple of minutes and try the default WEP key listed on the underside of your router.

for more details, please visit "http://www.belkin.com/support/article/?lid=en&pid=F5D5231-4&aid=1564&scid=0"

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How open block site in ksa


If you are in Saudi Arabia the best way to open blocked sites is vpn service. Virtual private network is a secure and safe way to open any site and stay anonymous. How to access blocked sites in Saudi Arabia safe and easy Sahrzad VPN Blog

Dec 14, 2013 | Nokia IP 350 Firewall

2 Answers

Social network sites blocked in my office from saudi arabia. Pls give me instruction to open social network using with opera.


Hi Riyasb. All you need is a website to bypass the firewall of your office for all blocked website.
go to vtunnel.com or presidentproxy.com or daveproxy.co.uk from your opera. you can also search the google for more list of social network site unblockers.

Have a strees-free day.

Sep 20, 2011 | Facebook Social Network

1 Answer

Wanna know how to secure my belkin wireless G router.


Setting the router's administrator password

All Belkin Router's ship without an admin password. If you require an admin password then follow the below instructions.

Setup steps:

  1. Connect the computer to one of the four LAN ports on the router.
  2. Open a web browser on the computer.
  3. In the address bar of the web browser, type http://192.168.2.1
  4. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
    login.jpg
  5. Click on System Settings under Utilities on the left-hand side of the opened page.
    systemsettings.jpg
  6. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
    .adminpwd.jpg
  7. Click "Apply Changes". Your new password is now active.

Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "Perform a hardware reset on the router". This will reset the password to its default, as well as erase any and all other settings you may have changed



Configure Wireless Security on Belkin Router - Enable WPA and WEP Why should we setup wireless Security on Belkin Wireless Router ?

After configuring your Belkin router you should secure your wireless network using proper wireless encryption. It can keep wireless hackers away from your wireless network and the unwanted sharing of your Internet connection. In order to know how to login and configure your Belkin wireless router click on the link below.

How to Setup Belkin Wireless Router

Setup Wireless Security in Belkin Wireless Router

Now I hope you just followed the steps mentioned in the above link and log in to your Belkin Wireless Router. In order to enable wireless security on your Belkin router click on Security Under wireless. ( Security tab present on the left side of Belkin configuration page).




belkinwirelessconfigura.png

You can select either WEP or WPA to secure your Belkin Wireless network. To know more about WPA and WEP click on the link below.

Which is better WEP or WPA on your Wireless network


Enable WEP in Belkin Wireless Router


To select WEP for your Belkin wireless network ,click on security mode drop menu and select WEP. WEP is of two kinds WEP 64 bit encryption and WEP 128 bit wireless encryption. You can type your PassPhrase and generate instant wireless key for your Belkin wireless network.

belkinwepsecuritysetup.png

After generating the wireless key, you should save settings by click on Apply changes. Now onwards to login to your Belkin wireless network, you need this wireless key.

Enable WPA in Belkin Wireless Router

WPA is more secure than WEP. To enable WPA on your Belkin router, select WPA from security mode drop down menu.

belkinwpasecurity.png

You should enter a pre-shared key to enable WPA security on your Router. Don't forget to save this WPA settings.

Aug 28, 2011 | Computers & Internet

3 Answers

IS THERE ANY PROXY TO OPEN ANY BLOCK SITE IN KSA


proxyannouncer.com. this will help u out

Jul 18, 2010 | Nokia IP 350 Firewall

1 Answer

Who is a king saudia arabia ?


The King of Saudi Arabia is Saudi Arabia's head of state and absolute monarch. He serves as the head of the Saudi Monarchy and House of Saud.

King Abdullah Bin-Abd-al-Aziz Al Saud.

May 30, 2010 | Yahoo Messenger

1 Answer

I am in riyadh saudi arabia.I have a 2Mbps speed


first check with the speed checking website from ur ISP website

Oct 08, 2009 | Linksys WAG200G Router

Not finding what you are looking for?
Belkin (F5D7230-4) Router (587009) Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...